Showing 25–36 of 265 results
Compare
12V 5010 Cooling Fan for 3D Printer
₹99.12(0 Reviews)
Features:
- Perfectly fit on the extruder
- Noiseless Performance
- Very low Current consumption
- Easy to install and connect.
- Long Connecting Wire
Compare
12V Mini Air Pump DC Blower for Robotics ; DIY Hobby Projects
₹177.00(0 Reviews)
Specifications:
- Operating Voltage: 6V
- Current Consumption: approx.: 0.15 Amp
- Medium: Air
Compare
12V Solenoid Valve 0.5″
₹414.18(0 Reviews)
Specifications:
- Rated Operating Voltage : 12v DC
- Rated Current : 0.6A
- Operation Mode : Normally Closed
- Power Consumption : 8W
- Pressure : 0.02- 0.8Mpa
- Energized forms : Intermittent
- Inlet and outlet Dimeter : Hose barbs for 1/2″ (outer diameter) hose
- Dimensions (mm) LxWxH :
- Body: 84 x 57mm (L x H) Coil size: 34 x 23mm (W x H)
- Weight (gm) : 48
- Max fluid temperature : 100 deg C
Compare
150 RPM BO Motor Single Side Shaft
₹82.98(0 Reviews)
Specifications:
- Low density: lightweight, low inertia.
- Capability to absorb shock and vibration as a result of elastic compliance.
- Ability to operate with minimum or no lubrication, due to inherent lubricity.
- The relatively low coefficient of friction.
- Operating Voltage(VDC): 3~12
- Shaft Length (mm): 8.5
- Shaft Diameter (mm): 5.5 (Single D-type)
- No Load Current: 40-180mA.
- Rated Speed(After Reduction): 150 RPM
- Rated Torque: 0.35 Kgcm
Compare
150 RPM Bo Motor Straight Dual Shaft
₹70.80(0 Reviews)
Specifications:
- Low density: lightweight, low inertia.
- Capability to absorb shock and vibration as a result of elastic compliance.
- Ability to operate with minimum or no lubrication, due to inherent lubricity.
- The relatively low coefficient of friction.
- Operating Voltage(VDC): 3~12
- Shaft Length (mm): 8.5
- Shaft Diameter (mm): 5.5 (Double D-type)
- No Load Current: 40-180mA.
- Rated Speed(After Reduction): 150 RPM
- Rated Torque: 0.35 Kgcm
Compare
150 RPM Johnson A Grade Motor 30 mm Shaft Length
₹560.50(0 Reviews)
Specifications:
- Operating Voltage: 6-18 V
- Rated Voltage: 12 V
- Rated Torque: 4.7 kg-cm
- Stall Torque: 15.6 kg-cm
- Gearbox Dimensions: 22×37 (LxW) mm
Compare
150 RPM L Type Bo Motor
₹70.80(0 Reviews)
Specifications:
- Operating Voltage(VDC): 3~12
- Shaft Length (mm): 8.5
- Shaft Diameter (mm): 5.5 (Double D-type)
- No Load Current: 40-180mA.
- Rated Speed(After Reduction): 150 RPM
- Rated Torque: 0.8 Kgcm
Compare
150 RPM Rectangular Gearbox Motor
₹1,281.48(0 Reviews)
Specifications:
- Base Motor RPM: 6000
- Rated Voltage: 12 V
- Rated Torque: 11 kg-cm
- Stall Torque: 42.5 kg-cm
Compare
15L High Flow 555 Vacuum Pump, Air Pump, Oxygen Pump, Fish Tank Folding
₹859.04(0 Reviews)
- Operating voltage: 12 VDC
- Rated current: 800mA
- Inflation time: <6 seconds (from 0 to 300 mmHg in a 1000CC closed container)
- Minimum pressure: >400 mmHg (53.33KPa)
- Hermeticity: <5mmHg (from 1000mmHg in 1000CC container min), airtight only for inflation
- Flow rate: >15 L/Min
- Noise: <55dB (test at 30cm distance)
- Lifetime: 100,000 cycles tested
Compare
16-Channel 12-bit PWM/Servo Driver I2C interface PCA9685 for Arduino Raspberry Pi
₹350.46(0 Reviews)
Specifications:
- Adjustable frequency PWM up to about 1.6 KHz
- 12-bit resolution for each output – for servos, that means about 4us resolution at a 60Hz update rate
- Configurable push-pull or an open-drain output
- The output enable pin to quickly disable all the outputs
- Terminal block for power input
- Reverse polarity protection on the terminal block input
- Green power-good LED
Compare
2 Axis Pan Tilt Brackets For Camera/Sensors for Servo SG90S MG90S
₹123.90(0 Reviews)
Features :
- PV Nylon Head Two Axial plastic
- Two axial platform
- Anti-vibration
- lightweight
- Good design and shape
- Sophisticated products
- Provision to add standard servo motors (sold separately)
- Pan and tilt using a simple PPM interface using RC servos with position control.
- 180 Degree of freedom on both axis.
- Supported Motors: TOWERPRO SG90, TOWERPRO MG90S
Compare
2.2 Kg.cm 180 Deg MG90S Servo Motor Metal Gear
₹324.50(0 Reviews)
Specifications
- Weight : 13.4g
- Dimension : 22.8 × 12.2 × 28.5 mm
- Operating Speed (6.0V no load): 15sec / 60 deg
- Operating Speed (7.4V no load): 13sec / 60 deg
- Product Torque (4.8V): 1.8kg/cm 2.2kg/cm(6.0V)
- Reaction Rate: 0.10sec/60degree(4.8V) 0.08sec/60degree(6.0V)
- Operation Voltage : 4.8 – 6Volts
- Gear Type: All Metal Gears
- Stable and shock proof double ball bearing design
- Dead band width: 5µs
- Temperature range: 0-55 degrees