PIC(6)

Features:

• No external power needed
• Power Indicator LED on board
• Fit perfectly with UIC00A and UIC00B
• Support 18-pin, 28-pin and 40-pin 8-bit PIC micro-controller.
• Selector to program 18-pin or 28-pin&40-pin PIC
• Come with 40-pin ZIF socket for ease of plug and unplug of PIC

Features: PIC18F4550 – Simplified Features CPU 8-bit Total Number of Pins 40 Operating Voltage +4.0 to +5.5 V (+5.5V being absolute maximum) Number of  programmable I/O pins 35 Communication Interface USB Serial Interface (23,24 PINS) [Can be used for programming this controller] Master/Slave SPI Serial Interface(7,26,33, 34 PINS) [Can be used for programming this controller] Programmable Serial UART(25,26 PINS) [Can be used for programming this controller] Two-wire Serial Interface(33, 34 PINS)[Can be used to connect peripheral devices like sensors and LCDs] ADC Module 13channels, 10-bit resolution ADC Timer Module One 8-bit counter, Three 16-bit counter Analog Comparators 2 PWM channels 4 External Oscillator Up to 48MHz Internal Oscillator 32KHz-8MHz  Calibrated Internal Oscillator Program Memory Type Flash Program Memory 32Kbytes[10000 write/erase cycles] CPU Speed 12 MIPS RAM Bytes 2KBytes EEPROM 256Bytes Watchdog Timer Programmable Watchdog Timer with Separate On-chip Oscillator Power Save Modes Available Operating Temperature -40°C to +85°C(+85 being absolute maximum, -40 being absolute minimum)  

FEATURES : 1. PIC Development Board for Microchip any 40 PIN PIC Series like. 16FXXX, 18FXXX (EX. 16F877A – 40 PIN). 2. ICSP Socket for Programming through PICKIT2 or PICKIT3. 3. On board Regulated 5v ,12v Supply. 4. Easy to test with Burg Connectors wires. 5. An RS232 Serial Port. 6. 7 Segment Multiplexed Display. 7. DC Power Supply Connector(12v Ac or Dc). 8. READY INTERFACE For LCD display 2linex16Character. 9. 24Cxx (I2C) (EEPROM). 10. RTC (DS1307). 11. 4 LED array. 12. Matrix Key Pad. 13. 4 Interrupt Switches. 14. ADC Interface Support. 15. ULN2008 Support For Interfacing Stepper Motors. Package Content : PIC Development Board for Microchip any 40 PIN PIC Series like. 16FXXX, 18FXXX (EX. 16F877A – 40 PIN).

Specification :

• USB (Full speed 12 Mbits / s interface to host PC)
• Real-time execution
• MPLAB IDE compatible (free download from Microchip)
• built-in over-voltage / short circuit monitor
• Firmware upgradeable from PC / web download
• totally enclosed
• Diagnostic LEDs (power, busy, error)
• read/write program and data memory from a microcontroller
• erase program memory with Verification
• Freeze peripherals at a breakpoint
• program up to 512K byte flash with the Programmer to Go
• ICSP cable included

Specifications:

• Type: Debugger/Programmer
• Tool/Board Application: Debugging/Programming
• MCU Supported Families: Flash-based PIC MCUs
• Core Architecture: PIC, dsPIC
• IC Product Type: In-Circuit Debugger