Others(11)

Test Hook Clip for Logic Analyzer Color: Multicolor

Features:

1. Single-channel AC dimmer Module.
2. High-quality BTA16-600B triac
3. For indoor and outdoor use.

Features :

1. High Performance, Low Power AVR® 8-Bit Microcontroller
2. Non-volatile Program and Data Memories
3. 8K Bytes of In-System Programmable Program Memory Flash
4. Endurance: 10,000 Write/Erase Cycles
5. 512 Bytes In-System Programmable EEPROM
6. 512 Bytes Internal SRAM
7. Peripheral Features
8. Two High-Frequency PWM Outputs with Separate Output Compare Registers
9. USI – Universal Serial Interface (12C, SPI, 1-wire) with Start Condition Detector
10. 10-bit ADC

Overview: Cytron has created this UIC-A so that users can use any programmer regardless of the development board. For example, a development board that uses PICkit2’s socket standard, which is 6-way header pins can be programmed with UIC000B by using the UIC-A!

Specifications:

1. Input Power: Through PC USB port or 12-24V power supply
2. Compatible Stepper Motor Driver: Max 5, 2-phase Microstep controllers
3. Driver type: Pulse and Direction signal control
4. Weight (gm): 78
5. Dimensions (mm) LxWxH: 90 x 70 x 20
6. Cable Length: 1.4 meter

Features:

1. SPI Interface up to 10 MHz.
2. Implements CAN V2.0B at up to 1 Mb/s.
3. Arduino/ Freaduino Completely compatible.
4. Industrial standard 9 pin sub-D connector.
5. Standard (11 bit) and extended (29 bit) data and remote frames

Features :

1. A d-type amplifier without a filter, low quiescent current, and low EMI.
2. When connects with a 4-ohm load and 5V power supply, the output power can be up to 3W.
3. Low THD, low noise.
4. Short circuit protection; thermal protection.
5. Input Voltage : 2.5-5.5 V(USB power supply).
6. Output Impedance : 4 ohm.
7. Efficiency : 90%.
8. Frequency Response : 150 Hz – 20 KHz.
9. Input Impedance : 2 Kohm.
10. Dimensions : 15 x 20 mm.

Specifications:

1. Working voltage: DC 7V-40V
2. Operating frequency 500Hz-100kHz (adjustable R6)
3. Maximum output current: 250mA
4. Output voltage: DC 5V
5. Size: 26 x 23mm

Specifications:

1. Logical light indication: a small light indicate CHO electrical level.
2. Input feature: 5PF,100K Ohm.
3. USB power supply; USB logic analyzer for monitoring, analyzing and debugging digital circuits
4. 8-Channels USB logic analyzer with a 24Mhz sampling frequency
5. Can analyze UART, IIC, and SPI, etc automatically
6. Great for MCU, ARM system and FPGA development
7. Voltage: 0-5.5V
8. Threshold Voltage: 1.5V

Specifications:

1. CP2102 Based – Better and Faster than Cheap PL2303 based boards
2. USB specification 2.0 compliant with full-speed 12Mbps.
3. Supports all Windows (Above Win98), Mac OS (Above 9) & Linux (Above 2.x.x)
4. Baud rates: 300 bps to 1 Mbps.
5. Byte receives buffer: 640 byte transmit buffer.
6. Create a virtual COM port and connect your old devices that use serial port communication
7. Compatible with both 3.3V & 5V levels
8. LED indication (ON only when the port is opened and being used, otherwise OFF)
9. Temperature Range: -40 to +85.