Showing 37–48 of 100 results
Compare
ICSP Universal Socket
₹365.80(0 Reviews)
Overview:
Cytron has created this UIC-A so that users can use any programmer regardless of the development board. For example, a development board that uses PICkit2?s socket standard, which is 6-way header pins can be programmed with UIC000B by using the UIC-A!
Compare
ICSP Universal Socket
₹365.80(0 Reviews)
Overview:
Cytron has created this UIC-A so that users can use any programmer regardless of the development board. For example, a development board that uses PICkit2’s socket standard, which is 6-way header pins can be programmed with UIC000B by using the UIC-A!
Compare
Industrial RS232/RS485 to Ethernet Converter Waveshare
₹3,236.74(0 Reviews)
Features:
Processor: Cortex-M4 (up to 120MHz frequency)
Ethernet: RJ45 (10/100Mbps self-negotiation)
Protocols:IP, TCP, UDP, ARP, ICMP, DHCP, DNS, HTTPD Client
Working Modes:TCP Server, TCP Client, UDP Server, UDP Client, HTTPD Client
Interface Protection:Reverse-proof, ESD protection, anti-surge
Storage temperature: -40~105C
Power supply: 5.0~36.0V (5V recommended)
Operating current: 86.5mA (@5V)
Power consumption: <1W
Dimensions: 82.8mm ? 85.7mm ? 25mm
Operating temperature: -40~85C
Compare
Logic Level Converter 5V TO 3.3V / 3.3V to 5V
₹63.72(0 Reviews)
Overview:
- Do you have a 3.3V I2C or SPI sensor that might go up in smoke if connected to a 5V Arduino? Or a 5V device that needs a workaround to be compatible with your 3.3V Raspberry Pi 4, Raspberry Pi Zero, or Arduino Due?
- To get over this obstacle you need a device that can shift 3.3V up to 5V or 5V down to 3.3V. This is called logic level shifting. Level shifting is a dilemma so common we designed a simple PCB assembly to make interfacing devices a little easier: the Bi-Directional Logic Level Converter.
- A bi-directional logic level converter is a small device that safely steps down 5V signals to 3.3V AND steps up 3.3V to 5V.
Compare
MACH3 Interface Board CNC 5 Axis with Optocoupler for Stepper Motor Driver and USB cable
₹689.12(0 Reviews)
Specifications:
- Input Power: Through PC USB port or 12-24V power supply
- Compatible Stepper Motor Driver: Max 5, 2-phase Microstep controllers
- Driver type: Pulse and Direction signal control
- Weight (gm): 78
- Dimensions (mm) LxWxH: 90 x 70 x 20
- Cable Length: 1.4 meter
Compare
MAX485 TTL To RS485
₹88.50(0 Reviews)
Features :
Operating voltage: 5V
On-board MAX485 chip, A low power consumption for the RS-485 communication, slew-rate limited transceiver.
A low power consumption for the RS-485 communication
Onboard then 5.08 (mm) pitch 2P terminal to facilitate RS-485 communication wiring.
All pins of the chip have been lead to can be controlled through the microcontroller.
Convenient RS-485 communication wiring
Multiple Units can be connected to the same RS-485 bus wiring.
Compare
MCP2515 Can Bus Shield Board SPI Interface 9 Pins Standard Sub-D Connector Expansion Module
₹895.62(0 Reviews)
Features:
- SPI Interface up to 10 MHz.
- Implements CAN V2.0B at up to 1 Mb/s.
- Arduino/ Freaduino Completely compatible.
- Industrial standard 9 pin sub-D connector.
- Standard (11 bit) and extended (29 bit) data and remote frames
Compare
MCP2515 CAN Module TJA1050 Receiver SPI 51 Single Chip Program Routine Arduino
₹228.92(0 Reviews)
Features :
Input Supply voltage: 5V
Input Supply Current: 5 mA
Communication Rate: 1 Mbps
Support CAN V2.0B technical standard, communication rate 1Mb / S.
0 to 8 bytes long data field.
Use High-speed CAN transceiver TJA1050
SPI control for expanding Multi CAN bus interface
Use serial port could view the communication data
With the independent key, LED indicator, Power indicator
With power pin
Positioning screw hole center spacing 23 mm x 38 mm
The working current: typical 5mA, standby current 1 microamp. Except for the power indicator.
Compare
N76E003AT20 Minimum System Development Board
₹194.70(0 Reviews)
Specifications:
- 1T 8051 processor
- Max frequency up to16 MHz
- Wide operating voltage: 2.4V to 5.5V
- Temperature range: -40℃ to 105℃
- Up to 6-ch PWM
- Programmable dead-zone generator
- 18 KB of Flash memory
- 1 KB of SRAM
- Supports configurable Data Flash
- Supports program update by:
- ISP (In-System Programming)
- ICP (In-Circuit Programming)
- IAP (In-Application Programming)
Compare
NE555 + CD4017 Water Flowing Light LED Module DIY Kit
₹97.94(0 Reviews)
Specifications:
- Chip: NE555, CD4017.
- PCB Size: 54mm x 21mm
- PCB Thickness: 1.6mm.
- LED Color: Red.
- Voltage: 2.5V – 14.5V.
Compare
NE555 Pulse Frequency Duty Cycle Adjustable Module Square Wave Signal Generator
₹84.96(0 Reviews)
Specifications:
- Main chip: NE555
- Input Voltage: 5V-15V DC.
- Generate an adjustable pulse for MCU.
- Generate an adjustable pulse, to control circuitry associated.
Compare
New ESC USB Linker Programmer For Simonk BLHeli Firmware SN/BL/16A/20A/30A/40A
₹528.64(0 Reviews)
Features:
Direct plug design, works with most USB port and USB extension cable
Low power consumption design
Onboard 2?3 Pin AVR ISP port
3pin servo connector can be used as servo or C2 connection
Supports SIMONK and BLHELI ESC, KKflashtool compatible
KKflashtool and RapidFlash compatible
Silabs CP2102 Driver chip! (Win, Mac, Linux)
Software upgradeable (via Arduino or BLHELISUIT)
Pre-load as BLHELISUIT 4w-if 14.1 firmware