Due to the COVID 19 epidemic, orders may be processed with a slight delay

Search

In Stock

Float Sensor Water/Liquid Level Switch White (40 MM)

Specifications:

  1. Contact Rating: 10 W.
  2. Switching Voltage: 220 V.
  3. Switching Current: 0.5 A.
  4. Breakdown Voltage: 220 VDC.
  5. Carry Current: 1 A.
  6. Contact Resistance: 100 mΩ.

236.00

Compare
SKU:cds-s-wm-fs-40mm

A float switch is a device used to sense the level of liquid within a tank.The switch may actuate a pump, an indicator, an alarm, or other device. Use them with hydroponics, saltwater tank, freshwater tank, gardening, aquariums for power head control, pet bowls, fish tanks, filtration, heating, pumps, ponds, basement alarms, boats, air condition drain pans, pressure washers, carpet cleaning mach, reef aquarium, fluid control, ice machines, coffee pots, marine, automotive, automobiles, tropical fish tanks, evaporator coils, condensation line, in relays, or what ever your project may be.It can be easily converted from normally open to normally close by inverting the float.

Package Includes:

1 x Float Sensor Water/Liquid Level Switch White (40 MM)

Reviews

There are no reviews yet.

Write a review

Your email address will not be published. Required fields are marked *

Bestsellers

Compare

Turbidity Sensor

1,099.76
(0 Reviews)
Specification
  • Ratio Range (NTU):0-1000±30
  • Analog Output
  • Infrared Emitting Diode:940nm(Peak emission wavelength)
  • Photo Transistor:880nm(Peak emission wavelength)
  • Vcc: 5V
  • Output Voltage: 0-5V
  • Reverse Voltage: 5V
  • Operating Temp:-20~+90
Compare

Turbidity Sensor With ADC Circuit

1,799.50
(0 Reviews)
Specifications:
  1. Operating Voltage: 5V DC
  2. Operating Current: 40mA (MAX)
  3. Response Time : <500ms
  4.  Insulation Resistance: 100M (Min)
  5. Output Method:
  6. Analog output: 0-4.5V
  7. Digital Output: High/Low-level signal (you can adjust the threshold value by adjusting the potentiometer)
  8. Operating Temperature: 5Ԩ~90Ԩ
  9.  Storage Temperature: -10Ԩ~90Ԩ
  10.  Weight: 30g
  11. Adapter Dimensions: 38mm*28mm*10mm/1.5inches *1.1inches*0.4inches
Compare

Turbidity Sensor with Module

894.98
(0 Reviews)
Specifications:
  1. Operating Voltage: 5VDC.
  2. Current: 30mA (MAX).
  3. Operating temperature: -30 ° C to 80 ° C.
  4. Compatible with Arduino, Raspberry Pi, AVR, PIC, etc.
  5. Measuring Range: 0 ~ 1000 NTU.
Compare

WATER FLOW SENSOR BIG YFG1

802.40
(0 Reviews)
Specifications: Mini. Working Voltage: DC 4.5V Working Voltage: DC 5V~18V Flow Rate Range: 2~100L/min Water pressure resistance: = >2MP Operating Temperature: = -20~85C Insulation resistance: = >100MΩ Characteristics of Flow pulse: f=(4.8*Q) Q=L/Min Accuracy: ±3% Connector type: G1
Compare

Capacitive Soil Moisture Sensor V2.0

188.80
(0 Reviews)
Specifications:
  1. Operating Voltage: 3.3 ~ 5.5 VDC.
  2. Operating Current: 5mA.
  3. Interface: PH2.54-3P.
  4. Dimensions mm(LxWxH): 98 x 23 x 4.
  5. Supports 3-Pin Gravity Sensor interface
  6. Analog output.
  7. Weight (gm): 15.
Compare

Water Flow Sensor YF-S401 Flowmeter 0.3-6L/min 2mm White

472.00
(0 Reviews)
Specifications:
  1. Model: YF-S401
  2. Working Voltage: DC 5V~24V
  3. Maximum Working Current: 15mA @ 5V DC
  4. Flow Rate Range: 0.3~6L/min
  5. Outer diameter: 7mm
  6. Inner Diameter: 4mm
  7. Load Capacity: ≤10mA (DC 5V)
  8. Operating Temperature: ≤80℃
  9. Liquid Temperature: ≤120℃
  10. Operating Humidity: 35%-90%RH
  11. Water Pressure: ≤0.8MPa
Compare

Float Sensor Water/Liquid Level Switch Black

236.00
(0 Reviews)
Specifications:
  1. Rating contract (Max.): 10 W
  2. Switching power supply (Max.): 110VDC
  3. Resistance contract (Max.): 100 Ω
  4. Appro. Float Ball Size (mm) : 24×17 (LxD)
  5. Body Total Length (mm) : 85
  6. Cable Length (cm) : 37

Back to Top
Product has been added to your cart