Showing 61–72 of 105 results
Compare
Prototyping Shield for Raspberrry PI
₹649.00(0 Reviews)
Specifications:
-
- A big prototyping area, half of which is ‘breadboard’ style and half of which is ‘perfboard’ style so you can wire up DIP chips, sensors, and the like.
- Along the edges of the proto area, all the GPIO/I2C/SPI and power pins are broken out to 0.1″ stips so you can easily connect to them.
- On the edges of the prototyping area, all of the breakout pins are also connected to labeled 3.5mm screw-terminal blocks. This makes it easy to semi-permanently wire in sensors, LEDs, etc.
- There’s also a 4-block terminal block broken out to 0.1″ pads for general non-GPIO wiring.
- A SOIC and a TSSOP surface mount chip breakout area, for those chips that dont come in DIP format.
- Comptiable EEPROM chip: AT24C08BN-SP25-T
- POWER LED indicator
- Space between holes is standard 2.54 mm.
- Extended IO Port with Terminal output can be connected directly to external module.
Compare
RASBERRY PI 3 B+ BCM2837B0 SoC, IoT, PoE Enabled
₹2,998.38(0 Reviews)
Specification
- Broadcom BCM2837B0, Cortex-A53 (ARMv8) 64-bit SoC @ 1.4GHz
- 1GB LPDDR2 SDRAM
- 2.4GHz and 5GHz IEEE 802.11.b/g/n/ac wireless LAN, Bluetooth 4.2, BLE
- Gigabit Ethernet over USB 2.0 (maximum throughput 300 Mbps)
- Extended 40-pin GPIO header
- Full-size HDMI
- 4 USB 2.0 ports
- CSI camera port for connecting a Raspberry Pi camera
- DSI display port for connecting a Raspberry Pi touchscreen display
- 4-pole stereo output and composite video port
- Micro SD port for loading your operating system and storing data
- 5V/2.5A DC power input
- Power-over-Ethernet (PoE) support (requires separate PoE HAT
Compare
Raspberry 3B+ Injection Molding Case Supporting Camera
₹199.42(0 Reviews)
Features:
- Compatible for All variants of the Raspberry Pi 3 Model B+
- Easy to assemble and highly durable material
- Locking screw holes and anti-slip rubber feet at the back.
- Uses: For Raspberry Pi surveillance camera shell
- The horizontal angles are 360 degrees and 90 degrees, showing a large view of the camera.
Compare
Raspberry Pi 3 – Model B Original with Onboard WiFi and Bluetooth
₹2,798.99(0 Reviews)
Specifications:
- RAM: 1GB
- Processor: Broadcom BCM2387 chipset 1.2GHz Quad-Core ARM Cortex-A53 (64Bit)
- 802.11 b/g/n Wireless LAN and Bluetooth 4.1 (Bluetooth Classic and LE)
- Storage : SD/MMC/SDIO
- Power: 5V / 700mA~3A via micro USB
Compare
Raspberry Pi 3 3B+ Frosted Case
₹148.68(0 Reviews)
Features:
- 2-piece frosted ABS case only
- All ports are accessible
- Slots to route GPIO and CSI ribbon cable
- Cut-out for micro SC card at the bottom panel
- Dimensions in mm (LxWxH): 91x66x30
- Weight (gm): 44
Compare
Raspberry Pi 3 A+
₹2,293.92(0 Reviews)
Features
The Raspberry Pi 3 Model A+ extends the Raspberry Pi 3 range into the A+ board format.
- Broadcom BCM2837B0, Cortex-A53 (ARMv8) 64-bit SoC @ 1.4GHz
- 512MB LPDDR2 SDRAM
- 2.4GHz and 5GHz IEEE 802.11.b/g/n/ac wireless LAN, Bluetooth 4.2/BLE
- Extended 40-pin GPIO header
- Full-size HDMI
- Single USB 2.0 ports
- CSI camera port for connecting a Raspberry Pi Camera Module
- DSI display port for connecting a Raspberry Pi Touch Display
- 4-pole stereo output and composite video port
- Micro SD port for loading your operating system and storing data
- 5V/2.5A DC power input
Compare
Raspberry Pi 3 GPIO Board Multi-functional Cascade Expansion Extension Board Module
₹690.30(0 Reviews)
Overview:
This module is used to extend the 40 GPIO pins of the Raspberry to another set of 2×20 pins and 8 pins in parallel accessible in the terminal blocks in which test leads are pushed. The electronic chart offers great reliability with the Raspberry and is very easy to connect thanks to its existing accessories
Compare
Raspberry Pi 3 Heat Sink set
₹159.30(0 Reviews)
Features:
- Reduces the risk of hardware failure due to overheating
- Low profile, will fit into most cases.
