Due to the COVID 19 epidemic, orders may be processed with a slight delay

Search

In Stock

Laser Receiver Sensor Photo Diode BPW34

Specifications:

  • Switching Speed: 20nS
  • Open Circuit Voltage: 350mV
  • Diode Capacitance: 70pF (1MHz, Vr=0V)
  • Reverse Breakdown Voltage: 60V
  • Rise and Fall time: 100ns (each)

59.00

Compare
SKU:cds-s-l-lrspd

The Laser Receiver Sensor Photo Diode BPW34 is a high speed photodiode with good photo sensitivity. It responds to visible and near infrared radiation. It has a breakdown voltage of 60V with a rise and fall time of 100ns that is a switching speed of 20nS.

Like all photo diode, the BPW34 is normally operated in series with a resistor and the current flowing though it depends on the amount of light falling on it. The intensity of light is measured in luminance.

Applications:

  • Photointerrupters
  • IR Remote Controles
  • Industiral Electronics
  • For Control And Dirve Circuits

Package Includes:

  • 1 x Laser Receiver Sensor Photo Diode BPW34

Reviews

There are no reviews yet.

Write a review

Your email address will not be published. Required fields are marked *

Bestsellers

Compare

12mm 5mW Red Point Laser Module MXD1230 Point Spot Size Adjustable Laser

267.86
(0 Reviews)
Specifications:
  1. Laser Output Type: Red Point Laser
  2. Weight: 15 gm.
  3. Wavelength: 650nm
  4. Input Current: 40mA
  5. Input Voltage: 3~6V DC
  6. Output Power: Min 2.5mW, Typical 3.0mW, Max 5.0mW
  7. Focus point Intensity can be adjusted with the help of lens ring head
  8. Cable Length: 130mm
Compare

650nm 6mm 5V DC 5mW Mini Laser Dot Diode Module

65.50
(0 Reviews)
Specifications:
  1. Output Power: 5mW
  2. Working Voltage: 5V DC
  3. Working temperature: -10 ℃~+40 ℃
  4. Housing material: Copper
  5. Working life: more than 2000 hours
  6. Spot mode: Dot Facula (continuous output)
  7. Laser wavelength: 650nm red-colored.
  8. Operating current: <40mA
  9. Power lead length: 120mm.
Compare

Black Aluminum Heat Sink Holder for 12mm Laser Module

254.88
(0 Reviews)
Features:
  1. Inner Hole diameter For Laser Module: 12 mm
  2. Material: Aluminium alloy
  3. Anodized on the surface; effective antioxidant
  4. In can be installed directly on the laser gimbal
  5. For the heat dissipation of the laser module
  6. Sturdy and durable
  7. Easy to install with efficient heat dissipation
Compare

Laser Module 650NM 5V

100.30
(0 Reviews)
Specifications:
  1. Voltage: 3.0 V – 5 V.
  2. Driver: APC circuit.
  3. Line length: about 135 mm.
  4. Transmit power: 58mW.
  5. Operating Current: 40mA.
  6. Operating Current: 40mA.
  7. Operating temperature: -36◦C ~ 65◦C.
Compare

Laser Non-modulator Tub Sensor Receiving Module Laser output High Level

109.74
(0 Reviews)
Specifications:
  1. Working Voltage: 5V DC
  2. Operating Temperature: -30ºc ~ 85ºc
  3. Output high level when received the laser signal
  4. Output low level when not receive laser signal.
  5. Application: Electronic Circuits
Compare

Laser Receiver Sensor Photo Diode BPW34

59.00
(0 Reviews)
Specifications:
  • Switching Speed: 20nS
  • Open Circuit Voltage: 350mV
  • Diode Capacitance: 70pF (1MHz, Vr=0V)
  • Reverse Breakdown Voltage: 60V
  • Rise and Fall time: 100ns (each)
Compare

MXD1230 6mm 650nm 5mW Red Line Laser Module

248.98
(0 Reviews)
Specifications:
  1. Laser Output Type: Red LINE Laser
  2. Weight: 15 gm.
  3. Wavelength: 650nm
  4. Voltage: 3~6V
  5. Output Power: Min 2.5mW, Typical 3.0mW, Max 5.0mW
  6. Working current: Min 10mA, Typical 20mA, Max 25mA
  7. Working voltage: Min 2.3VDC, Typical 4.5VDC, Max 8.0VDC

Back to Top
Product has been added to your cart