Bestsellers
Compare
USB To RS232 Coverter
₹295.00(0 Reviews)
Specifications:
- CP2102 Based – Better and Faster than Cheap PL2303 based boards
- USB specification 2.0 compliant with full-speed 12Mbps.
- Supports all Windows (Above Win98), Mac OS (Above 9) & Linux (Above 2.x.x)
- Baud rates: 300 bps to 1 Mbps.
- Byte receives buffer: 640 byte transmit buffer.
- Create a virtual COM port and connect your old devices that use serial port communication
- Compatible with both 3.3V & 5V levels
- LED indication (ON only when the port is opened and being used, otherwise OFF)
- Temperature Range: -40 to +85.
Compare
1 Piece Test hook logic analyzer clamp test clip connection hook Yellow / green / blue / black / red / white
₹56.64(0 Reviews)
Test Hook Clip for Logic Analyzer
Color: Multicolor
Compare
AC Light lamp dimming LED lamp and motor Dimmer Module, 1 Channel
₹849.60(0 Reviews)
Features:
- Single-channel AC dimmer Module.
- High-quality BTA16-600B triac
- For indoor and outdoor use.
Compare
Digispark ATTINY85 Mini USB Development Board
₹197.06(0 Reviews)
Features :
- High Performance, Low Power AVR® 8-Bit Microcontroller
- Non-volatile Program and Data Memories
- 8K Bytes of In-System Programmable Program Memory Flash
- Endurance: 10,000 Write/Erase Cycles
- 512 Bytes In-System Programmable EEPROM
- 512 Bytes Internal SRAM
- Peripheral Features
- Two High-Frequency PWM Outputs with Separate Output Compare Registers
- USI – Universal Serial Interface (12C, SPI, 1-wire) with Start Condition Detector
- 10-bit ADC
Compare
ICSP Universal Socket
₹365.80(0 Reviews)
Overview:
Cytron has created this UIC-A so that users can use any programmer regardless of the development board. For example, a development board that uses PICkit2’s socket standard, which is 6-way header pins can be programmed with UIC000B by using the UIC-A!
Compare
MACH3 Interface Board CNC 5 Axis with Optocoupler for Stepper Motor Driver and USB cable
₹689.12(0 Reviews)
Specifications:
- Input Power: Through PC USB port or 12-24V power supply
- Compatible Stepper Motor Driver: Max 5, 2-phase Microstep controllers
- Driver type: Pulse and Direction signal control
- Weight (gm): 78
- Dimensions (mm) LxWxH: 90 x 70 x 20
- Cable Length: 1.4 meter
Compare
MCP2515 Can Bus Shield Board SPI Interface 9 Pins Standard Sub-D Connector Expansion Module
₹895.62(0 Reviews)
Features:
- SPI Interface up to 10 MHz.
- Implements CAN V2.0B at up to 1 Mb/s.
- Arduino/ Freaduino Completely compatible.
- Industrial standard 9 pin sub-D connector.
- Standard (11 bit) and extended (29 bit) data and remote frames
Reviews
There are no reviews yet.