Due to the COVID 19 epidemic, orders may be processed with a slight delay

Search

In Stock

USB To RS232 Coverter

Specifications:

  1. CP2102 Based – Better and Faster than Cheap PL2303 based boards
  2. USB specification 2.0 compliant with full-speed 12Mbps.
  3. Supports all Windows (Above Win98), Mac OS (Above 9) & Linux (Above 2.x.x)
  4. Baud rates: 300 bps to 1 Mbps.
  5. Byte receives buffer: 640 byte transmit buffer.
  6. Create a virtual COM port and connect your old devices that use serial port communication
  7. Compatible with both 3.3V & 5V levels
  8. LED indication (ON only when the port is opened and being used, otherwise OFF)
  9. Temperature Range: -40 to +85.

295.00

Compare
SKU:cds-db-o-usb-rs232c

Applications:

  • Easily connect the computer with all Micro-controller Units (MCU) (Supports 3.3V & 5V)
  • All kinds of satellites set-top box upgrade
  •  Router, HDD, ADSL, broadband modem firmware upgrade or cracked upgrade
  • Cellphone, XBOX360, GPS serial communication, vehicle inspection and test, DVD flash, etc
  • Burn writes STC MCU, NXP MCU, Renesas MCU, NEC MCU, etc
  • Simple UART communication, used in UART debugging tools like putty, hyper terminal, etc
  • USB signal can be transferred to both RS232 & TTL signals, may be used by electronic enthusiasts

Reviews

There are no reviews yet.

Write a review

Your email address will not be published. Required fields are marked *

Bestsellers

Compare

MCP2515 Can Bus Shield Board SPI Interface 9 Pins Standard Sub-D Connector Expansion Module

895.62
(0 Reviews)
Features:
  1. SPI Interface up to 10 MHz.
  2. Implements CAN V2.0B at up to 1 Mb/s.
  3. Arduino/ Freaduino Completely compatible.
  4. Industrial standard 9 pin sub-D connector.
  5. Standard (11 bit) and extended (29 bit) data and remote frames
Compare

PAM8403 mini digital Power amplifier 3W Dual Track Red

92.04
(0 Reviews)
Features :
  1. A d-type amplifier without a filter, low quiescent current, and low EMI.
  2. When connects with a 4-ohm load and 5V power supply, the output power can be up to 3W.
  3. Low THD, low noise.
  4. Short circuit protection; thermal protection.
  5. Input Voltage : 2.5-5.5 V(USB power supply).
  6. Output Impedance : 4 ohm.
  7. Efficiency : 90%.
  8. Frequency Response : 150 Hz – 20 KHz.
  9. Input Impedance : 2 Kohm.
  10. Dimensions : 15 x 20 mm.
Compare

TL494 PWM Controller Module Adjustable 5V Frequency 500-100kHz 250mA

413.00
(0 Reviews)
Specifications:
  1. Working voltage: DC 7V-40V
  2. Operating frequency 500Hz-100kHz (adjustable R6)
  3. Maximum output current: 250mA
  4. Output voltage: DC 5V
  5. Size: 26 x 23mm
Compare

USB Logic Analyze 24M 8CH, MCU ARM FPGA DSP Debug Tool

647.82
(0 Reviews)
Specifications:
  1. Logical light indication: a small light indicate CHO electrical level.
  2. Input feature: 5PF,100K Ohm.
  3. USB power supply; USB logic analyzer for monitoring, analyzing and debugging digital circuits
  4. 8-Channels USB logic analyzer with a 24Mhz sampling frequency
  5. Can analyze UART, IIC, and SPI, etc automatically
  6. Great for MCU, ARM system and FPGA development
  7. Voltage: 0-5.5V
  8. Threshold Voltage: 1.5V
Compare

USB To RS232 Coverter

295.00
(0 Reviews)
Specifications:
  1. CP2102 Based – Better and Faster than Cheap PL2303 based boards
  2. USB specification 2.0 compliant with full-speed 12Mbps.
  3. Supports all Windows (Above Win98), Mac OS (Above 9) & Linux (Above 2.x.x)
  4. Baud rates: 300 bps to 1 Mbps.
  5. Byte receives buffer: 640 byte transmit buffer.
  6. Create a virtual COM port and connect your old devices that use serial port communication
  7. Compatible with both 3.3V & 5V levels
  8. LED indication (ON only when the port is opened and being used, otherwise OFF)
  9. Temperature Range: -40 to +85.

Back to Top
Product has been added to your cart