Due to the COVID 19 epidemic, orders may be processed with a slight delay

Search

In Stock

300 RPM Straight Dual Shaft Bo Motor

Specifications:

  1. Operating Voltage(VDC): 3~12
  2. Shaft Length (mm): 8.5
  3. Shaft Diameter (mm): 5.5 (Double D-type)
  4. No Load Current: 40-180mA.
  5. Rated Speed(After Reduction): 300 RPM
  6. Rated Torque: 0.35 Kgcm

82.98

Compare
SKU:cds-m-s-bm-300rpm-sd

The 300 RPM Dual Shaft BO Motor Plastic Gear Motor – BO series straight motor gives good torque and rpm at lower operating voltages, which is the biggest advantage of these motors. The motor is ideal for DIY enthusiasts. This motor set is inexpensive, small, easy to install, and ideally suited for use in a mobile robot car. They are commonly used in our 2WD platforms.

Reviews

There are no reviews yet.

Write a review

Your email address will not be published. Required fields are marked *

Bestsellers

Compare

300 RPM L Type BO Motor

82.98
(0 Reviews)
Specifications:
  1. Low density: lightweight, low inertia.
  2. Capability to absorb shock and vibration as a result of elastic compliance.
  3. Ability to operate with minimum or no lubrication, due to inherent lubricity.
  4. The relatively low coefficient of friction.
  5. Operating Voltage(VDC): 3~12
  6. Shaft Length (mm): 8.5
  7. Shaft Diameter (mm): 5.5 (Double D-type)
  8. No Load Current: 40-180mA.
  9. Rated Speed(After Reduction): 300 RPM
  10. Rated Torque: 0.35 Kgcm
Compare

300 RPM Straight Dual Shaft Bo Motor

82.98
(0 Reviews)
Specifications:
  1. Operating Voltage(VDC): 3~12
  2. Shaft Length (mm): 8.5
  3. Shaft Diameter (mm): 5.5 (Double D-type)
  4. No Load Current: 40-180mA.
  5. Rated Speed(After Reduction): 300 RPM
  6. Rated Torque: 0.35 Kgcm
Compare

300 RPM Straight Single Shaft BO Motor

82.98
(0 Reviews)
Specifications:
  1. Operating Voltage(VDC): 3~12
  2. Shaft Length (mm): 8.5
  3. Shaft Diameter (mm): 5.5 (Double D-type)
  4. No Load Current: 40-180mA.
  5. Rated Speed(After Reduction): 300 RPM
  6. Rated Torque: 0.35 Kg
Compare

60 RPM I Type BO Motor Single Side Shaft

82.98
(0 Reviews)
Specifications:
  1. I type BO motor
  2. Single Shaft
  3. Speed: 60 RPM
  4. Used in robotic applications
  5. Operating Voltage: 3V to 12V DC
  6. Colour: Yellow
  7. Shaft Length (mm): 8.5
  8. Shaft Diameter (mm): 5.5 (Double D-type)
  9. No Load Current: 40-180mA.
  10. Rated Torque: 1 Kg cm
Compare

60 RPM I-Type Dual Side Shaft Bo Motor

82.60
(0 Reviews)
Specifications:
  1. Low density: lightweight, low inertia.
  2. Capability to absorb shock and vibration as a result of elastic compliance.
  3. Ability to operate with minimum or no lubrication, due to inherent lubricity.
  4. The relatively low coefficient of friction.
  5. Operating Voltage(VDC): 3~12
  6. Shaft Length (mm): 8.5
  7. Shaft Diameter (mm): 5.5 (Double D-type)
  8. No Load Current: 40-180mA.
  9. Rated Speed(After Reduction): 60 RPM
  10. Rated Torque: 0.35 Kgcm
Compare

60 RPM L Type BO Motor

82.98
(0 Reviews)
Specifications:
  1. Operating Voltage 3V – 12V DC
  2. RPM Approximately 60 RPM
  3. Output Torque 3.5 kg.cm
  4. No-load current 40 – 80 mA
  5. Single Shaft Plastic Gear Motor – BO series L Shape
Compare

150 RPM BO Motor Single Side Shaft

82.98
(0 Reviews)
Specifications:
  1. Low density: lightweight, low inertia.
  2. Capability to absorb shock and vibration as a result of elastic compliance.
  3. Ability to operate with minimum or no lubrication, due to inherent lubricity.
  4. The relatively low coefficient of friction.
  5. Operating Voltage(VDC): 3~12
  6. Shaft Length (mm): 8.5
  7. Shaft Diameter (mm): 5.5 (Single D-type)
  8. No Load Current: 40-180mA.
  9. Rated Speed(After Reduction): 150 RPM
  10. Rated Torque: 0.35 Kgcm

Back to Top
Product has been added to your cart