Due to the COVID 19 epidemic, orders may be processed with a slight delay

Search

In Stock

CJMCU-TRRS 3.5mm Jack AV Stereo Module

Features :

  1. Mini design, portable and easy to use.
  2. It is the audio-style connectors that you see on some phones, MP3 players, and development boards.
  3. TRRS stands for “Tip, Ring, Ring, Sleeve,” which reflects the fact that, unlike a standard stereo connector, this actually has three conductors and a ground.
  4. Some devices use the extra conductor for a microphone (like hands-free headsets) or to carry a video signal (like in some MP3/MP4 players).

71.98

Compare
SKU:cds-bb-CJMCU-trrs

CJMCU-TRRS 3.5mm Audio MP3 Stereo Headphones Video Microphone Interface Module comes with the audio-style connectors that you see on phones. It is widely used in MP3 players and development boards.

TRRS stands for “Tip, Ring, Ring, Sleeve,” which reflects the fact that, unlike a standard stereo connector. This actually has three conductors and a ground. Some devices use the extra conductor for a microphone (like hands-free headsets) or to carry a video signal (like in some MP3/MP4 players).

This breakout board makes it easy to add a TRRS jack to your prototype or project by breaking out each conductor to a standard 0.1 spaced header.

Package Includes :

1 × CJMCU-TRRS 3.5mm Audio MP3 Stereo Headphones Video Microphone Interface Module

1 x (Straight) 6*1 Burg Pin- 1pcs

Reviews

There are no reviews yet.

Write a review

Your email address will not be published. Required fields are marked *

Bestsellers

Compare

CJMCU-1286 PIC16F1823 Microcontroller Development Board

413.00
(0 Reviews)
Features:
  • CJMCU-1286 is a PIC microcontroller minimum system,
  • Running stability and high reliability
  • SCM internal resources are relatively small,
  • The microcontroller is simple and convenient to use.
  • The operating voltage is 1.8V – 5.5V.
Compare

I2C Bi-Directional logic Level Converter- 4 Channel

60.18
(0 Reviews)
Specifications:
  1. Mutual transform between 5V TTL and 3.3V TTL
  2. Four channels of logic and high voltage low voltage logic can two-way transform
  3. Portable and lightness, with 2 rows 6 pin contact pins
  4. Level Converter- 4 Channel Compatible with the bread plate, can be used directly put on the breadboard
  5. 4 Channel Module (great for I2C or SPI) and will work with all microcontrollers, Arduino, Raspberry Pi, Intel Edison, NXP Mbed
Compare

CJMCU-2551 MCP2551 CAN Protocol Controller High-speed Interface Module

248.98
(0 Reviews)
Features:
  1.  Supports 1 Mb/s operation
  2. Suitable for 12V and 24V systems
  3. The externally-controlled slope for reduced RFI emissions
  4.  Detection of ground fault (permanent Dominant) on TXD input
  5. Power-on Reset and voltage brown-out protection
  6. An unpowered node or brown-out event will not disturb the CAN bus
  7. Low current standby operation
  8. Protection against damage due to short-circuit conditions (positive or negative battery voltage)
  9. Protection against high-voltage transients
  10. Automatic thermal shutdown protection
  11. Up to 112 nodes can be connected
  12. High-noise immunity due to differential bus implementation
  13. Temperature ranges: – Industrial (I): -40°C to +85°C – Extended (E): -40°C to +125°C
Compare

Logic Level Converter 5V TO 3.3V / 3.3V to 5V

63.72
(0 Reviews)
Overview:
  • Do you have a 3.3V I2C or SPI sensor that might go up in smoke if connected to a 5V Arduino? Or a 5V device that needs a workaround to be compatible with your 3.3V Raspberry Pi 4, Raspberry Pi Zero, or Arduino Due?
  • To get over this obstacle you need a device that can shift 3.3V up to 5V or 5V down to 3.3V. This is called logic level shifting. Level shifting is a dilemma so common we designed a simple PCB assembly to make interfacing devices a little easier: the Bi-Directional Logic Level Converter.
  • A bi-directional logic level converter is a small device that safely steps down 5V signals to 3.3V AND steps up 3.3V to 5V.
Compare

SOP8 TSSOP8 SSOP8 TO DIP8 Adapter-2Pcs

51.92
(0 Reviews)
Specifications: 
  1. Dimensions: 12 x 12 mm.
  2. Pitch Patch: 0.4 mm.
Compare

CJMCU-TRRS 3.5mm Jack AV Stereo Module

71.98
(0 Reviews)
Features :
  1. Mini design, portable and easy to use.
  2. It is the audio-style connectors that you see on some phones, MP3 players, and development boards.
  3. TRRS stands for “Tip, Ring, Ring, Sleeve,” which reflects the fact that, unlike a standard stereo connector, this actually has three conductors and a ground.
  4. Some devices use the extra conductor for a microphone (like hands-free headsets) or to carry a video signal (like in some MP3/MP4 players).

Back to Top
Product has been added to your cart