Due to the COVID 19 epidemic, orders may be processed with a slight delay

Search

In Stock

USB to UART/ESP8266 Adapter Programmer for ESP-01 WiFi Modules with CH340G Chip

Features:

  1. Working voltage: 4.5V – 5.5V (Onboard 3.3v LDO Regulator)
  2. Working current: 300mA (LDO regulator can supply)
  3. Driver Chip: CH340G
  4. Supports all basic windows versions.
  5. The adapter plate integrated 1000μF solid capacitors to ensure the current supply
  6. The power supply will not be a problem to make WIFI module crashes unresponsive.
  7. Using 3225 SMD crystal oscillator, improve the stability of serial work, on a beautiful and tall.

153.40

Compare
SKU:cds-pi-uart-esp-82666

This USB to UART/ESP8266 Adapter Programmer for ESP-01 WiFi Modules with CH340G Chip converts the signal from a USB interface to a PC / laptop to match a serial module ESP8266. This converter module has CH340 chip which is reliable and with high performance. It is compatible with most Windows systems. The adapter features integrated capacitors to maintain a current of 1000 μF.

USB to ESP-01 adapter module has CH340G USB to TTL driver IC onboard, so you can easily use your computer to do ESP-01 functional debugging. ESP-01 serial wifi module can be directly plugged into the yellow pin header without any connecting wire.

Package Includes :

1 x CH340 USB to ESP8266 WIFI Module Adapter Board.

Reviews

There are no reviews yet.

Write a review

Your email address will not be published. Required fields are marked *

Bestsellers

Compare

ENC28J60 Ethernet Module(12 Pin Package: SSOP)

250.16
(0 Reviews)
Features : Fully Compatible with 10/100/1000Base-T Networks Integrated MAC and 10Base-T PHY Supports One 10Base-T Port with Automatic Polarity Detection and Correction Supports Full and Half-Duplex modes Automatic Programmable Retransmit on Collision Programmable Padding and CRC Generation Automatic Rejection of Erroneous Packets SPI Interface with Clock Speeds Up to 20 MHz Chipboard ENC28J60/SS. The board 25MHZ crystal. The network interface board HR911105A. 3.3 V power supply pin. Stable performance. For Arduino, SPI, AVR, PIC, LPC, STM32.
Compare

USB to UART/ESP8266 Adapter Programmer for ESP-01 WiFi Modules with CH340G Chip

153.40
(0 Reviews)
Features:
  1. Working voltage: 4.5V – 5.5V (Onboard 3.3v LDO Regulator)
  2. Working current: 300mA (LDO regulator can supply)
  3. Driver Chip: CH340G
  4. Supports all basic windows versions.
  5. The adapter plate integrated 1000μF solid capacitors to ensure the current supply
  6. The power supply will not be a problem to make WIFI module crashes unresponsive.
  7. Using 3225 SMD crystal oscillator, improve the stability of serial work, on a beautiful and tall.
Compare

PICKIT 3.5 Debugger / Programmer

1,475.00
(0 Reviews)
Specification : USB (Full speed 12 Mbits / s interface to host PC) Real-time execution MPLAB IDE compatible (free download from Microchip) built-in over-voltage / short circuit monitor Firmware upgradeable from PC / web download totally enclosed Diagnostic LEDs (power, busy, error) read/write program and data memory from a microcontroller erase program memory with Verification Freeze peripherals at a breakpoint program up to 512K byte flash with the Programmer to Go ICSP cable included
Compare

TXS0108E High Speed Full Duplex 8 Channel Logic Level Converter

136.88
(0 Reviews)
Features:
  1. It can provide 3.3-5V, 1.8-3.3V level conversion.
  2. PCB Color: Blue.
  3. 8-bit bi-directional 3.3V-5V/5V-3.3V logic level converter board.
  4. Serial communication interface compatible with UART/IIC/SPI port easily to connect.
  5. Ship out by USPS with tracking information and 7-17 days delivery time usually.
  6. Widely used in the MCU and SD card, MCU and serial devices, MCU and 5V/3V module communication.
Compare

ENC28J60 LAN Ethernet Network Board Module (10 PIN) 11/50

352.82
(0 Reviews)
Features:- ENC28J60 Ethernet chips, SOP28 package SPI Interface 1?10 connector can be easily mounted with the MCU Built-in isolation transformer RJ45 connectors HR911105A Power LED Single Supply: +3.3 V 25Mhz Crystal PCB size: 48?18 mm
Compare

VGA to HDTV Converter - Male VGA to HDMI Video Adapter for TV, Computer, Projector with Audio, Power Cable -D-Sub, 15-pin

413.00
(0 Reviews)
Specifications:
  • Mini VGA to HDMI Converter With Audio Adapter.
  • Using the most advanced video processing technology, the image brightness, contrast and color enhancement processing.
  • Product size: about 6 cm * 5 cm * 2 cm.
  • The output format: HDMI.

Back to Top
Product has been added to your cart