Due to the COVID 19 epidemic, orders may be processed with a slight delay

Search

In Stock

MQ-7 Module (Carbon Monoxide Gas Sensor)

Features :

  1. Operating voltage: DC 5 V.
  2. The analog output voltage, the higher the concentration the higher the voltage.
  3. The carbon monoxide detection with better sensitivity.
  4. With a long service life and reliable stability.
  5. Rapid response and recovery characteristics.
  6. Range: 10 to 1000 ppm.

149.86

Compare
SKU:cds-s-g-mq-7

MQ-7 CO Carbon Monoxide Coal Gas Sensor Module detects the concentrations of CO in the air and outputs its reading as an analog voltage. The sensor can measure concentrations of 10 to 10,000 ppm.
The sensor can operate at temperatures from -10 to 50°C and consumes less than 150 mA at 5 V.  This module provides both digital and analog outputs. The threshold level for digital output can be easily adjusted using the preset on the board. The MQ-7 sensor module can be easily interfaced with Micro-controllers, Arduino and etc.

Reviews

There are no reviews yet.

Write a review

Your email address will not be published. Required fields are marked *

Bestsellers

Compare

MQ-135 Module (Ammonia, Sulphide and Benzene Gas Sensor)

159.30
(0 Reviews)
Specifications:
  1. Sensitivity to Ammonia, Sulphide and Benzene steam
  2. Sensitive for benzene, alcohol, smoke
  3. Fast response and recovery
  4. Adjustable sensitivity
  5. Signal output indicator
  6. Output voltage boosts along with the concentration of the measured gases increases
Compare

PM2.5 GP2Y1010AU0F Dust Smoke Particle Sensor

494.42
(0 Reviews)
Features:
  1. Power supply voltage: DC5 ± 2V
  2. Sensitivity: 0.5V / (0.1mg / m3)
  3. The minimum detection level of particles: 0.8 m
  4. Clean air voltage: 0.9V typ.
  5. Low consumption current (Icc: MAX. 20 mA)
  6. The presence of dust can be detected by the photometry of only one pulse
  7. Enable to distinguish smoke from house dust
Compare

MQ-2 Modules

149.86
(0 Reviews)
Specifications : 1. Good sensitivity to Combustible gas in a wide range 2. High sensitivity to LPG, Propane, and Hydrogen 3. Long life and low cost 4. Simple drive circuit 5. Can be used as a Digital or analog sensor 6. The Sensitivity of Digital pin can be varied using the potentiometer 7. Can be used to Measure or detect LPG, Alcohol, Propane, Hydrogen, CO and even methan
Compare

MQ-3 Module (Alcohol Gas Sensor)

159.30
(0 Reviews)
Secifications:
  1. Sensitive to alcohol, ethanol
  2. Fast response and recovery
  3. Adjustable sensitivity
  4. Signal output indicator
  5. Analog and level signal output.
  6. The carbon monoxide detection with better sensitivity.
  7. Has a long service life and reliable stability.
  8. Output voltage boosts along with the concentration of the measured gases increases
Compare

MQ-4 Module (Methane ,CNG Gas Sensor)

149.86
(0 Reviews)
Secifications: 1. Detecting range: 300~10000ppm 2. Signal output indicator 3. Dual Signals output (analog output and TTL output) 4. TTL output signal is low level, allows to connect with SCM directly 5. Analog output 0~5V voltage 6. High sensitivity 7. Long working lifetime and stable performance 8. Quick response and recovery
Compare

MQ-5 Module (LPG Gas Sensor)

149.86
(0 Reviews)
Specifications : 1. High sensitivity to LPG, natural gas, town gas. 2. Small sensitivity to alcohol, smoke. 3. Stable and long life. 4. Simple drive circuit. 5. Fast response.
Compare

MQ-6 Module (LPG, Ethenol steam, Smoke Interference)

149.86
(0 Reviews)
Secifications:
  1. Operating Voltage: 5V DC
  2. Indication of the signal output
  3. Dual signal output (analog output, and TTL level output)
  4. 0 ~ 5V analog output voltage, the higher the concentration, the higher the voltage
  5. High sensitivity to hydrogen
  6. Can be resistant to ethanol steam, LPG (petroleum), smoke interference
  7. Has a long life and reliable stability
  8. Fast response and recovery characteristics

Back to Top
Product has been added to your cart