- Simple, Passive cooling. No need for noisy fans.
- Perfectly sized for the RPi’s CPU
- A set of 3 heatsinks
- Material:
- 1 x Aluminium
- 2 x Copper
- Colour: Red and Copper.
- Weight: 30g for a set of 3 Heat Sink.
- Self-adhesive thermal layer for easy application
- The thermal resistance of 27°C/W
Compare
Raspberry Pi 3B/2B/B+ GPIO Ruler V2
₹195.24(0 Reviews)
Specifications:
- It is a rule, and it is a Raspberry Pi reference board.
- It is an ideal quick reference for GPIO hacking on the Raspberry Pi
- Begin your Raspberry Pi tutorial from it.
- It can be used as both CM and Inches ruler.
- Color: Blue.
Compare
Raspberry Pi 4 Black Compact ABS Case
₹351.64(0 Reviews)
Specifications:
- Only 3-piece ABS case with access to all Ports on pi 4
- Compatible for All variants of the Raspberry pi 4 Model B
- Easy to assemble and highly durable material
- Slots to route GPIO and CSI ribbon cable
- Cut-out for micro SC card at the bottom panel
- locking screw holes and anti-slip rubber feet at the back.
Compare
Raspberry Pi 4 Model B 2GB
₹3,189.54(0 Reviews)
Specifications:
- Broadcom BCM2711, Quad core Cortex-A72 (ARM v8) 64-bit SoC @ 1.5GHz
- 1GB, 2GB or 4GB LPDDR4-2400 SDRAM (depending on model)
- 2.4 GHz and 5.0 GHz IEEE 802.11ac wireless, Bluetooth 5.0, BLE
- Gigabit Ethernet
- 2 USB 3.0 ports; 2 USB 2.0 ports.
- Raspberry Pi standard 40 pin GPIO header (fully backwards compatible with previous boards)
- 2 × micro-HDMI ports (up to 4kp60 supported)
- 2-lane MIPI DSI display port
- 2-lane MIPI CSI camera port
- 4-pole stereo audio and composite video port
- H.265 (4kp60 decode), H264 (1080p60 decode, 1080p30 encode)
- OpenGL ES 3.0 graphics
- Micro-SD card slot for loading operating system and data storage
- 5V DC via USB-C connector (minimum 3A*)
- 5V DC via GPIO header (minimum 3A*)
- Power over Ethernet (PoE) enabled (requires separate PoE HAT)
- Operating temperature: 0 – 50 degrees C ambient
Compare
Raspberry Pi 4 Model B 4GB
₹4,897.00(0 Reviews)
Specifications
- Broadcom BCM2711, Quad core Cortex-A72 (ARM v8) 64-bit SoC @ 1.5GHz
- 1GB, 2GB or 4GB LPDDR4-2400 SDRAM (depending on model)
- 2.4 GHz and 5.0 GHz IEEE 802.11ac wireless, Bluetooth 5.0, BLE
- Gigabit Ethernet
- 2 USB 3.0 ports; 2 USB 2.0 ports.
- Raspberry Pi standard 40 pin GPIO header (fully backwards compatible with previous boards)
- 2 × micro-HDMI ports (up to 4kp60 supported)
- 2-lane MIPI DSI display port
- 2-lane MIPI CSI camera port
- 4-pole stereo audio and composite video port
- H.265 (4kp60 decode), H264 (1080p60 decode, 1080p30 encode)
- OpenGL ES 3.0 graphics
- Micro-SD card slot for loading operating system and data storage
- 5V DC via USB-C connector (minimum 3A*)
- 5V DC via GPIO header (minimum 3A*)
- Power over Ethernet (PoE) enabled (requires separate PoE HAT)
- Operating temperature: 0 – 50 degrees C ambient