Bestsellers in Motor Drivers & Relays / Motor Drivers / Stepper Motor Drivers
Compare
Double BTS7960 43A H-Bridge High-Power Stepper Motor Driver Module
₹899.00(0 Reviews)
Specifications:
- Input voltage(V): 6 – 27.
- Maximum current(A): 43.
- Input level(V): 3.3 – 5.
- Duty cycle: 0 – 100%.
- Path resistance: 16 mΩ at 25°C.
- Low quiescent current: 7 µA at 25°C
Compare
DRV8825 Stepper Motor Driver with Aluminum Heat Sink
₹120.00(0 Reviews)
Specifications:
- Supply Voltage: 8.2 – 42 VDC.
- Current Capacity : 2.2A max(24V).
- Continuous current per phase: 1.5 A.
- Minimum Logic voltage: 2.5V.
- Maximum Logic Voltage: 5V.
- Microstep resolutions: full, 1/2, 1/4, 1/8, 1/16, and 1/32.
- Dimensions : 15 x 20 mm.
- Weight: 4 gm.
Compare
IC L293D
₹69.62(0 Reviews)
Features
- Supply Voltage Range 4.5V to 36V
- 600-mA Output current capability per driver
- Separate Input-logic supply
- It can drive small DC-geared motors, bipolar stepper motor.
- Pulsed Current 1.2-A Per Driver
- Thermal Shutdown
- Internal ESD Protection
- High-Noise-Immunity Inputs
Compare
L9110 L9110S DC Stepper Motor Driver Board HBridge
₹118.00(0 Reviews)
Specifications:
- Power supply voltage: DC2.5-12V
- Each channel has 800mA continuous current output
- Low saturation pressure drop
- TTL/CMOS output level compatible can be connected directly to the CPU
- Control and drive integrated into IC
- Have pin high-pressure protection function
Compare
A3967 Stepper Motor Driver For Arduino
₹199.00(0 Reviews)
Specifications:
- Power supply: 7V to 30V.
- The higher the voltage, the higher the torque at high speeds.
- Adjustable current control from 150mA/phase to 750mA/phase.
- Logic voltage: 5V or 3.3V.
- A3967 microstepping driver.
Compare
L9110S DC Stepper Motor Driver Board
₹99.12(0 Reviews)
Features:
- L9110S-chip motor drive
- Supply voltage: 2.5-12V
- The maximum operating current of 0.8A
- Drive two DC motors or a 4-wire 2-phase stepping motor.
- Ultra-small size, suitable for assembly
Compare
A4988 DRIVER STEPPER
₹148.68(0 Reviews)
Specifications:
- Supply Voltage : 8-35 VDC.
- Current : 1.0A (no heatsink ).
- Current : 2.0A (with heat-sinking).
- logic input : 3 – 5.5V .
Showing 1–12 of 17 results
Compare
A3967 Stepper Motor Driver For Arduino
₹199.00(0 Reviews)
Specifications:
- Power supply: 7V to 30V.
- The higher the voltage, the higher the torque at high speeds.
- Adjustable current control from 150mA/phase to 750mA/phase.
- Logic voltage: 5V or 3.3V.
- A3967 microstepping driver.
Compare
A4988 DRIVER STEPPER
₹148.68(0 Reviews)
Specifications:
- Supply Voltage : 8-35 VDC.
- Current : 1.0A (no heatsink ).
- Current : 2.0A (with heat-sinking).
- logic input : 3 – 5.5V .
Compare
Aluminium Heatsink for A4988 DRV8825 - 5 Pieces
₹59.00(0 Reviews)
Features:
- Material: Aluminum
- Color: white
- Teeth Number: 5 Teeth
- Dimensions: 9 x 9 x 5 (LxWxH) mm
- They have good thermal conductivity.
- Very lightweight.
Compare
CNC 4 Axis Controller DSP Controlled - TB6560 Stepper Motor
₹5,900.00(0 Reviews)
Features:
- High performance, cost-effective.
- Automatic idle-current reduction.
- Supply voltage up to 45V DC.
- Output current up to 5.0A.
- Suitable for 2-phase and 4-phase motors.
- High speed optoelectronic isolation signal input.
- Single-chip PWM bipolar sinusoidal chopper ensures low vibration and high efficiency.
