Bestsellers in Programmers / Interface Modules
Compare
MCP2515 CAN Module TJA1050 Receiver SPI 51 Single Chip Program Routine Arduino
₹228.92(0 Reviews)
Features :
Input Supply voltage: 5V
Input Supply Current: 5 mA
Communication Rate: 1 Mbps
Support CAN V2.0B technical standard, communication rate 1Mb / S.
0 to 8 bytes long data field.
Use High-speed CAN transceiver TJA1050
SPI control for expanding Multi CAN bus interface
Use serial port could view the communication data
With the independent key, LED indicator, Power indicator
With power pin
Positioning screw hole center spacing 23 mm x 38 mm
The working current: typical 5mA, standby current 1 microamp. Except for the power indicator.
Compare
ST Link V2 Programmer For STM8 and STM32
₹297.36(0 Reviews)
QUICK OVERVIEW:
- PCB installed inside of aluminum alloy U disk shell, portable, safe and reliable!
- Interface definition directly marked on the shell, clear, convenient and practical!
- 5V, 3.3V offers at the same time, allowing you to program your target board with both 5V and 3.3V
- Shell characters using laser engraving, never fade off! Permanent clarity!
- 500MA internal resettable fuse, complete protection of your expensive computer motherboard!
- SWIM cable for connection to the application via a pin header or a 2.54 mm pitch connector
- SWIM programming speed rate: 9.7 Kbytes/s in low speed and 12.8 Kbytes/s in high speed
Compare
DVI TO HDMI Converter
₹188.80(0 Reviews)
Features:
Support 1080P, 3D for PS3,PS4,TV Box,Blu-ray,Projector,HDTV
Support connecting your HDMI-equipped source devices such as your Laptop/ Desktop, Blu-Ray, Xbox 360, PS3, Apple TV, DVD, and Set Top Box to your DVI-enabled HDTV, Displays or Projectors with your existing HDMI cable(not included)
Support connecting DVI source devices, like Laptop/ Desktop to AV receivers, HDTV and Displays with HDMI interface at high definition
Fully compatible with all HDTV formats. Supports resolution up to 1080p
Gold-plated connectors that resist corrosion while offering optimum signal transfer
High Speed HDMI Female to DVI 24+1 DVI-D Male Adapter Gold Plated Support 1080P for HDTV, Plasma, DVD and Projector
Compare
USB To TTL CP2102 Module / USB to Serial (6Pin)
₹149.86(0 Reviews)
Features:
- Included USB transceiver, without external circuit device
- With 3.3V and 5V dual power output
- With three LEDs: power indicator, data reception indicator, the data transmission indicator, working status
- Meets the USB2.0 specification requirements
- With self-recovery fuse. In the event of the accidental short circuit, it can effectively protect your computer USB port and Downloader
- Asynchronous serial data bus compatible with all handshake and modulation controller interface signals
- The supported data format is 8 data bits, 1 stop bit and parity bits
Compare
New ESC USB Linker Programmer For Simonk BLHeli Firmware SN/BL/16A/20A/30A/40A
₹528.64(0 Reviews)
Features:
Direct plug design, works with most USB port and USB extension cable
Low power consumption design
Onboard 2?3 Pin AVR ISP port
3pin servo connector can be used as servo or C2 connection
Supports SIMONK and BLHELI ESC, KKflashtool compatible
KKflashtool and RapidFlash compatible
Silabs CP2102 Driver chip! (Win, Mac, Linux)
Software upgradeable (via Arduino or BLHELISUIT)
Pre-load as BLHELISUIT 4w-if 14.1 firmware
Compare
ST-LINK/V2 in-circuit debugger/programmer for STM8 and STM32
₹831.90(0 Reviews)
Features:
- 5V power supplied by a USB connector
- USB 2.0 full speed compatible interface
- USB standard A to mini B cable
- 1.65V to 5.5V application voltage supported on SWIM interface
- SWIM low speed and high-speed modes supported
Compare
ENC28J60 Ethernet LAN Network SPI Module (10 pin) 11/46
₹342.20(0 Reviews)
Features:
