Showing 241–252 of 317 results
Compare
RFID Reader EM18 Board with Serial TTL Interfacing 125 Khz
₹649.00(0 Reviews)
Specifications:
- Input Voltage: 5 V DC – 12V DC
- On Board Voltage Regulator
- Operating Frequency: 125 khz
- Read Distance: 8 to 10 cm
- Size: 32 mm (length), 32 mm (width), 8 mm (height)
- Serial
Compare
RFID Reader EM18 Board with Serial TTL Interfacing 125 Khz through a RS232 converter to PC
₹649.00(0 Reviews)
Specifications:
- Input Voltage: 5 V DC – 12V DC
- On Board Voltage Regulator
- Operating Frequency: 125 khz
- Read Distance: 8 to 10 cm
- Size: 32 mm (length), 32 mm (width), 8 mm (height)
- Serial
Compare
RFID Reader/Writer RC522 SPI S50 with RFID Card and Tag
₹130.98(0 Reviews)
Specifications:
- Operating Voltage: 2.5V to 3.3V
- Operating Current:13-26mA
- Idle Current:10-13mA
- Peak current: <30mA
- Sleep current: <80uA
- Operating Frequency: 13.56MH
- Communication: SPI, I2C protocol, UART
Compare
Robotics 801S Vibration / Shock Sensor sensitivity adjustable analog output
₹299.72(0 Reviews)
Overview:
- The wide detection range of vibration, no direction.
- Has a signal output instruction.
- When the output valid signal is high, the light goes out.
- The sensitivity is adjustable (fine-tuning).
- With mounting holes, firmware installation is flexible and convenient.
Compare
Rotary Encoder Module
₹100.30(0 Reviews)
Specifications:
- Model: KY-040.
- Type: Incremental Encoder.
- Cycles per revolution (CPR) : 20.
- Working voltage : 0 – 5V.
- Material : PCB + Brass.
- Weight: 10 gm.
Compare
Sandisk Micro SD/SDHC 16GB Class 10 Memory Card (Upto 98MB/s Speed)
₹329.22(0 Reviews)
Features:
- Memory Size: 16 Gigabyte
- Card Type: Micro SD
- Speed: up to 98MB/s
- Class: 10
- High-speed Card can be used for both Mobile phone and Raspberry Pi
- 5 years of manufacturing defect Warranty Given by Sandisk.
Compare
Sandisk Micro SDXC USH-I 64GB Class 10 Memory Card
₹826.00(0 Reviews)
Features:
- Memory Size: 64 Gigabyte
- Card Type: Micro SD
- Speed: up to 98MB/s
- Class: 10
- High-speed Card can be used for both Mobile phone and Raspberry Pi
Compare
SCT-013-015 Non-invasive AC Current Sensor Clamp Sensor 15A
₹499.14(0 Reviews)
- Frequency range:50Hz-1KHz.
- Input current (RMS): 15A.
- Work voltage:660V.
- Max current: 40A.
- Dielectric strength:3.5KV 50Hz 1min
- Work temperature:-25℃~+70℃.
- Storage temperature:-30℃~+90℃.
Compare
SCT-013-030 Non-invasive AC Current Sensor Clamp Sensor 30A
₹499.14(0 Reviews)
- Frequency: 50HZ-150KHZ
- Input Current : 0-30A
- Output Mode: 0-1V @ 30mA
- Output Plug 3.5mm
- Opening Size: 13 x 13mm/ 0.5″ x 0.5″(L*W)
- Dielectric Strength 6000V AC/1min
- Meet UL94-V0 flame retardant properties
Compare
SD Card Module
₹99.12(0 Reviews)
Specifications:
- Supports Micro SD up to 2GB
- Current: 0.2~200mA
- Working voltage: VCC 4.5~5.5V
- Onboard 3.3V voltage regulator circuit
- Interface electrical level: 3.3V / 5V
- Micro SDHC up to 32GB
Compare
SD Card Reading Writing Module for Arduino
₹97.94(0 Reviews)
Specifications:
- All SD SPI pins output, MOSI, SCK, MISO, and CS.
- Support 5V/3.3V input.
- This module can handle 2GB SD cards.
- Size:4.7 x 3.1 cm.
- LED indicator.
- SD Card Holder.
- Onboard 3.3V regulator (AMS1117-3.3) for +5v to 3.3V generation. 3.3V is also available as output.
Compare
SENSOR TSOP 1738 (PLASTIC)
₹37.76(0 Reviews)
Specifications:
- Supply Voltage: 5 V
- Power consumption: 0.4 to 1.0 mA
- Min. Ee irradiation: 0.35 mW/m2 typ.
- The angle of detection: 90
- Dimensions of the casing (mm): 12.5 x 10 x Thickness 5.8
- Temperature range: -25 C to +85 C