Showing 37–48 of 317 results
Compare
AC 125V 5A Micro Limit Switch KW4-3Z-3 Shaft Straightener for 3D Printers
₹84.96(0 Reviews)
Specifications:
- Dielectric strength: 1500VAC for 1 Minute
- Contact Resistance: 30mΩ Max
- Insulation Resistance: 100MΩ Min
- Voltage Rating: 125-250V AC
- Current Rating: 5A
Compare
ACS712 20AMP DC Current Sensor
₹259.60(0 Reviews)
Specifications:
- Supply Voltage: 4.5V ~ 5.5V DC
- Measure Current Range: -20A ~ 20A
- Sensitivity: 100mV/A
- Low-noise analog signal path.
- Power-On Time: 35us
- 5 µs output rise time in response to step input current.
- Small footprint, low-profile SOIC8 package.
Compare
ACS712 30AMP DC Current Sensor
₹275.02(0 Reviews)
Specifications:
- Supply Voltage: 4.5V ~ 5.5V DC
- Measure Current Range: -30A ~ 30A
- Sensitivity: 100mV/A
- Low-noise analog signal path.
- Power-On Time: 35us
- 5 µs output rise time in response to step input current.
- Small footprint, low-profile SOIC8 package.
Compare
ACS712 5AMP DC Current Sensor
₹230.10(0 Reviews)
Overview:
- Supply Voltage: 4.5V ~ 5.5V DC
- Measure Current Range: -5A ~ 5A
- Sensitivity: 180mV/A ~190mV/A, Typical: 185mV/A
- Low-noise analog signal path.
- Device bandwidth is set via the new FILTER pin.
- 5 µs output rise time in response to step input current.
- Small footprint, low-profile SOIC8 package.
Compare
AD8232 Heart ECG Monitoring Sensor Module Kit for Arduino
₹1,489.16(0 Reviews)
Features
- Designed to extract, amplify, and filter small biopotential signals.
- Leads-Off Detection.
- Shutdown Pin.
- LED Indicator.
- Analog Output.
- 3.5 mm Jack for Biomedical Pad Connection.
Compare
Advanced Auto-Calibrating Line Sensor LSA08 Cytron
₹4,724.72(0 Reviews)
Features:
- 8 sensor pairs spaced 16mm.
- 12V input power
- On board Mode and Select button for instant configuration of LSA08
- 3 Different output mode (digital output port, UART output port, analog output port)
- LCD display unit showing 8 sensors analog value with bar chart and line position.
- Simple Auto-Calibration function to the line following surface.
- Junction Pulse (JPULSE) for detecting junction crossing and junction counting
- Power polarity protection
- Low current consumption (typically 26mA)
- Works on glossy or reflective surface
- Refresh rate up to 200Hz.
Compare
ADXL335 Accelerometer Analog XYZ axis
₹298.54(0 Reviews)
Specifications:
- 3-axis sensing
- Small, low-profile package
- 4 mm × 4 mm × 1.45 mm LFCSP
- Low power – 350 μA (typical)
- Single-supply operation- 1.8 V to 3.6 V
Compare
ADXL345 Triple Axis Accelerometer Board
₹119.18(0 Reviews)
Specifications:
- Supply Voltage: 3.3 V or 5V.
- Sensitivity: X: 28.6 LSB/g, Y: 31.2 LSB/g, Z: 34.5 LSB/g.
- Output data rate (ODR) : 800 Hz
- Sensing Range: ±2g, ±4g, ±8g, ±16g.
Compare
AIR PRESSURE SENSOR 0-40KPA - ARDUINO COMPATIBLE
₹354.00(0 Reviews)
Specifications:
- Pressure range :0-5 .8 psi (40kpa); 40kpa (differential pressure)
- Output: mV signal
- Electricity supply: 5VDC or constant current 1Ma
- Linear accuracy: 0.25% FS
- Measure the pressure range of 580 PSIG, 40KPaG
- Max pressure capacity of three times the measuring range
- Work power supply 5 VDC,
- Input impedance of 4 – 6 KΩ
- The output impedance of 4 – 6 KΩ
- Operating temperature -40 – 85 ° C -40 ° F – +185 ° F
Compare
AMT1001 Resistive Humidity and Temperature Sensor Module
₹258.42(0 Reviews)
Specifications:
- Supply voltage (Vin): DC5V ± 5%
- Operating temperature range: 0 to 60 ° C
- Humidity range: 95% RH (non condensing)
- Humidity range: 95% RH (non condensing)
Compare
Anti Static ESD Wrist Strap Elastic Band with Clip for Sensitive Electronics Repair Work Tool
₹99.12(0 Reviews)
Overview:
- The soft elastic band comfort.
- Inner conducting layer made of stainless shell filaments.
- Durable Polyurethane-Coated Coil Cords.
- Adjustable wrist strap with alligator clip tip.
- Rinsing Resisting.
- High-Quality Strain relief.
Compare
Auto-Calibrating Line Sensor LSS05
₹1,038.40(0 Reviews)
Specifications:
- 5V power, reserve polarity protected
- 5 digital outputs representing the logic of 5 IR sensor, represented with indicator each.
- Calibration button for easily calibrating the sensor
- Dimensions: 64x28x10 (LxWxH) mm.
- Weight: 8 gm.
