Showing 25–36 of 61 results
Compare
Due AT91SAM3X8E ARM Cortex-M3 Board, 84MHz, 512KB Board compatible with Arduino
₹1,574.12(0 Reviews)
Specifications:
- Microcontroller: AT91SAM3X8E
- Operating Voltage: 3.3V
- Input Voltage (recommended): 7-12V
- Input Voltage (limits): 6-16V
- Digital I/O Pins: 54 (of which 12 provide PWM output)
- Analog Input Pins: 12
- Analog Outputs Pins: 2 (DAC)
- A 32-bit core, that allows operations on 4 bytes wide data within a single CPU clock.
- CPU clock at 84Mhz
- 96KBytes of SRAM
Compare
ESPLORA Joystick Photosensitive Sensor Board Compatible with Arduino (Supports LCD)
₹2,403.66(0 Reviews)
Specifications:
- Microcontroller: ATmega32u4
- Operating Voltage: 5V
- Flash Memory: 32 KB of which 4 KB used by bootloader
- SRAM: 2.5 KB
- EEPROM: 1 KB
- Clock Speed: 16 MHz
Compare
Ethernet W5100 Shield Network Expansion Board w/ Micro SD Card Slot for Arduino
₹490.30(0 Reviews)
Specifications:
- Based on the W5100Based on the Wiznet W5100 allows an Arduino board to connect to the internet.
- Stackable Design, can directly be supported by for Arduino official Ethernet Library.
- Supports up to four simultaneous socket connections
- Can be used to store files for serving over the network.
- Can be accessed using the Mini SD TF library.
- IEEE802.3af compliant
- Low output ripple and noise (100mVpp)
- Overload and short-circuit protection
Compare
L293D Motor Driver/Servo Shield for Arduino
₹179.36(0 Reviews)
Specifications:
- 2 connections for 5V ‘hobby’ servos connected to the Arduino’s high-resolution dedicated timer
- 4 H-Bridges: L293D chipset provides 0.6A per bridge (1.2A peak) with thermal shutdown protection, internal kickback protection diodes.
- Can run motors on 4.5VDC to 25VDC.
- Up to 4 bi-directional DC motors with individual 8-bit speed selection (so, about 0.5% resolution)
- Up to 2 stepper motors (unipolar or bipolar) with single coil, double coil, or interleaved stepping.
- Pull-down resistors keep motors disabled during power-up
- Big terminal block connectors to easily hook up wires (18-26AWG) and power
- Arduino reset button brought up top
- 2-pin terminal block and jumper to connect external power, for separate logic/motor supplies
- Tested compatible with Arduino Mega 1280 & 2560, Diecimila, Duemilanove, and UNO
- Download the easy-to-use Arduino software library, check out the examples and you’re ready to go!
Compare
Leonardo R3 Board Micro-USB compatible with Arduino
₹578.20(0 Reviews)
Specifications:
- Microcontroller: ATmega32u4
- Operating Voltage: 5V
- Input Voltage (Recommended): 7-12V
- Input Voltage (limits): 6-20V
- Digital I/O Pins: 20
- PWM Channels: 7
- Analog Input Channels: 12
Compare
LilyPad Button Board Module For Arduino
₹59.00(0 Reviews)
Quick Overview:
LilyPad is a wearable e-textile technology. Each LilyPad was creatively designed to have large connecting pads to allow them to be sewn into clothing. Various input, output, power, and sensor boards are available. They’re even washable!
Compare
LilyPad Button Board Module For Arduino
₹59.00(0 Reviews)
Quick Overview:
LilyPad is a wearable e-textile technology. Each LilyPad was creatively designed to have large connecting pads to allow them to be sewn into clothing. Various input, output, power, and sensor boards are available. They’re even washable!
Compare
LilyPad Coin Cell Battery Holder CR2032 Battery Module
₹119.18(0 Reviews)
Quick Overview:
- Model: LilyPad
- Colour: Purple
- Material: CCL
- Dimensions: 30 x 30 x 6 (LxWxH) mm.
- Weight: 3 gm.
Compare
LilyPad LED Blue Color
₹59.00(0 Reviews)
Quick Overview:
LilyPad is a wearable e-textile technology. Each LilyPad piece was creatively designed with large sew tabs to allow them to be sewn into the fabric. Various input, output, power and sensor boards are available. They’re even washable (with special care)!
Compare
LilyPad LED White Color
₹60.18(0 Reviews)
Quick Overview:
LilyPad is a wearable e-textile technology. Each LilyPad piece was creatively designed with large sew tabs to allow them to be sewn into the fabric. Various input, output, power and sensor boards are available. They’re even washable (with special care)!
Compare
LilyPad Pixel Board WS2812 RGB LED Module for Arduino
₹179.36(0 Reviews)
QUICK OVERVIEW
LilyPad is a wearable e-textile technology. Each LilyPad was creatively designed to have large connecting pads to allow them to be sewn into clothing. Various input, output, power, and sensor boards are available. They’re even washable!