50kg Half-bridge Experiments body Scale load cell sensor resistance strain sensor

When measuring, the correct force is applied to the outer side of the strain E-shaped beam portion of the sensor (i.e., a strain gauge affixed to the intermediate, adhesive coating with white beam arms) and the outer edges to form a shear force in the opposite direction, i.e., middle strain beam bending necessary changes can occur under stress, strain beam side by another force should not be a barrier.You can use multiple load sensors simultaneously to increase the capacity range, Parallel use to add additional capacity.

The sensor can be used with  the following three methods:

1. The use of a sensor with an external resistor full bridge measurement range for a sensor range: 50kg. Higher requirements for external resistor.
2. The use of only two full-bridge sensors measuring range for the range of the two sensors and: 50kgx2 = 100kg.
3. The use of four full-bridge sensors measuring range for the range of four sensors and: 50kgx4 = 200kg.

Features:

• This is a half-bridge load sensor, which is widely used in weight scales. When the half-bridge is being stretched, it sends the signal via the red signal wire.
• Internal 1000Ohm half-bridge strain gauge load cell, the range is 50kg, half-bridge structure.
• Alloy Steel wired weighing load cell, high accuracy, simple structure, simple installation.
• Widely used in hopper scales, platform scales, platform balance, belt scales, and other electronic weighing devices.