Due to the COVID 19 epidemic, orders may be processed with a slight delay

Search

In Stock

7-Segment Display Module TM1637 Clock Display for Arduino

  • Display module driver IC : TM1637
  • Operating Voltage : 5V or 3.3V
  • Control Interface: A total of four pins (GND, VCC, DIO, CLK), GND to ground,
  • GND to ground,
  • VCC is the power supply,
  • DIO of data input and output pin,
  • CLK is the clock signal pin;
  • The module is a 12-foot clock with 4 points of positive digital (0.36 inches)

149.86

Compare
SKU:cds-d-led-7-sdm

The module is a 12-foot clock with 4 points of positive digital (0.36 inches) display module driver IC TM1637, only two signal lines can make SCM four 8-segment LED.

Module features are as follows:

Display of male red for the four digital tube Adjustable digital tube 8 gray Level control interface for 5V or 3.3V 4 M2 screws positioning holes for easy installation

Control Interface: A total of four pins (GND, VCC, DIO, CLK), GND to ground, VCC is the power supply, DIO of data input and output pin, CLK is the clock signal pin; The module is a 12-foot clock with 4 points of positive digital (0.36 inches) display module driver IC TM1637, only two signal lines can make SCM four 7-segment LED.

Reviews

There are no reviews yet.

Write a review

Your email address will not be published. Required fields are marked *

Bestsellers

Compare

CJMCU9813 Full Color LED RGB I2C Communication Drive Control Module

299.72
(0 Reviews)
Specifications :
  • IC input voltage: 5V-6.5V.
  • Built-in LDO: 4.5V regulator output.
  • Three-way drive: each drives current 0-45ma.
  • Built-in ring oscillator(1.2MHZ) to support ongoing FREE-RUN modulation output.
  • Maximum clock frequency: 15MHZ.
Compare

IR RX LED PT-333-3B (BLACK) (2 Pcs)

30.68
(0 Reviews)
Specifications:
  1. Make- Everlight
  2. ROHS compliant
  3. Spectral range (nm):700-1050
  4. Light Current IL ≥3mA
  5. Dark current ID< 0.1uA
  6. Breakdown Voltage> 30
  7. Maximum forward current 25mA
  8. Power dissipation Pd(mw): 100
  9. Package: Through-hole
  10. Diameter 5mm
  11. Maximum reverse voltage 5V
  12. Maximum Forward Voltage  1.2 V-1.3V
  13. Operating Temperature(Celsius)  -40°C- +100°C
Compare

16Bit WS2812B 5050 RGB LED Built-in Full Color Driving Lights Circular Development Board

349.28
(0 Reviews)
Specifications:
  1. Outer Diameter: 68 mm.
  2. Supply Voltage: DC 4-7V.
  3. LED driver chip: WS2812B
  4. Communication interface: single wire communication.
  5. Send data at speeds of 800Kbps.
  6. The color of the light was highly consistent
  7. Full-color module, Full-color soft lights a lamp strip.
Compare

LilyPad LED Blue Color

59.00
(0 Reviews)
Quick Overview: LilyPad is a wearable e-textile technology. Each LilyPad piece was creatively designed with large sew tabs to allow them to be sewn into the fabric. Various input, output, power and sensor boards are available. They’re even washable (with special care)!
Compare

DIP 3 Color LED Module

89.68
(0 Reviews)
Specifications:
  1. The use of plug-in full-color LED.
  2. RGB trichromatic limiting resistor to prevent burnout.
  3. Through the PWM adjusting, three primary colors can be mixed to obtain different colors.
  4. With a variety of single-chip interface.
  5. The working voltage: 5V.
  6. LED drive mode: common cathode driver
Compare

Super Bright Blue LED 5MM (5 Pieces)

23.60
(0 Reviews)
Specifications:
  • Forward voltage: DC3V-3.2V
  • Current: 20mA
  • Lens: 5mm diameter / transparent / round
  • Emitting color: blue (455-465nm)
  • Luminous intensity:7000-8000mcd
  • Viewing angle: 30 degree
  • Polarity: anode(+) (longer part), cathode(-) (shorter part)

Back to Top
Product has been added to your cart