This 1 meter long USB-TTL Serial converter cable is the easiest way to connect serial TTL devices to PC using USB connector. The cable has total 4 wires out and can also be used to supply 5V, 500mA power from USB port to your circuits and devices. PL2303 chipset inside the USB housing supports various standard baud rates and can be used with Windows based systems with driver support for Win XP, 7,8,10. Also, supports GNU/Linux systems.
In Stock
USB to TTL Converter Serial Cable – PL2303 Based – 4 Wire
- RED Wire – Power 5V, 500mA
- BLACK Wire – Ground
- WHITE Wire – RX
- GREEN Wire – TX
₹177.00
CompareBestsellers
Compare
USB Blaster ALTERA CPLD/FPGA Programmer
₹696.20(0 Reviews)
Features:
- Operating Voltage: 1.5~5V JTAG IO Voltage.
- System configuration: Windows XP, Windows Vista, Windows7, USB interface.
- Stably support SignalTap II embedded logic analyzer function, no mistake while crawling data.
- Fully support all Altera products such as CPLD: MAX3000, MAX7000, MAX9000 and MAXII.
- FPGA: Stratix, StratixII, StratxIII, Cyclone, CycloneII, CycloneIII, ACEX1K, APEX20K and FLEX10K etc.
- Active serial configuration device: EPCS1, EPCS4, EPCS16, EPCS64 etc.
- Enhanced configuration devices: EPC1, EPC4.
- Supports 3 download mode: AS, PS and JTAG.
Compare
I2C ADS1115 16 Bit ADC 4 Channel Module With Programmable Gain Amplifier For RPi
₹297.36(0 Reviews)
Feature:
Wide supply range: 2.0V to 5.5V
Low current consumption: Continuous Mode: Only 150uA Single-Shot Mode: Auto Shut-Down
Programmable data rate: 8SPS to 860SPS
Internal Low-drift voltage reference
Internal oscillator
Internal PGA
I2C interface: Pin-Selectable Addresses
Four Single-ended or two differential inputs
Programmable comparator
This board/chip uses I2C 7-bit addresses between 0x48-0x4B, selectable with jumpers
Compare
PL2303HXD 6Pin USB TTL RS232 Convert Serial Cable
₹324.50(0 Reviews)
Specifications:
- Input Supply voltage: 3.3.~ 5 V
- Connector type: USB To TTL RS232
- Cable length: 80 Cm
- Supports RS-232 serial interface with Programmable baud rate from 75 bps to 12 Mbps
- Compatible with the RS422/RS485 interface
- The cables provide a fast, simple way to connect devices with a TTL level serial interface to USB
- It is USB 2.0 full speed compatible. The USB side of the cable is USB powered.
Compare
ADS1115 16 Bit I2C ADC Analog to Digital Converter Module
₹374.00(0 Reviews)
Features:
- Single-shot mode: automatically turns off
- Low current consumption: Continuous mode 150 μA
- Wide supply voltage range: 2.0V to 5.5V
- Interfacing is done via I2C
- Programmable data rate: 8SPS to 860SPS
- Low drift internal voltage reference
- Internal Oscillator
- Internal PGA up to 860 samples per second (SPS)
- Four single-ended or two differential inputs (ADS1115)
- Operating temperature : -40 ° C to + 140 ° C
- Programmable comparator
Compare
USB RS232 To TTL
₹250.16(0 Reviews)
Features :
- Built-in TTL COM Chip.
- Standard USB type and TTL 4 pin connector
- Simple and Easy way to give USB support to your designs
- Available for Linux, Mac, WinCE, and Windows (XP, 7), Win 8
Compare
I2C IIC Module for 1602 2004 LCD
₹76.70(0 Reviews)
Specifications:
5V power supply.
Serial I2C control of LCD display using PCF8574.
Backlight can be enabled or disabled via a jumper on the board.
Contrast control via a potentiometer.
Can have 8 modules on a single I2C bus (change address via solder jumpers) address, allowing.
Size: 41.6 x 19.2 mm.
Reviews
There are no reviews yet.