Showing 49–60 of 61 results
Compare
Pro Mini ATMEGA328P 5V/16M Blue - Standard Version
₹238.96(0 Reviews)
Specifications:
- Microcontroller: ATmega328
- Circuit Operating Voltage: 5V
- Clock frequency: 16MHz.
- Digital I/O Pins: 14
- 8 analog input port: A0 ~ A7.
- A pair of TTL level serial port transceiver : RX / TX.
- 6 PWM port: D3, D5, D6, D9, D10, D11.
- Support serial download.
Compare
Proto Screw Shield 1.0 For Arduino Uno
₹358.72(0 Reviews)
Specifications:
- Arduino terminal to provide the IO, port connection.
- 3.81 posts quality, reliable, convenient, durable.
- Combined with the Proto Shield, the middle can be used as a prototype expansion board.
- Double-sided PCB Prototyping extended area vias connecting the front sides can be welded components.
- The middle section can be placed small bread plate, convenient test extend
Compare
Prototype Shield V3.0 For Arduino Mega with breadboard
₹310.34(0 Reviews)
Quick Overview:
- The shield can support being fully assembled with Arduino MEGA
- Support soldering components directly on this shield
- Support sticking the mini breadboards on this shield
- Reset button up top
- Mainboard aureate quadrate
- With SOP28 SMT components encapsulation
Compare
Ramps 1.4 Board 3D Printer Control Panel Mega Shield
₹587.64(0 Reviews)
Specifications:
- Supply Voltage: 12V
- Standard interfaces (as that of the extruder)
- Reserved GCI like I2C and RS232
- 3 MOSFET’s are applied to the heater/ fan and thermistor circuit.
- Another 5A added to protect the component parts.
- An 11A fuse is added to the hotbed.
- Support 5 stepper drive board
Compare
Screw Shields V2 Terminal Expansion Board
₹313.88(0 Reviews)
Specifications:
- Dimensions : 66 x 19 x 16 (LxWxH) mm.
- Weight: 28 gm.
- I/O Screw terminals.
- Directly plug-able.
- Arduino Compatible.
- Compatible with Arduino UNO R3, Arduino UNO
Compare
SIM900 GSM GPRS Quad-Band Modules 2G Development Shield Board for Arduino UNO R3 Mega with Antenna
₹1,475.00(0 Reviews)
Features:
- Standard serial RS232 interface
- Serial TTL interface for direct interface to microcontrollers
- Power, Status and Network LEDs for easy debugging
- Onboard MIC/Speaker circuits and 3.5mm audio connectors.
- Standard AT commands
- Comes with an onboard wire antenna for better reception. Board provides an option for adding an external antenna through an SMA connector
- Adjustable serial baudrate from 1200 to 115200 bps
Compare
SmartElex PS2 Sheild for Arduino
₹590.00(0 Reviews)
- Simple to use UART protocol
- Vibrator motor on PS2 is controllable.
- Wired and Wireless PS2 controller is supported.
- PS2 Controller will automatically operate in analog mode. (Default)
- A status LED
- Jumper selector to select different UART Baud Rate (74880 (Default), 9600, 57600, 115200). Default: – when no jumper is attached.
- Jumper selectors to select different digital pin as UART – TX and RX pin.
Compare
UNO Based ESP8266 Nodemcu Development Board
₹424.80(0 Reviews)
Specifications:
- Based on ESP-8266EX.
- Arduino compatible, using Arduino IDE to program.
- Support OTA wireless upload.
- Onboard 5V 1A Switching Power Supply (highest input voltage 24V).
- The direct use of Arduino IDE development, the same operation with Arduino UNO.
- Operating Voltage: 3.3V
- Digital I/O Pins: 11
- Analog Input Pins: 1
Compare
UNO Case Acrylic
₹149.86(0 Reviews)
Features
- This case provides easy access to all ports.
- It requires no tools for easy assembly and disassembly.
- Simply Clicks Together Enclosure.
- Dimensions : 79.5 x 64.5 x 21 mm.
- Material: A grade acrylic sheet.
- For Arduino UNO R3 Development Board only.
- With screw copper pillar and installation instructions.
- To protect your little computer against damages, dust and scratches Clear Top and Bottom.
Compare
Uno R3 CH340G ATMega328P Development Board Compatible with Arduino
₹258.42(0 Reviews)
Specifications:
- Microcontroller ATmega328 (SMD) – Interface CH340G
- Operating Voltage: 5V
- Input Voltage (recommended): 7-12V
- Input Voltage (limits): 5-20V
- Digital I / O Pins 14 (of which 6 provide PWM output)
- Analog Input Pins: 6
Compare
Uno+WiFi R3 AtMega328p+NodeMSU ESP8266 32mb Memory USB-TTL CH340G Compatible for Arduino UNO
₹885.00(0 Reviews)
Specifications:
- USB-TTL converter.
- Logic Level: 5V.
- Operating Supply Voltage: 5V.
- Digital I/O Pins: 14.
- Analog I/O Pins: 6.
Compare
USB HOST SHIELD ADK Arduino Compatible
₹698.56(0 Reviews)
Specifications:
- Works with standard (dual 5/3.3V) and 3.3V-only (for example, Pro Arduino) boards.
- Complies with USB Specification Revision 2.0 (Full-Speed 12Mbps Peripheral, Full-/Low-Speed 12Mbps/1.5Mbps Host)
- Supports HID devices, such as keyboards, mice, joysticks, etc.
- Compatible with Mass storage devices, such as USB sticks, memory card readers, external hard drives (FAT32 Type File System – Mega Arduino only).
