Due to the COVID 19 epidemic, orders may be processed with a slight delay

Search

Showing 85–96 of 100 results

Sort by
Compare

USB Blaster ALTERA CPLD/FPGA Programmer

696.20
(0 Reviews)
Features:
  1. Operating Voltage: 1.5~5V JTAG IO Voltage.
  2. System configuration: Windows XP, Windows Vista, Windows7, USB interface.
  3. Stably support SignalTap II embedded logic analyzer function, no mistake while crawling data.
  4. Fully support all Altera products such as CPLD: MAX3000, MAX7000, MAX9000 and MAXII.
  5. FPGA: Stratix, StratixII, StratxIII, Cyclone, CycloneII, CycloneIII, ACEX1K, APEX20K and FLEX10K etc.
  6. Active serial configuration device: EPCS1, EPCS4, EPCS16, EPCS64 etc.
  7. Enhanced configuration devices: EPC1, EPC4.
  8. Supports 3 download mode: AS, PS and JTAG.
696.20
Compare

USB Logic Analyze 24M 8CH, MCU ARM FPGA DSP Debug Tool

647.82
(0 Reviews)
Specifications:
  1. Logical light indication: a small light indicate CHO electrical level.
  2. Input feature: 5PF,100K Ohm.
  3. USB power supply; USB logic analyzer for monitoring, analyzing and debugging digital circuits
  4. 8-Channels USB logic analyzer with a 24Mhz sampling frequency
  5. Can analyze UART, IIC, and SPI, etc automatically
  6. Great for MCU, ARM system and FPGA development
  7. Voltage: 0-5.5V
  8. Threshold Voltage: 1.5V
647.82
Compare

USB RS232 To TTL

250.16
(0 Reviews)
Features :
  1. Built-in TTL COM Chip.
  2. Standard USB type and TTL 4 pin connector
  3. Simple and Easy way to give USB support to your designs
  4. Available for Linux, Mac, WinCE, and Windows (XP, 7), Win 8
250.16
Compare

USB To RS232 Coverter

295.00
(0 Reviews)
Specifications:
  1. CP2102 Based – Better and Faster than Cheap PL2303 based boards
  2. USB specification 2.0 compliant with full-speed 12Mbps.
  3. Supports all Windows (Above Win98), Mac OS (Above 9) & Linux (Above 2.x.x)
  4. Baud rates: 300 bps to 1 Mbps.
  5. Byte receives buffer: 640 byte transmit buffer.
  6. Create a virtual COM port and connect your old devices that use serial port communication
  7. Compatible with both 3.3V & 5V levels
  8. LED indication (ON only when the port is opened and being used, otherwise OFF)
  9. Temperature Range: -40 to +85.
295.00
Compare

USB To RS232 Coverter

295.00
(0 Reviews)
Specifications:
  1. CP2102 Based – Better and Faster than Cheap PL2303 based boards
  2. USB specification 2.0 compliant with full-speed 12Mbps.
  3. Supports all Windows (Above Win98), Mac OS (Above 9) & Linux (Above 2.x.x)
  4. Baud rates: 300 bps to 1 Mbps.
  5. Byte receives buffer: 640 byte transmit buffer.
  6. Create a virtual COM port and connect your old devices that use serial port communication
  7. Compatible with both 3.3V & 5V levels
  8. LED indication (ON only when the port is opened and being used, otherwise OFF)
  9. Temperature Range: -40 to +85.
295.00
Compare

USB to RS485 Converter Adapter Support WIN7 XP Vista Linux Mac OS

141.60
(0 Reviews)
Overview:
  • USB to RS485 Converter Adapter
  • USB connector: to your PC
  • RS485 connector: to your RS485 device
  • Fully compliant USB 2.0 standard, backward compatible with USB1.1
  • Support System: Windows XP, Vista, Windows 7, Linux, MacOS, and WinCE5.0 drive
  • Supports Plug, Play and hot-swap ( USB side)
  • Better than using CH341D chip or similar chip to support the laptop USB port
  • Communication distance up to 1.2KM, with the anti-jamming performance of the industrial site
  • No need external power, powered by USB port
141.60
Compare

USB to RS485 TTL Serial Converter Adapter FT232

348.10
(0 Reviews)
Features :
  1. Load capacity: support multipoint, each converter allows RS485 interface device to connect 32
  2. Interface Protection: TVS tube protection, USB self-recovery protection
  3. Support Windows98/ME/2000/XP/WIN7/Vista, Linux, Mac
  4. Self-powered from USB.
  5. It can be up to 32 devices on the bus.
  6. Baud rate: 300 – 9216000bps, automatically detecting the serial signal data rate
348.10
Compare

USB to TTL Converter Serial Cable - PL2303 Based - 4 Wire

177.00
(0 Reviews)
  • RED Wire – Power 5V, 500mA
  • BLACK Wire – Ground
  • WHITE Wire – RX
  • GREEN Wire – TX
177.00
Compare

USB To TTL CP2102 Module (5 Pin)

149.86
(0 Reviews)
Features:
  • With 3.3V and 5V dual power output.
  • With reset signal output, etc. Directly to the FOR Arduino board Promini download!
  • With three LEDs: power indicator, data reception indicator, the data transmission indicator, working status.
  • With self-recovery fuse. In the event of accidental short circuit, it can effectively protect your computer USB port and Downloader.
  • Supported operating systems: Windows 98/Me/2000/XP/7,OS-9/OS/X-Windows CE/Linux 2.40 or later.
149.86
Compare

USB To TTL CP2102 Module / USB to Serial (6Pin)

149.86
(0 Reviews)
Features:
  1. Included USB transceiver, without external circuit device
  2. With 3.3V and 5V dual power output
  3. With three LEDs: power indicator, data reception indicator, the data transmission indicator, working status
  4. Meets the USB2.0 specification requirements
  5. With self-recovery fuse. In the event of the accidental short circuit, it can effectively protect your computer USB port and Downloader
  6. Asynchronous serial data bus compatible with all handshake and modulation controller interface signals
  7. The supported data format is 8 data bits, 1 stop bit and parity bits
149.86
Compare

USB To UART TTL 5V 3.3V FT232RL FTDI Download Cable To Serial Adapter Module

219.48
(0 Reviews)
Features :
  1. Standard interface layout, compatible with a variety of Arduinos such as the Pro Mini
  2. Original FTDI FT232 chip, stable performance
  3. USB power has current protection, using 500MA self-restore fuse
  4. RXD/TXD transceiver communication indicator
  5. With power, sending, receiving indicator, working status LED indicators
  6. With 3.3V and 5V TTL Level supply options
  7. USB to serial TTL module, download STC SCM
  8. Mini USB Port Connection
  9. Support 3.3V, 5V
219.48
Compare

USB to UART/ESP8266 Adapter Programmer for ESP-01 WiFi Modules with CH340G Chip

153.40
(0 Reviews)
Features:
  1. Working voltage: 4.5V – 5.5V (Onboard 3.3v LDO Regulator)
  2. Working current: 300mA (LDO regulator can supply)
  3. Driver Chip: CH340G
  4. Supports all basic windows versions.
  5. The adapter plate integrated 1000μF solid capacitors to ensure the current supply
  6. The power supply will not be a problem to make WIFI module crashes unresponsive.
  7. Using 3225 SMD crystal oscillator, improve the stability of serial work, on a beautiful and tall.
153.40

Back to Top
Product has been added to your cart