Due to the COVID 19 epidemic, orders may be processed with a slight delay

Search

In Stock

Mini Motor Drive Shield Expansion Board L293D Module for Arduino UNO MEGA 2560

Specifications:

  1. New L293D motor shield, the input voltage DC4.5-25V
  2. 600mA output current capability per channel
  3. 1.2A peak output current(non-repetitive) per channel
  4. Enable facility
  5. Overtemperature protection
  6. Logical “0” input voltage up to 1.5V(High noise immunity)

129.00

Compare
SKU:cds-a-as-mmds

Mini Motor Drive Shield Expansion Board L293D Module for Arduino UNO MEGA 2560  is a Device is a monolithic integrated high voltage, high current four channel driver designed to accept standard DTL or TTL logic levels and drive inductive loads (such as relays solenoids, DC and stepping motors) and switching power transistors.

To simplify use as two bridges each pair of channels is equipped with an enable input. A separate supply input is provided for the logic, allowing operation at a lower voltage and internal clamp diodes are included. This device is suitable for use in switching applications at frequencies up to 5 kHz.

Package Includes:

1 x Mini Motor Drive Shield Expansion Board L293D Module.

Reviews

There are no reviews yet.

Write a review

Your email address will not be published. Required fields are marked *

Bestsellers

Compare

Proto Screw Shield 1.0 For Arduino Uno

358.72
(0 Reviews)
Specifications:
  1. Arduino terminal to provide the IO, port connection.
  2. 3.81 posts quality, reliable, convenient, durable.
  3. Combined with the Proto Shield, the middle can be used as a prototype expansion board.
  4. Double-sided PCB Prototyping extended area vias connecting the front sides can be welded components.
  5. The middle section can be placed small bread plate, convenient test extend
Compare

CNC Shield V4.0 3-Axis Stepper Motor Drive Board

236.00
(0 Reviews)
Features :
  • 3 Axis stepper motor driver.
  • Compatible with a micro-drive laser engraving machine, three-axis CNC engraving machine.
  • 2A can be controlled within the two-phase four-wire stepper motor.
  • Power DC5V interface, 7.5-12V voltage input.
  • GRBL compatible.
  • Worked with Arduino nano.
Compare

Prototype Shield V3.0 For Arduino Mega with breadboard

310.34
(0 Reviews)
Quick Overview:
  1. The shield can support being fully assembled with Arduino MEGA
  2. Support soldering components directly on this shield
  3. Support sticking the mini breadboards on this shield
  4. Reset button up top
  5. Mainboard aureate quadrate
  6. With SOP28 SMT components encapsulation
Compare

Cytron 10A Motor Driver Shield - MD10

1,563.50
(0 Reviews)
Specifications:
  1. Bi-directional control of 1 brushed DC motor.
  2. Support motor voltage ranges from 7V to 25V, .
  3. Maximum current up to 10A continuous and 15A peak (10 seconds).
  4. Solid state components provide faster response time and eliminate the wear and tear of a mechanical relay.
  5. Fully NMOS H-Bridge for better efficiency and no heat sink is required.
  6. Speed control PWM frequency up to 10KHz.
  7. Selectable digital pins for PWM and DIR.
Compare

Ramps 1.4 Board 3D Printer Control Panel Mega Shield

587.64
(0 Reviews)
Specifications:
  1. Supply Voltage: 12V
  2. Standard interfaces (as that of the extruder)
  3. Reserved GCI like I2C and RS232
  4. 3 MOSFET’s are applied to the heater/ fan and thermistor circuit.
  5. Another 5A added to protect the component parts.
  6. An 11A fuse is added to the hotbed.
  7. Support 5 stepper drive board
Compare

Cytron Arduino PS2 Shield

1,348.74
(0 Reviews)
Specifications:
  1. 5V powered low current consumption.
  2. Simple to use UART protocol
  3. Vibrator motor on PS2 is controllable.
  4. Wired and Wireless PS2 controller is supported.
  5. PS2 Controller will automatically operate in analog mode.
  6. A status LED
  7. Jumper selector to select different UART Baud Rate (9600, 57600, 115200).
  8. Jumper selectors to select different digital pin as UART TX and RX pin.
Compare

Screw Shields V2 Terminal Expansion Board

313.88
(0 Reviews)
Specifications:
  1. Dimensions : 66 x 19 x 16 (LxWxH) mm.
  2. Weight: 28 gm.
  3. I/O Screw terminals.
  4. Directly plug-able.
  5. Arduino Compatible.
  6. Compatible with Arduino UNO R3, Arduino UNO

Back to Top
Product has been added to your cart