Due to the COVID 19 epidemic, orders may be processed with a slight delay

Search

Wishlist (0)
0
Need help? Contact Us on +91-9999-999-999
0

Cart (0)

Wishlist (0)
Need help? Contact Us on +91-9999-999-999
Home>Development Boards>Programmers / Interface Modules>USB To TTL CP2102 Module / USB to Serial (6Pin)

In Stock

USB To TTL CP2102 Module / USB to Serial (6Pin)

Add your review

Features:

  1. Included USB transceiver, without external circuit device
  2. With 3.3V and 5V dual power output
  3. With three LEDs: power indicator, data reception indicator, the data transmission indicator, working status
  4. Meets the USB2.0 specification requirements
  5. With self-recovery fuse. In the event of the accidental short circuit, it can effectively protect your computer USB port and Downloader
  6. Asynchronous serial data bus compatible with all handshake and modulation controller interface signals
  7. The supported data format is 8 data bits, 1 stop bit and parity bits

₹149.86

Wishlist
Compare
SKU:cds-pi-c2102-6

This USB To TTL module is a great tool for embedded systems that require a serial connection to a computer. The board can simply attach to a USB bus and will appear as a standard COM port. This CP2102 doesn’t require any external oscillator, it onboard-board voltage regulator, and it even uses a reprogrammable internal EEPROM for the device description. The full hardware UART has flow control for baud rates from 300bps to 921600bps.

This breakout also allows you to connect the TX/RX pins of your favourite microcontroller or serial application to the RX/TX pins of the breakout, creating a simple serial cable replacement.

Package Includes :

1 x CP2102(6-pin) USB 2.0 to TTL UART serial converter module

Reviews

There are no reviews yet.

Write a review

Your email address will not be published. Required fields are marked *

Bestsellers

Wishlist
Compare
Quick view
Add to cart
Compare

ENC28J60 Ethernet Module(12 Pin Package: SSOP)

₹250.16
(0 Reviews)
Features : Fully Compatible with 10/100/1000Base-T Networks Integrated MAC and 10Base-T PHY Supports One 10Base-T Port with Automatic Polarity Detection and Correction Supports Full and Half-Duplex modes Automatic Programmable Retransmit on Collision Programmable Padding and CRC Generation Automatic Rejection of Erroneous Packets SPI Interface with Clock Speeds Up to 20 MHz Chipboard ENC28J60/SS. The board 25MHZ crystal. The network interface board HR911105A. 3.3 V power supply pin. Stable performance. For Arduino, SPI, AVR, PIC, LPC, STM32.
Add to cart
Wishlist
Compare
Wishlist
Compare
Quick view
Add to cart
Compare

USB to UART/ESP8266 Adapter Programmer for ESP-01 WiFi Modules with CH340G Chip

₹153.40
(0 Reviews)
Features:
  1. Working voltage: 4.5V – 5.5V (Onboard 3.3v LDO Regulator)
  2. Working current: 300mA (LDO regulator can supply)
  3. Driver Chip: CH340G
  4. Supports all basic windows versions.
  5. The adapter plate integrated 1000μF solid capacitors to ensure the current supply
  6. The power supply will not be a problem to make WIFI module crashes unresponsive.
  7. Using 3225 SMD crystal oscillator, improve the stability of serial work, on a beautiful and tall.
Add to cart
Wishlist
Compare
Wishlist
Compare
Quick view
Add to cart
Compare

PICKIT 3.5 Debugger / Programmer

₹1,475.00
(0 Reviews)
Specification : USB (Full speed 12 Mbits / s interface to host PC) Real-time execution MPLAB IDE compatible (free download from Microchip) built-in over-voltage / short circuit monitor Firmware upgradeable from PC / web download totally enclosed Diagnostic LEDs (power, busy, error) read/write program and data memory from a microcontroller erase program memory with Verification Freeze peripherals at a breakpoint program up to 512K byte flash with the Programmer to Go ICSP cable included
Add to cart
Wishlist
Compare
Wishlist
Compare
Quick view
Add to cart
Compare

TXS0108E High Speed Full Duplex 8 Channel Logic Level Converter

₹136.88
(0 Reviews)
Features:
  1. It can provide 3.3-5V, 1.8-3.3V level conversion.
  2. PCB Color: Blue.
  3. 8-bit bi-directional 3.3V-5V/5V-3.3V logic level converter board.
  4. Serial communication interface compatible with UART/IIC/SPI port easily to connect.
  5. Ship out by USPS with tracking information and 7-17 days delivery time usually.
  6. Widely used in the MCU and SD card, MCU and serial devices, MCU and 5V/3V module communication.
Add to cart
Wishlist
Compare
Wishlist
Compare
Quick view
Add to cart
Compare

ENC28J60 LAN Ethernet Network Board Module (10 PIN) 11/50

₹352.82
(0 Reviews)
Features:- ENC28J60 Ethernet chips, SOP28 package SPI Interface 1?10 connector can be easily mounted with the MCU Built-in isolation transformer RJ45 connectors HR911105A Power LED Single Supply: +3.3 V 25Mhz Crystal PCB size: 48?18 mm
Add to cart
Wishlist
Compare
Wishlist
Compare
Quick view
Add to cart
Compare

VGA to HDTV Converter - Male VGA to HDMI Video Adapter for TV, Computer, Projector with Audio, Power Cable -D-Sub, 15-pin

₹413.00
(0 Reviews)
Specifications:
  • Mini VGA to HDMI Converter With Audio Adapter.
  • Using the most advanced video processing technology, the image brightness, contrast and color enhancement processing.
  • Product size: about 6 cm * 5 cm * 2 cm.
  • The output format: HDMI.
Add to cart
Wishlist
Compare
Wishlist
Compare
Quick view
Add to cart
Compare

PICKIT3 USB PIC PROGRAMMER/DEBUGGER

₹1,203.60
(0 Reviews)
Add to cart
Wishlist
Compare

Back to Top
Product has been added to your cart
Close