Showing 13–24 of 100 results
Compare
CH340G USB To TTL(Serial) Converter For Arduino Nano Raspberry Pi
₹97.94(0 Reviews)
Features:
TTL interface output, easy to connect to your MCU.
Dual 3.3V and 5V Power output, work with 3.3v and 5 V target device.
The mini-module is designed specifically for STC download and ARDUINO PRO supports all series of STC
Microcomputer with cold start reset button
Supports WIN7/VISTA/MAC/LINUX(32 bit /64-bit system)
Built-in USB to TTL Transfer chip.
Designed to be used for USB to TTL electronic projects.
Compare
CH341A 24 25 Series EEPROM Flash BIOS USB Programmer with Software and Driver
₹285.56(0 Reviews)
Features:
Support 24 EEPROM and 25 SPI flash 8pin or 16pin chip
With 24/25 status indicator lamp
Support USB to TTL conversion support 24EEPROM and 25 SPI flash 8pin/ 16pin chip
Recognize 25 series chip automatically
Supports download STC series procedure of single chip
SPI pin to support expanding the utility
STC microcontroller supports a full range of program download
Support expanding the utility by SPI pin
With SOP8 SOP16 to DIP8 converter board
Supports Windows XP, Vista, Win7 and Win8 (32/64bit) system
Provide 5V-3.3V power supply output
Compare
CJMCU MCP4725 I2C DAC Breakout Development Board
₹125.08(0 Reviews)
Feature:
- 12-bit resolution
- I2C Interface (Standard, Fast, and High-Speed supported)
- Small package
- 2.7V to 5.5V supply
- Internal EEPROM to store settings
Compare
CJMCU-1286 PIC16F1823 Microcontroller Development Board
₹413.00(0 Reviews)
Features:
- CJMCU-1286 is a PIC microcontroller minimum system,
- Running stability and high reliability
- SCM internal resources are relatively small,
- The microcontroller is simple and convenient to use.
- The operating voltage is 1.8V – 5.5V.
Compare
CJMCU-2551 MCP2551 CAN Protocol Controller High-speed Interface Module
₹248.98(0 Reviews)
Features:
- Supports 1 Mb/s operation
- Suitable for 12V and 24V systems
- The externally-controlled slope for reduced RFI emissions
- Detection of ground fault (permanent Dominant) on TXD input
- Power-on Reset and voltage brown-out protection
- An unpowered node or brown-out event will not disturb the CAN bus
- Low current standby operation
- Protection against damage due to short-circuit conditions (positive or negative battery voltage)
- Protection against high-voltage transients
- Automatic thermal shutdown protection
- Up to 112 nodes can be connected
- High-noise immunity due to differential bus implementation
- Temperature ranges: – Industrial (I): -40°C to +85°C – Extended (E): -40°C to +125°C
Compare
CJMCU-TRRS 3.5mm Jack AV Stereo Module
₹71.98(0 Reviews)
Features :
- Mini design, portable and easy to use.
- It is the audio-style connectors that you see on some phones, MP3 players, and development boards.
- TRRS stands for “Tip, Ring, Ring, Sleeve,” which reflects the fact that, unlike a standard stereo connector, this actually has three conductors and a ground.
- Some devices use the extra conductor for a microphone (like hands-free headsets) or to carry a video signal (like in some MP3/MP4 players).
Compare
CJMCU9813 Full Color LED RGB I2C Communication Drive Control Module
₹299.72(0 Reviews)
Specifications :
- IC input voltage: 5V-6.5V.
- Built-in LDO: 4.5V regulator output.
- Three-way drive: each drives current 0-45ma.
- Built-in ring oscillator(1.2MHZ) to support ongoing FREE-RUN modulation output.
- Maximum clock frequency: 15MHZ.
Compare
CP2112 debug board USB to I2C Communication Module
₹848.42(0 Reviews)
Features:
- On-chip power-on reset circuit, on-chip voltage regulator: 3.45 V output
- Compliant with USB specification 2.0 standard; full speed (12Mbps)
- USB suspend status via SUSPEND and /SUSPEND pins
- Integrated 194-byte one-time programmable ROM for storing customizable product information
- 512-byte SMBus data buffer, configurable clock speed device address 7-bit value is the slave address of CP2112
- Windows, Mac, and Linux HID to SMBus libraries API for rapid application development, open-access interface specifications.
- 8 GPIOs can be configured as input/output and open-drain/push-pull, configurable clock output for external devices 48MHz to 94kHz, switching LEDs during read/write SMBus
- Module size: 29.5mm*21.3mm, with two M3 mounting holes, one MicroUSB female port
- Application areas: Portable controllers, USB dongle, data logging
Compare
DB9 Female Screw Terminal to RS232 RS485 Conversion Board
₹119.18(0 Reviews)
Features :
- Brings all 9 pins of a DB9 connector to screw terminal blocks
- Adapter used for communication debug
- 9 pcs signal line was all lead out, name and number clearly labelled
- All-copper DR9 seat, anti-oxidation, better contact
- Military board, three anti-paint sprays an entire board, corrosion-resistant
- Terminal spacing 3.96MM, screw hole diameter 2MM, need to use a width of 2MM screwdriver for assembly;
- Use of environmentally friendly copper terminals, through IS0-9001
Compare
DC 3-5V X9C103S Digital Potentiometer Board Module for Arduino
₹198.24(0 Reviews)
Features:
- Supply voltage: 3V-5V
- Chip: X9C103S
- Dimensions : 28 x 14 x 4 (LxWxH) mm.
- 10K span potentiometer.
- Potentiometer center tap between the 0-10k slide in total 100
- VL and VH digital potentiometer sliding rheostat port corresponding to the low-end and high-end, allowing the input voltage range -5V to + 5V.
Compare
Digispark ATTINY85 Mini USB Development Board
₹197.06(0 Reviews)
Features :
- High Performance, Low Power AVR® 8-Bit Microcontroller
- Non-volatile Program and Data Memories
- 8K Bytes of In-System Programmable Program Memory Flash
- Endurance: 10,000 Write/Erase Cycles
- 512 Bytes In-System Programmable EEPROM
- 512 Bytes Internal SRAM
- Peripheral Features
- Two High-Frequency PWM Outputs with Separate Output Compare Registers
- USI – Universal Serial Interface (12C, SPI, 1-wire) with Start Condition Detector
- 10-bit ADC
