Breakout Boards(36)

Features :

1. For ESP32
2. Onboard Reset button and flashing firmware button
3. Includes the adapter board and male double row pins connectors (not soldered)
4. WiFi board ESP32 not included

QUICK OVERVIEW

1. Input Voltage: 4.5V to 15V
2. Output Voltage: 3.3V to 5V
3. Output Current: 800mA
4. Onboard AMS1117 chip.
5. Onboard power indicator to indicate power is turned on: Red LED.
6. Output voltage interface, connection to facilitate the experimental.
7. Small Compact Size, 3Pin Type, Breadboard Friendly

Features :

1. No. of Pinon USBASP side: 10.
2. No. of Pinon Device under programming side: 6.
3. Connector type on USBASP side: Male.
4. Connector type on Device under programming side: Female.
5. Header Pin Pitch: 2.54mm (0.1in).
6. Pin Numbers Text: Yes on Top and Bottom sides of every pin.

Features:

1. PS2 Connector breakout board
2. Connectors pre-soldered
3. Compatible with Lynxmotion PS2 V3 wireless controller
4. Holes compatible with Arduino and Lynxmotion Electronics
5. Dimensions: 45 x 22x 22 (L x W x H) mm
6. Weight: 12gm

QUICK OVERVIEW It can control LED module, light and so on. It is available for indoor LED, lighting lamp, DIY automotive lights dimming refit. With Single touch, using the principle of capacitance touch. The default function is a switch, dimming, with brightness memories LED touch dimming. It will light slowly when turning on the lights, and become dark slowly when turn off, which effectively avoid the stimulation to eyes.

Features:

1. 2V to 6V operation
2. “On” resistance: 70 Ohms @ 4.5V
3. 6ns break-before-make @ 4.5V
4. Wide operating temperature range: -55C to 125C

Feature:

• 12-bit resolution
• I2C Interface (Standard, Fast, and High-Speed supported)
• Small package
• 2.7V to 5.5V supply
• Internal EEPROM to store settings

Features:

• CJMCU-1286 is a PIC microcontroller minimum system,
• Running stability and high reliability
• SCM internal resources are relatively small,
• The microcontroller is simple and convenient to use.
• The operating voltage is 1.8V – 5.5V.

Features:

1.  Supports 1 Mb/s operation
2. Suitable for 12V and 24V systems
3. The externally-controlled slope for reduced RFI emissions
4.  Detection of ground fault (permanent Dominant) on TXD input
5. Power-on Reset and voltage brown-out protection
6. An unpowered node or brown-out event will not disturb the CAN bus
7. Low current standby operation
8. Protection against damage due to short-circuit conditions (positive or negative battery voltage)
9. Protection against high-voltage transients
10. Automatic thermal shutdown protection
11. Up to 112 nodes can be connected
12. High-noise immunity due to differential bus implementation
13. Temperature ranges: – Industrial (I): -40°C to +85°C – Extended (E): -40°C to +125°C

Features :

1. Mini design, portable and easy to use.
2. It is the audio-style connectors that you see on some phones, MP3 players, and development boards.
3. TRRS stands for “Tip, Ring, Ring, Sleeve,” which reflects the fact that, unlike a standard stereo connector, this actually has three conductors and a ground.
4. Some devices use the extra conductor for a microphone (like hands-free headsets) or to carry a video signal (like in some MP3/MP4 players).

Specifications :

• IC input voltage: 5V-6.5V.
• Built-in LDO: 4.5V regulator output.
• Three-way drive: each drives current 0-45ma.
• Built-in ring oscillator(1.2MHZ) to support ongoing FREE-RUN modulation output.
• Maximum clock frequency: 15MHZ.

Features:

1. On-chip power-on reset circuit, on-chip voltage regulator: 3.45 V output
2. Compliant with USB specification 2.0 standard; full speed (12Mbps)
3. USB suspend status via SUSPEND and /SUSPEND pins
4. Integrated 194-byte one-time programmable ROM for storing customizable product information
5. 512-byte SMBus data buffer, configurable clock speed device address 7-bit value is the slave address of CP2112
6. Windows, Mac, and Linux HID to SMBus libraries API for rapid application development, open-access interface specifications.
7. 8 GPIOs can be configured as input/output and open-drain/push-pull, configurable clock output for external devices 48MHz to 94kHz, switching LEDs during read/write SMBus
8. Module size: 29.5mm*21.3mm, with two M3 mounting holes, one MicroUSB female port
9. Application areas: Portable controllers, USB dongle, data logging