Showing 25–36 of 317 results
Compare
5-24V Buzzer Continues Beep- Big 27C
₹47.20(0 Reviews)
Specifications:
- Power Source: DC (5v-24v)
- Material: Plastic
Compare
50kg Half-bridge Experiments body Scale load cell sensor resistance strain sensor
₹100.30(0 Reviews)
Specifications:
- Capacity (Kg): 50.
- Repeatability (%FS): 0.03.
- Input Resistance (Ω): 1000.
- Output Sensitivity (mv/v): 1.0±0.1.
- Insulation Resistance (MΩ): ≥5000.
- Nonlinearity (%FS): 0.03.
Compare
5A 12V Overcurrent Protection AC Current Detection Sensor Module
₹448.40(0 Reviews)
Overview:
LC 5A Over-current protection Sensor module uses a current transformer to collect the AC signal to achieve the relay over-current signal output within 0-5A. Relay pull while over-current, relay released while not over-current
Compare
5A range of single-phase AC current sensor module
₹260.78(0 Reviews)
Specifications:
- Rated input current: 5A
- Rated output current: 5mA
- Change: 1000: 1
- The linear range: 0 ~ 10A (100 ohms)
- Linearity: 0.2%
Compare
5MP Infrared Night Vision Fish-Eye lens 170° FOV Surveillance Camera Raspberry PI
₹1,239.00(0 Reviews)
Specifications:
- Resolution: 2952 × 1944
- 170 degrees fish-eye lens
- Dimension: 8 x 6 x 3 cm
- Weight: 10 g
- Night vision Camera
- 170° Fish-eye lens
Compare
5MP Raspberry Pi 3 Model B Camera Module Rev 1.3 with Cable
₹348.10(0 Reviews)
Specifications:
- Fully Compatible with Both the Model A, Model B and Model B+ Raspberry Pi
- 5MP Omnivision 5647 Camera Module
- Still Picture Resolution: 2592 x 1944
- Video: Supports 1080p @ 30fps, 720p @ 60fps and 640x480p 60/90 Recording
- 15-pin MIPI Camera Serial Interface – Plugs Directly into the Raspberry Pi Board
- Size: 20 x 25 x 9mm
- Weight 3g
Compare
5MP Raspberry Pi Zero W Camera Module With HBV FFC Cable
₹689.12(0 Reviews)
Specifications:
- Resolution: 5 MP
- Interface Type: CSI(Camera Serial Interface)
- Dimensions: 25x23x8 (LxWxH) mm
- Supported Video Formats: 1080p @ 30fps, 720p @ 60fps and 640x480p 60/90 video
- Fully Compatible with Raspberry Pi Zero W.
- Directly plug into Raspberry Pi Board (besides HDMI port)
Compare
6 Pin Universal Gas Sensor Socket
₹93.22(0 Reviews)
Features:
- It is 6 pins plastic socket, to match with semiconductor sensor use.
- It could be soldered on gas alarm pcb board directly, then insert semiconductor sensor onto it.
- It is more convenient than solder sensor directly on the pcb.
Compare
6-12VDC Mini Microphone Pickup Aerial Audio Signal Collection For Camera FPV QAV250 mini Quadcopter
₹198.24(0 Reviews)
Specifications:
- Supply Voltage: 6-12VDC
- Frequency Range: 100-5500 Hz
- Output: 2.5Vpp/-25db
- Low noise
- High fidelity
- Wide working voltage range
- Low power consumption
- Long transmission distance
Compare
650nm 6mm 5V DC 5mW Mini Laser Dot Diode Module
₹65.50(0 Reviews)
Specifications:
- Output Power: 5mW
- Working Voltage: 5V DC
- Working temperature: -10 ℃~+40 ℃
- Housing material: Copper
- Working life: more than 2000 hours
- Spot mode: Dot Facula (continuous output)
- Laser wavelength: 650nm red-colored.
- Operating current: <40mA
- Power lead length: 120mm.
Compare
8 Way Capacitive Touch Sensor
₹188.80(0 Reviews)
Specifications:
- Power supply for 2.4 ~ 5.5V DC
- Typical high Voh = 0.8VCC
- Typical Vol = 0.3VCC
- Output Sink Current: 8mA
- Output pin pull-up current: 4mA
- Response time (Low Power mode): 220mS
- Response time: 60mS
Compare
A3144 Hall Effect Sensor Magnet Detector Switch for Arduino
₹61.36(0 Reviews)
Features :
- Digital Output Hall-effect sensor.
- Operating voltage: typically 5V.
- Output Current: 25mA.
- It can be used to detect both the poles of a magnet.
- The output voltage is equal to the operating voltage.
- Operating temperature: -40°C to 85°C.
- Turn on and Turn off time is 2 μsec each.
- Inbuilt reverse polarity protection.
- Suitable for Automotive and Industrial Applications.