Due to the COVID 19 epidemic, orders may be processed with a slight delay

Search

Showing 37–48 of 61 results

Sort by
Compare

LilyPad Pixel Board WS2812 RGB LED Module for Arduino

179.36
(0 Reviews)
Specifications: Outer Diameter (OD)(mm): 20mm Thickness (mm): 0.9 Weight: 0.095 kg
179.36
Compare

LilyPad Slide Switch Module

59.00
(0 Reviews)
Quick Overview: LilyPad is a wearable e-textile technology. Each LilyPad was creatively designed to have large connecting pads to allow them to be sewn into clothing. Various input, output, power, and sensor boards are available. They’re even washable!
59.00
Compare

LilyPad Tri-Color LED RGB Module for Arduino

89.68
(0 Reviews)
QUICK OVERVIEW LilyPad is a wearable e-textile technology. Each LilyPad was creatively designed to have large connecting pads to allow them to be sewn into clothing. Various input, output, power, and sensor boards are available. They’re even washable!
89.68
Compare

Mega +WiFi R3 Atmega2560+NodeMCU ESP8266 32Mb Memory USB-TTL CH340G Compatible For Arduino Mega

1,090.32
(0 Reviews)
Specifications: It is a customized version of the classic ARDUINO MEGA R3 board. Full integration of Atmel ATmega2560 microcontroller and ESP8266 Wi-Fi IC, with 32 Mb (megabits) of flash memory, and CH340G USB-TTL converter on a single board! All components can be set up to work together or independently.
1,090.32
Compare

Mini Motor Drive Shield Expansion Board L293D Module for Arduino UNO MEGA 2560

129.00
(0 Reviews)
Specifications:
  1. New L293D motor shield, the input voltage DC4.5-25V
  2. 600mA output current capability per channel
  3. 1.2A peak output current(non-repetitive) per channel
  4. Enable facility
  5. Overtemperature protection
  6. Logical “0” input voltage up to 1.5V(High noise immunity)
129.00
Compare

Nano CH340 Chip Board without USB cable compatible with Arduino (Soldered)

194.70
(0 Reviews)
Specifications:
  1. Operating Voltage (logic level): 5V
  2. With Soldered Connector
  3. 8 analog inputs ports: A0 ~ A7
  4. 14 Digital input / output ports: TX, RX, D2 ~ D13
  5. 1 pair of TTL level serial transceiver ports RX / TX
  6. Using Atmel Atmega328P-AU MCU
  7. There is a bootloader installed in it
  8. Standard 0.1” spacing DIP (breadboard friendly).
  9. Manual reset switch.
194.70
Compare

Nano Expansion Board

148.68
(0 Reviews)
Features:
  • 14 I/O Pin (servo type with GND, power, and signal).
  • 8 analog Pin with power output and GND.
  • 6 PWM Pin.
  • 1 Servo power input.
  • 5 I2C expansion Pin.
  • 1 AREF output.
  • 1 3.3V output.
148.68
Compare

NANO IO Shield Expansion Board For Arduino Screw Terminals

248.98
(0 Reviews)
Specifications:
  1. Compatible with Arduino NANO
  2. All digital and analog pins breakout
  3. Compact size.
  4. Leads all pins out, convenient for wiring and doing experiments.
  5. Dimensions: 53 x 36 x 12 (LxWxH) mm.
  6. Weight: 22 gm.
248.98
Compare

Original Arduino Uno R3

1,597.72
(0 Reviews)
Specifications:
  1. Microcontroller: ATmega328
  2. Operating Voltage : 5V
  3. Input Voltage (recommended) 7-12V
  4. Input Voltage (limits) : 6-12V
  5. Digital I/O Pins : 14 (of which 6 provide PWM output)
  6. Analog Input Pins : 6
  7. DC Current per I/O Pin : 40 mA
  8. DC Current for : 3.3V Pin 50 mA
  9. Flash Memory : 32 KB (ATmega328) of which 0.5 KB used by bootloader
  10. SRAM : 2 KB (ATmega328)
  11. EEPROM : 1 KB (ATmega328)
  12. Clock Speed : 16 MHz
1,597.72
Compare

OV7670 Camera Arduino Compatible

298.54
(0 Reviews)
Specifications:
  • IO Voltage: 2.5V to 3.0V.
  • Operating Power: 60mW/15fps.
  • Lens Size: 1/6″.
  • Sleeping Mode: <20 uA.
  • Pixel Coverage: 3.6μm x 3.6μm.
  • Electronic Exposure: 1 to 510 row.
  • Dynamic range: 52 dB.
298.54
Compare

Pro Micro 5V 16M Mini Leonardo Micro-controller Development Board For Arduino

349.00
(0 Reviews)
Specifications:
  1. ATMEGA32U4 running in 5V / 16MHz
  2. Support Arduino IDE V1.0.1
  3. Micro USB interface programming on the board
  4. Four 10-bit ADC pin
  5. 12 digital I / O (5 PWM capability)
  6. Rx and Tx hardware serial connection
349.00
Compare

Pro Mini ATMEGA328P 3.3V/8M (Official Version)

228.92
(0 Reviews)
specifications:
  1. Microcontroller: ATmega328
  2. Circuit Operating Voltage: 3.3V
  3. Clock frequency: 8MHz.
  4. Digital I/O Pins: 14
  5. 8 analog input port: A0 ~ A7.
  6. A pair of TTL level serial port transceiver : RX / TX.
  7. 6 PWM port: D3, D5, D6, D9, D10, D11.
  8. Support serial download.
228.92

Back to Top
Product has been added to your cart