3.3 V power supply pin.
SPI Interface with Clock Speeds Up to 20 MHz
The board 25MHZ crystal
Fully Compatible with 10/100/1000Base-T Networks
Integrated MAC and 10Base-T PHY
Supports One 10Base-T Port with Automatic Polarity Detection and Correction
Supports Full and Half-Duplex modes
Programmable Automatic Retransmit on Collision
SPI Interface with Clock Speeds Up to 20 MHz
For Arduino, SPI, AVR, PIC, LPC, STM32.
Showing 1–12 of 43 results
Compare
ADS1115 16 Bit I2C ADC Analog to Digital Converter Module
₹374.00(0 Reviews)
Features:
- Single-shot mode: automatically turns off
- Low current consumption: Continuous mode 150 μA
- Wide supply voltage range: 2.0V to 5.5V
- Interfacing is done via I2C
- Programmable data rate: 8SPS to 860SPS
- Low drift internal voltage reference
- Internal Oscillator
- Internal PGA up to 860 samples per second (SPS)
- Four single-ended or two differential inputs (ADS1115)
- Operating temperature : -40 ° C to + 140 ° C
- Programmable comparator
Compare
BAFO Technologies USB to Serial DB9 Adapter with Cable
₹354.00(0 Reviews)
Specifications:
Brand: BAFO
Model : BF-810
Type: USB to DB9 (RS-232)
USB to DB9 adapter converter cable
USB full-speed (12Mbps)
True bidirectional
Compatible with Windows 98SE/ME/2000/XP/Vista/7, MAC OS 8.6 through 10.x
Compare
BAFO Technologies USB to Serial DB9 Adapter with Cable (ORIGINAL)
₹885.00(0 Reviews)
Specifications:
Brand: BAFO
Model: BF-810
Type: USB to DB9 (RS-232)
USB to DB9 adapter converter cable
USB full-speed (12Mbps)
True bidirectional
Compatible with Windows 2000/XP/Vista/7/8/10 (32/64-bits), MAC OS 8.6 through 10.x
Compare
CH340G USB To TTL(Serial) Converter For Arduino Nano Raspberry Pi
₹97.94(0 Reviews)
Features:
TTL interface output, easy to connect to your MCU.
Dual 3.3V and 5V Power output, work with 3.3v and 5 V target device.
The mini-module is designed specifically for STC download and ARDUINO PRO supports all series of STC
Microcomputer with cold start reset button
Supports WIN7/VISTA/MAC/LINUX(32 bit /64-bit system)
Built-in USB to TTL Transfer chip.
Designed to be used for USB to TTL electronic projects.
Compare
CH341A 24 25 Series EEPROM Flash BIOS USB Programmer with Software and Driver
₹285.56(0 Reviews)
Features:
Support 24 EEPROM and 25 SPI flash 8pin or 16pin chip
With 24/25 status indicator lamp
Support USB to TTL conversion support 24EEPROM and 25 SPI flash 8pin/ 16pin chip
Recognize 25 series chip automatically
Supports download STC series procedure of single chip
SPI pin to support expanding the utility
STC microcontroller supports a full range of program download
Support expanding the utility by SPI pin
With SOP8 SOP16 to DIP8 converter board
Supports Windows XP, Vista, Win7 and Win8 (32/64bit) system
Provide 5V-3.3V power supply output
Compare
DVI TO HDMI Converter
₹188.80(0 Reviews)
Features:
Support 1080P, 3D for PS3,PS4,TV Box,Blu-ray,Projector,HDTV
Support connecting your HDMI-equipped source devices such as your Laptop/ Desktop, Blu-Ray, Xbox 360, PS3, Apple TV, DVD, and Set Top Box to your DVI-enabled HDTV, Displays or Projectors with your existing HDMI cable(not included)
Support connecting DVI source devices, like Laptop/ Desktop to AV receivers, HDTV and Displays with HDMI interface at high definition
Fully compatible with all HDTV formats. Supports resolution up to 1080p
Gold-plated connectors that resist corrosion while offering optimum signal transfer
High Speed HDMI Female to DVI 24+1 DVI-D Male Adapter Gold Plated Support 1080P for HDTV, Plasma, DVD and Projector
Compare
ENC28J60 Ethernet LAN Network SPI Module (10 pin) 11/46
₹342.20(0 Reviews)
Features:
