Due to the COVID 19 epidemic, orders may be processed with a slight delay

Search

In Stock

E18-D80NK IR Proximity Sensor (PNP)

Specifications:

Sensing range: 3 – 80cm.
Input voltage: 5VDC.
Current Consumption: 100mA.
Digital Output.
Cable length: 115 cm.
Diffuse reflective type
Digital output
Adjustable detection distance

306.80

Compare
SKU:cds-s-ims-pnp

The Adjustable Infrared Sensor Switch is a set of transmitter and receiver in one of the photoelectric switch sensor. The detection distance can be adjusted according to the demand. The sensor has a detection range of 3-80cm. The Adjustable Infrared Sensor Switch is small, easy to use, inexpensive, easy to assemble and can be widely used in a robot to avoid obstacles, interactive media, industrial assembly lines, and many other occasions. The switching signal output differs in accordance with the obstacles. It remains high when no obstacles and remains low when there are obstacles. There is a bright light behind the probe to detect the scope of 3cm – 80cm.

Connection
Red wire: +5V
Green wire: GND
Yellow wire: Digital output

OR

Brown wire: +5V
Blue wire: GND
Black wire: Digital output

Reviews

There are no reviews yet.

Write a review

Your email address will not be published. Required fields are marked *

Bestsellers

Compare

CL203 Light Control Sensor (Photocell)

330.40
(0 Reviews)
Specifications:
  • Detection range: 180 deg.
  • Detection Distance: 12m max(<24 deg.)
  • Working Temperature: -20~+40 deg.
  • Working Humidity: <93% RH
  • Power consumption: approx. 0.5W
  • Installation Height:1.8-2.5m
  • Detection Moving Speed:0.6-1.5m/s
Compare

TSOP Sensor Module

149.86
(0 Reviews)
Features:
  1. There is an obstacle, the green indicator light on the circuit board
  2. Detection distance: 2 ~ 30 cm
  3. Detection angle: 35°
  4. Comparator chip: LM393
  5. 3mm screw holes for easy mounting
Compare

Infrared Motion Sensor CL70

698.99
(0 Reviews)
Specifications:
  1. Automatic induction: to enter the sensing range
  2. Ultra-small size.
  3. Repeatable trigger
  4. Wide operating voltage range
  5. Micropower: quiescent current <50
  6. Output high signal: easy docking and all kinds of circuits.
Compare

Motor Encoder Light Blocking Sensor Module

100.30
(0 Reviews)
Specifications:
  1. Using imported groove optical coupling sensor, width 5mm.
  2. It have the output state light, if output high level, the lights are off. if output low level ,it on.
  3. If it covered, it will output high level; otherwise it output low level.
  4. Good signal and waveform, with strong driving ability for more than 15mA.
  5. The working voltage of 3.3V to 5V
  6. Output: digital switch output (0 and 1)
  7. Equipped with a fixed bolt hole, easily install.
  8. Use the LM393 wide voltage comparer
Compare

E18-D80NK IR Proximity Sensor (NPN)

306.80
(0 Reviews)
Specifications:
  1. Sensing range: 3 – 80cm.
  2. Input voltage: 5VDC.
  3. Current Consumption: 100mA.
  4. Digital Output.
  5. Cable length: 115 cm.
  6. Diffuse reflective type
  7. Digital output
  8. Adjustable detection distance
Compare

TSOP1738 Module I-Robotics

100.30
(0 Reviews)
Specifications:
  1. Range: 25 C to +85 C
  2. Power Consumption: 0.4 to 1.0 mA
  3. Supply Voltage: 5V
  4. Supply Current: 5mA
  5. Model/Type: TSOP1738
Compare

IR Receiving Head VS1838B Remote Control Receiver - 5pcs

69.62
(0 Reviews)
Specifications:
  1. Internal filter for PCM frequency.
  2. Inner shield, good anti-interference ability.
  3. High immunity against ambient light.
  4. Improved shielding against electric field disturbance
  5. 3.0V or 5.0V supply voltage; low power consumption.
  6. TTL and CMOS compatibility.
  7. Suitable transmission code:NEC code,RC5 code.
  8. Universal receiver. 38 KHz.
  9. Infrared remote control receiver.

Back to Top
Product has been added to your cart