- 1, 2, 4, 8, 16 adjustable microstep control, motors run more precisely and smoothly.
- Overload, overcurrent, overheat, overvoltage and undervoltage protection to avoid damaging your computer and devices.
- Single-chip PWM bipolar sinusoidal chopper ensures low vibration and high efficiency.
- With one 0 ~ 10V PWM Signal output port for speed adjustment and one Relay output port.
- 5 types of input control in manual control interface, to set Limit, Estop, Midpoint-Setting, Cutter-presetting/Tool-Setting etc..
Compare
DM542 Digital Stepper Motor Driver with micro stepping 20 to 50V 4.2A
₹2,920.50(0 Reviews)
Features:
- Good high-speed performance
- Supply voltage up to +50VDC
- Output current up to 4.2A
- Pulse frequency up to 300 KHz
- Automatic idle-current reduction
- 3-state current control technology
- Self-adjustment technology
- Pure-sinusoidal current control technology
Compare
DM556 Digital Stepper Motor Driver with micro stepping 20 to 50V 5.6A
₹3,894.00(0 Reviews)
Features:
- Extra-low motor noise offers excellent quietness
- Anti-Resonance, provides optimum torque and nulls mid-range instability
- Self-test and Auto-configuration technology, offers optimum responses with different motors
- Microstep resolutions programmable, from full-step to 102,400 steps/rev
- Supply voltage up to +50 VDC
- Output current programmable, from 0.5A to 5.6A
- Pulse input frequency up to 200 KHz
- Automatic idle-current reduction
- Supports PUL/DIR and CW/CCW modes
Compare
DMA860H Digital Stepper Motor Driver with micro stepping 24 to 80V 7.2A
₹6,667.00(0 Reviews)
Features:
- Leadshine original D860H | MA860H microstepping drive.
- Input voltage :Up to +80VAC or +110VDC.
- Output current Up to 7.2A.
- Pulse input frequency up to 300 KHz.
- Automatic idle-current reduction.
- Over-voltage, over-current protection.
- Suitable for 2-phase and 4-phase motors.
- Support PUL/DIR and CW/CCW modes.
- Operating Temperature : 70 C.
Compare
Double BTS7960 43A H-Bridge High-Power Stepper Motor Driver Module
₹899.00(0 Reviews)
Specifications:
- Input voltage(V): 6 – 27.
- Maximum current(A): 43.
- Input level(V): 3.3 – 5.
- Duty cycle: 0 – 100%.
- Path resistance: 16 mΩ at 25°C.
- Low quiescent current: 7 µA at 25°C
Compare
DRV8825 Stepper Motor Driver with Aluminum Heat Sink
₹120.00(0 Reviews)
Specifications:
- Supply Voltage: 8.2 – 42 VDC.
- Current Capacity : 2.2A max(24V).
- Continuous current per phase: 1.5 A.
- Minimum Logic voltage: 2.5V.
- Maximum Logic Voltage: 5V.
- Microstep resolutions: full, 1/2, 1/4, 1/8, 1/16, and 1/32.
- Dimensions : 15 x 20 mm.
- Weight: 4 gm.
Compare
IC L293D
₹69.62(0 Reviews)
Features
- Supply Voltage Range 4.5V to 36V
- 600-mA Output current capability per driver
- Separate Input-logic supply
- It can drive small DC-geared motors, bipolar stepper motor.
- Pulsed Current 1.2-A Per Driver
- Thermal Shutdown
- Internal ESD Protection
- High-Noise-Immunity Inputs
Compare
L9110 L9110S DC Stepper Motor Driver Board HBridge
₹118.00(0 Reviews)
Specifications:
- Power supply voltage: DC2.5-12V
- Each channel has 800mA continuous current output
- Low saturation pressure drop
- TTL/CMOS output level compatible can be connected directly to the CPU
- Control and drive integrated into IC
- Have pin high-pressure protection function
Compare
L9110S DC Stepper Motor Driver Board
₹99.12(0 Reviews)
Features:
- L9110S-chip motor drive
- Supply voltage: 2.5-12V
- The maximum operating current of 0.8A
- Drive two DC motors or a 4-wire 2-phase stepping motor.
- Ultra-small size, suitable for assembly
