Showing 241–252 of 265 results
Compare
Servo Motor ESC Tester
₹106.20(0 Reviews)
Specifications:
- Operating Voltage: DC 4.8-6V
- Offer 3 modes to check servos or ESC
- The Manual Mode allows you to turn the knob to different speeds and check the reaction time
- The Neutral mode makes the servo go back to the neutral point
- The Automatic ’’Window Wiper’’ Mode makes the servo swing like a window wiper in the largest angle possible
- Connect to up to 3 servos simultaneously.
Compare
Servo Mount Holder Bracket For SG90/MG90-2pcs
₹68.44(0 Reviews)
Specifications:
- Material: Transparent Acrylic
- Weight: 5 gm (each)
- Length: 35 mm
- Width: 37 mm
- Thickness: 2.7 mm
Compare
Servo/PWM Driver Adafruit 16-Channel 12-bit I2C interface PCA9685
₹289.10(0 Reviews)
Specifications:
- 5V compliant, and still talks to a 3.3V microcontroller
- 6 “address select” pins for configuring up to 62 ICs on a single I2C bus
- PWM frequency adjustable up to approximately 1.6kHz
- 12-bit frequency resolution (equates to about 4µs resolution at 60Hz refresh rate)
- Configurable as push-pull or open-drain output
- Output enable pin available for outside-the-microcontroller “shut it down!” control.
Compare
Shock Absorber Vibration Damper For NEMA17
₹149.28(0 Reviews)
Specifications:
- Material: Rubber
- Size: 51×51 (LxW) mm
- Inner Diameter: 15 mm
- Thickness: 6 mm
- Useful in reducing shocks.
- This will help to reduce resonance.
Compare
Solenoid Valve 12-24V DC
₹177.00(0 Reviews)
Features:
- Solenoid Actuation
- Quick Response
- RO Solenoid Valve
Compare
Standard Servo-TowerPro SG-5010(180° Rotation)
₹298.54(0 Reviews)
Specifications:
- Model: SG5010
- Weight: 39 gm
- Operating voltage: 4.8V~ 6V
- Servo Plug: JR
- Stall torque @4.8V : 5.5kg-cm
- Stall torque @6.6V : 6.5kg-cm
Compare
TB6560 stepper motor driver
₹489.70(0 Reviews)
Specifications:
- Driver Chip: TB6560AHQ
- Operating Voltage: 10-35V
- Nominal Voltage: 24V
- With the large heat sink to ensure good heat dissipation
- 6N137 high-speed OptoCoupler, to ensure a high speed without step out.
Compare
TB6600 stepper motor Driver Controller 4.5A 8~50V TTL 16 Micro-Step CNC Single-Axis
₹649.00(0 Reviews)
Specifications:
- Supply Voltage: 8V – 50V DC (36V recommended).
- Output current: 0.3A – 4.5A (peak value of 5A).
- Micro Step: 1, 2, 8, 16.
- Maximum PWM frequency: 200kHz.
- Adjustments for the maximum current of the LED: 1A, 2.2A, 3.3A, 4.5A.
- Operating temperature: -10 to + 45 ° С.
Compare
TB6600 Stepper Motor Drivers 4A 9-42V Micro Step CNC 1 Axis
₹625.40(0 Reviews)
Features:
- DC 9-42V power supply, 12-24V power supply the best
- Control signal input voltage 3.3-24V
- Segmentation accuracy 1-32 subdivision optional
- Output peak current 4.0A
- Input signal high-speed optocoupler isolation
- Built-in temperature protection and over-current protection
- Automatic half-flow to reduce heat