3.3 V power supply pin.
SPI Interface with Clock Speeds Up to 20 MHz
The board 25MHZ crystal
Fully Compatible with 10/100/1000Base-T Networks
Integrated MAC and 10Base-T PHY
Supports One 10Base-T Port with Automatic Polarity Detection and Correction
Supports Full and Half-Duplex modes
Programmable Automatic Retransmit on Collision
SPI Interface with Clock Speeds Up to 20 MHz
For Arduino, SPI, AVR, PIC, LPC, STM32.
Compare
ENC28J60 Ethernet Module(12 Pin Package: SSOP)
₹250.16(0 Reviews)
Features :
Fully Compatible with 10/100/1000Base-T Networks
Integrated MAC and 10Base-T PHY
Supports One 10Base-T Port with Automatic Polarity Detection and Correction
Supports Full and Half-Duplex modes
Automatic Programmable Retransmit on Collision
Programmable Padding and CRC Generation
Automatic Rejection of Erroneous Packets
SPI Interface with Clock Speeds Up to 20 MHz
Chipboard ENC28J60/SS.
The board 25MHZ crystal.
The network interface board HR911105A.
3.3 V power supply pin.
Stable performance.
For Arduino, SPI, AVR, PIC, LPC, STM32.
Compare
ENC28J60 LAN Ethernet Network Board Module (10 PIN) 11/50
₹352.82(0 Reviews)
Features:-
ENC28J60 Ethernet chips, SOP28 package
SPI Interface
1?10 connector can be easily mounted with the MCU
Built-in isolation transformer RJ45 connectors HR911105A
Power LED
Single Supply: +3.3 V
25Mhz Crystal
PCB size: 48?18 mm
Compare
HL-340 USB serial port (COM) USB to RS232 USB Nine Serial Line Support Windows 7-64
₹198.24(0 Reviews)
Features :
Single crystal 12M Tablet 340 USB port to serial port communication.
USB1.1/2.0 compliant solution.
Built-in 128 byte TX/512 byte RX buffer.
Supports the auto-Handshake Protocol.
Support Win95/98/98se/ME/2000/XP/win7 32bit 64bit/Vista/supports full-speed USB data transfer protocol.
Design of electromagnetic interference.
Data Exchange application.
Compare
I2C ADS1115 16 Bit ADC 4 Channel Module With Programmable Gain Amplifier For RPi
₹297.36(0 Reviews)
Feature:
Wide supply range: 2.0V to 5.5V
Low current consumption: Continuous Mode: Only 150uA Single-Shot Mode: Auto Shut-Down
Programmable data rate: 8SPS to 860SPS
Internal Low-drift voltage reference
Internal oscillator
Internal PGA
I2C interface: Pin-Selectable Addresses
Four Single-ended or two differential inputs
Programmable comparator
This board/chip uses I2C 7-bit addresses between 0x48-0x4B, selectable with jumpers
Compare
I2C IIC Module for 1602 2004 LCD
₹76.70(0 Reviews)
Specifications:
5V power supply.
Serial I2C control of LCD display using PCF8574.
Backlight can be enabled or disabled via a jumper on the board.
Contrast control via a potentiometer.
Can have 8 modules on a single I2C bus (change address via solder jumpers) address, allowing.
Size: 41.6 x 19.2 mm.
