This AC 125V 5A Micro Limit Switch KW4-3Z3Shaft Straightener for 3D Printers can be used for the control of the position of moving parts of machines and plants in various mechanical mechanical applications. It is suitable for both the AC and DC control circuits.
In Stock
AC 125V 5A Micro Limit Switch KW4-3Z-3 Shaft Straightener for 3D Printers
Specifications:
- Dielectric strength: 1500VAC for 1 Minute
- Contact Resistance: 30mΩ Max
- Insulation Resistance: 100MΩ Min
- Voltage Rating: 125-250V AC
- Current Rating: 5A
₹84.96
CompareBestsellers
Compare
Limit Switch
₹64.90(0 Reviews)
Specifications:
- Switching capacity of 3A at 250VAC, 5A at 125VAC.
- Pin plunger, hinge, long hinge, simulated roller, hinge roller lever actuators available.
- Solder, quick connect, PCB terminals available.
- SPDT, SPST-NC, SPST-NO contact configuration.
- High stability and durability.
Compare
Microswitch KW10-Z1P Limit Switch 1A 125V AC – 2Pcs
₹55.46(0 Reviews)
Specifications:
- Max. Switching voltage: 125 V
- Max. switching frequency per minute: 60
- Max. switching current: 1 A
- Contact resistance: 100 mΩ
- Contacts: NO, NC, COM
Compare
Mini Endstop Limit Switch with 1M Cable
₹100.30(0 Reviews)
Specifications:
- Current Rating: 2A
- Voltage Rating: 125V AC
- Switch Dimensions: 6 x 13 x 8 (LxWxH) mm.
- Cable Length: 1M
- Weight: 6gm.
- Switch Type: Mechanical
Compare
Motor Encoder Light Blocking Sensor Module
₹100.30(0 Reviews)
Specifications:
- Using imported groove optical coupling sensor, width 5mm.
- It have the output state light, if output high level, the lights are off. if output low level ,it on.
- If it covered, it will output high level; otherwise it output low level.
- Good signal and waveform, with strong driving ability for more than 15mA.
- The working voltage of 3.3V to 5V
- Output: digital switch output (0 and 1)
- Equipped with a fixed bolt hole, easily install.
- Use the LM393 wide voltage comparer
Compare
Optical Endstop Light Control Limit Optical Switch
₹100.30(0 Reviews)
Specifications:
- Dimensions : 33 x 20 x 10 mm.
- Weight: 25 gm.
- Increased reliability
- Increased precision
Compare
3D Printer 5A Limit Switch Endstop with 1m Long Cable
₹149.86(0 Reviews)
Specifications:
- Limit Switch Voltage: 5A/ 125V and 3A/ 250V.
- Weight: 8 gm.
- Dimensions of a switch: 20 x 15 x 6 mm.
- Connecting cable Length: 1 meter.
Compare
AC 125V 5A Micro Limit Switch KW4-3Z-3 Shaft Straightener for 3D Printers
₹84.96(0 Reviews)
Specifications:
- Dielectric strength: 1500VAC for 1 Minute
- Contact Resistance: 30mΩ Max
- Insulation Resistance: 100MΩ Min
- Voltage Rating: 125-250V AC
- Current Rating: 5A
Reviews
There are no reviews yet.