Due to the COVID 19 epidemic, orders may be processed with a slight delay

Search

In Stock

Emax BLHeli Series 12A ESC with Oneshot (Original)

Specification:

  1. Constant Current: 12A.
  2. ESC Type: Brushless.
  3. Burst Current: 15A.
  4. Battery: 2-4S Lipo.
  5. BEC: 5 V / 1A.
  6. Support: Oneshot 125 Protoc

732.78

Compare
SKU:cds-mdr-bmd-12a-esc

Emax BLHeli Series 12A ESC with Oneshot Based on BLHeli firmware further optimized to the perfect drive performance. It has Low-voltage protection, over-heat protection, and throttle signal loss protection.

The ESC comes with a Separate power supply for MCU and BEC, enhancing the ESC’s ability to eliminate magnetic interference. The Parameter of this ESC can be set via a program card or transmitter. Throttle range can be set to be compatible with different receivers. Equipped with built-in linear BEC or switch BEC. Max speed: 210,000 rpm for 2-pole, 70,000 rpm for 6-pole, 35,000 rpm for 12-pole.

Reviews

There are no reviews yet.

Write a review

Your email address will not be published. Required fields are marked *

Bestsellers

Compare

SimonK 30A BLDC ESC Electronic Speed Controller Without Connectors

440.14
(0 Reviews)
Specification:
  • Model: SIMONK 30A.
  • Constant Current: 30A (Max 40A < 10 sec).
  • BEC: 5V 2A.
  • Suitable Batteries: 2-3S LiPo.
  • Application: BLDC Motors, Multirotor, Rc Planes etc.
Compare

SimonK 30A Brushless Speed Controller ESC Multicopter Helicopter Airplane - Good Quality

549.88
(0 Reviews)
Specification:
  • MODEL: STANDARD 30A BLDC ESC ELECTRONIC SPEED CONTROLLER
  • WEIGHT: 23g
  • DIMENSIONS: 45 x 24 x 9 mm(LxWxH)
  •  Color: Yellow/Red(Depends on Availability)
  • CURRENT (A): 30A
  • BEC: 3A
  • Li-Poly: 2-3
  • Ni-Mh/Ni-CD: 4-10 Ni-Mh
  • CONSTANT CURRENT: 30A Max 40A<10s
  • Li-Poly 2-3 CELLS; Ni-MH 4-10 CELLS Auto Detect
  • Break On/Off
  • Auto Low BATTERY Slow down at 3.0V/cell Lipo, cut-off at 2.9V/cell lipo
  • APPLICATION: Multirotors, Rc Airplanes, etc.
Compare

SimonK 30A ESC with connectors Red

322.14
(0 Reviews)
Features:
  1. High-quality MOSFETs for BLDC motor drive
  2. High-performance microcontroller for best compatibility with all types of motors at greater efficiency
  3. Fully programmable with any standard RC remote control
  4. Heat sink with high-performance heat transmission membrane for better thermal management
  5. 3 start modes: Normal / Soft / Super-Soft, compatible with fixed-wing aircraft and helicopters
  6. Throttle range can be configured to be compatible with any remote control available in the market.
Compare

Standard 30A ESC Yellow with connectors

448.40
(0 Reviews)
Specification:
  1. Constant Current: 30A (Max 40A < 10 sec).
  2. BEC: 5V 2A.
  3. Suitable Batteries: 2-3S LiPo.
  4. Application: BLDC Motors, Multirotor, Rc Planes etc.
Compare

5V-12V DC Brushless Driver Board Controller For Hard Drive Motor 3/4 Wire

534.54
(0 Reviews)
Features: 
  • Drive Voltage: DC 5-12V
  • Work Current: ≤1.2A
  • Speed Range: 0% – 100%
  • Dimension: 46 X 61 mm / 1.81”X2.40”
Compare

TURNIGY Plush 10amp 9gram Speed Controller

785.88
(0 Reviews)
  • Cont Current: 10A
  • Burst Current: 12A
  • BEC Mode: Linear
  • BEC : 5v / 2A
  • Lipo Cells: 2-4
  • NiMH : 5-12
  • Weight: 9g
  • Size: 27x17x6mm
Compare

DYS 30A Brushless Speed Controller ESC Simonk Firmware for Multicopter

934.56
(0 Reviews)
Specifications:
  1. Model: DYS 30A Brushless ESC.
  2. Constant Current: 30 A.
  3. Burst Current: 40A for 10 sec.
  4. BEC: 5V / 2A.
  5. Suitable Batteries: 2~4S.
  6. Color: Black/ Blue.

Back to Top
Product has been added to your cart