Due to the COVID 19 epidemic, orders may be processed with a slight delay

Search

In Stock

ISD1820 Voice Recording Module With Speaker

Features :

  1. An easy to use 10 seconds of voice recording.
  2. High-quality, natural voice restored.
  3. Can be used as a propaganda module.
  4. With looping, jog playback, single-pass play function.
  5. Available single-chip control.
  6. This module can directly drive a small speaker 8 ohms 0.5W.
  7. Audio recording control mode: the key to control or microcontroller, IO has drawn the line of control.

250.16

Compare
SKU:cds-s-ss-isd-1820

This is ISD1820 Recording Module Voice Board With On Board Mic and Loud Speaker. The ISD1820 Recording Module Voice Board is the real easy way to add Voice Recording (and Playback) to your project. The Module can be operated directly by using the 3 Push-Buttons or with every microcontroller (ex. Arduino).

A microphone is implemented directly on the board, and you can connect any 8 Ohm Speaker. Your recordings are saved even without power due to the non-volatile storage on the ISD1820.

This module uses the ISD1820 voice record and playback IC to record a single voice message of up to 10 seconds in length. The recorded message is stored in its specialized analog flash memory that will keep the message stored even when power is removed.

The module includes an electret microphone to record your message and push buttons to allow for the record, partial playback, or full playback of the message. Header pins allow for easy interface to a microcontroller and playback can be controlled with just one digital pin.

The package includes an 8 Ohm 0.5W speaker and cable which can be connected directly to the modules speaker output.

Package Includes :

1 x ISD1820 Recording Module.

1 x Loud Speaker.

Reviews

There are no reviews yet.

Write a review

Your email address will not be published. Required fields are marked *

Bestsellers

Compare

MP3-TF-16P MP3 SD Card Module with Serial Port

198.24
(0 Reviews)
Specifications:
  1. Input Supply voltage (V): 3.2 ~ 5
  2. DAC output: 24-bit
  3. SNR: 85 dB
  4. Operating Temperature (°C) : -40 ~ +70
  5. Humidity Range: 5% ~ 95%
  6. Supports sampling rates (KHz): 8 / 11.025 / 12/16 / 22.05 / 24/32 / 44.1 / 48
Compare

PAM8403 5V TWO CHANNEL STEREO MINI CLASS-D 3W+3W AUDIO AMPLIFIER

73.16
(0 Reviews)
Specifications:
  1. Operating Voltage Range: 5V – 5.5V.
  2. Max Gain: 24 dB
  3. Current Handling Capacity: 8 mA
  4. Efficiency: 87 %.
  5. Amplifier: IC PAM 8403.
  6. Load Can direct drive 4 or 8 ohm small speakers.
Compare

Pam8403 mini 5v digital amplifier board with switch potentiometer

106.20
(0 Reviews)
Specifications:
  • Updated version, quality is improved! Everything you need except a power supply for adding sound to a project..
  • PAM8403 – Powerful and small Class D amplifier mounted on a 28 x 20 mm breakout board. Includes a super smooth potentiometer combination volume / on-off knob. Also includes header pins..
  • Mini speakers – 2 pcs. 4 ohm, 3w, 31 mm x 70 mm. The same speakers found in flatscreen TV’s and monitors..
  • 3.5 mm cord – Includes 50 cm (19 in) headphone style cord and plug for easy phone or Raspberry Pi connection.
Compare

Raspberry Pi USB Plug and Play Desktop Microphone

198.24
(0 Reviews)
Specifications:
  •  Sensitivity: -47dB ± 4dB
  •  Sensitivity reduce: -3dB at 1.5V
  •  Working Voltage: 4.5V
  •  Frequency response: 100 ~ 16kHz
  •  SNR: More than -67dB
  •  Cable length: 0.7-0.9M
  • The effective distance of 2 meters or more
Compare

Sound Detection Module Sensor for Intelligent Vehicle Compatible With Arduino

97.94
(0 Reviews)
Specifications:
  1. Signal output Indication
  2. Single channel signal output
  3. The output effective signal is low level.
  4. Main chip: LM393, Electret condenser microphone
  5. Working voltage: DC 3.3-5V
  6. Induction distance is 0.5m
Compare

Sound Sensor Module Digital Output

100.30
(0 Reviews)
Specifications:
  1. Working voltage: DC 3.3-5V.
  2. Signal output indication.
  3. The output is digital.
  4. Single-channel signal output.
  5. With the retaining bolt hole, convenient installation.
  6. Output low level and the signal light when there is sound.
Compare

6-12VDC Mini Microphone Pickup Aerial Audio Signal Collection For Camera FPV QAV250 mini Quadcopter

198.24
(0 Reviews)
Specifications:
  • Supply Voltage: 6-12VDC
  • Frequency Range: 100-5500 Hz
  • Output: 2.5Vpp/-25db
  • Low noise
  • High fidelity
  • Wide working voltage range
  • Low power consumption
  • Long transmission distance

Back to Top
Product has been added to your cart