Due to the COVID 19 epidemic, orders may be processed with a slight delay

Search

In Stock

PAM8403 mini digital Power amplifier 3W Dual Track Red

Features :

  1. A d-type amplifier without a filter, low quiescent current, and low EMI.
  2. When connects with a 4-ohm load and 5V power supply, the output power can be up to 3W.
  3. Low THD, low noise.
  4. Short circuit protection; thermal protection.
  5. Input Voltage : 2.5-5.5 V(USB power supply).
  6. Output Impedance : 4 ohm.
  7. Efficiency : 90%.
  8. Frequency Response : 150 Hz – 20 KHz.
  9. Input Impedance : 2 Kohm.
  10. Dimensions : 15 x 20 mm.

92.04

Compare
SKU:cds-db-o-pam8403

The Mini Digital Power Amplifiers 3W Dual Track Red PAM8403 provides Class AB power amplifier performance with Class D amplifier efficiency. The use of low noise, no filter structure can save the traditional D class amplifier output low pass filter. Requires very few external components, thus saving PCB space and system cost, is ideal for portable applications.

The PAM8403 provides 3W of power at efficiencies greater than 90% with both system shutdown and mute control. Special line architecture enhances anti-noise capability and reduces RF interference.
PAM8403 Features: No filter Class D amplifier, low quiescent current, and low EMI, up to 3W output power at 4 load and 5v power supply conditions. Up to 90 ℅ efficiencies, low THD, low noise, short circuit current protection, thermal protection, very few external components, saving cost and space.

Package Includes :

1 x Mini Digital PAM8403 Power Amplifiers 3W Dual Track Red.

Reviews

There are no reviews yet.

Write a review

Your email address will not be published. Required fields are marked *

Bestsellers

Compare

Digispark ATTINY85 Mini USB Development Board

197.06
(0 Reviews)
Features :
  1. High Performance, Low Power AVR® 8-Bit Microcontroller
  2. Non-volatile Program and Data Memories
  3. 8K Bytes of In-System Programmable Program Memory Flash
  4. Endurance: 10,000 Write/Erase Cycles
  5. 512 Bytes In-System Programmable EEPROM
  6. 512 Bytes Internal SRAM
  7. Peripheral Features
  8. Two High-Frequency PWM Outputs with Separate Output Compare Registers
  9. USI – Universal Serial Interface (12C, SPI, 1-wire) with Start Condition Detector
  10. 10-bit ADC
Compare

ICSP Universal Socket

365.80
(0 Reviews)
Overview: Cytron has created this UIC-A so that users can use any programmer regardless of the development board. For example, a development board that uses PICkit2’s socket standard, which is 6-way header pins can be programmed with UIC000B by using the UIC-A!
Compare

MACH3 Interface Board CNC 5 Axis with Optocoupler for Stepper Motor Driver and USB cable

689.12
(0 Reviews)
Specifications:
  1. Input Power: Through PC USB port or 12-24V power supply
  2. Compatible Stepper Motor Driver: Max 5, 2-phase Microstep controllers
  3. Driver type: Pulse and Direction signal control
  4. Weight (gm): 78
  5. Dimensions (mm) LxWxH: 90 x 70 x 20
  6. Cable Length: 1.4 meter
Compare

MCP2515 Can Bus Shield Board SPI Interface 9 Pins Standard Sub-D Connector Expansion Module

895.62
(0 Reviews)
Features:
  1. SPI Interface up to 10 MHz.
  2. Implements CAN V2.0B at up to 1 Mb/s.
  3. Arduino/ Freaduino Completely compatible.
  4. Industrial standard 9 pin sub-D connector.
  5. Standard (11 bit) and extended (29 bit) data and remote frames
Compare

PAM8403 mini digital Power amplifier 3W Dual Track Red

92.04
(0 Reviews)
Features :
  1. A d-type amplifier without a filter, low quiescent current, and low EMI.
  2. When connects with a 4-ohm load and 5V power supply, the output power can be up to 3W.
  3. Low THD, low noise.
  4. Short circuit protection; thermal protection.
  5. Input Voltage : 2.5-5.5 V(USB power supply).
  6. Output Impedance : 4 ohm.
  7. Efficiency : 90%.
  8. Frequency Response : 150 Hz – 20 KHz.
  9. Input Impedance : 2 Kohm.
  10. Dimensions : 15 x 20 mm.
Compare

TL494 PWM Controller Module Adjustable 5V Frequency 500-100kHz 250mA

413.00
(0 Reviews)
Specifications:
  1. Working voltage: DC 7V-40V
  2. Operating frequency 500Hz-100kHz (adjustable R6)
  3. Maximum output current: 250mA
  4. Output voltage: DC 5V
  5. Size: 26 x 23mm

Back to Top
Product has been added to your cart