Bestsellers in Arduino
Compare
Uno R3 CH340G ATMega328P Development Board Compatible with Arduino
₹258.42(0 Reviews)
Specifications:
- Microcontroller ATmega328 (SMD) – Interface CH340G
- Operating Voltage: 5V
- Input Voltage (recommended): 7-12V
- Input Voltage (limits): 5-20V
- Digital I / O Pins 14 (of which 6 provide PWM output)
- Analog Input Pins: 6
Compare
BPiDuino UNO Board Module (To make BANANA PI compatible with Arduino UNO)
₹849.60(0 Reviews)
Specifications:
- ATmega328 chip on the module
- Compatible with for Arduino Uno
- Switch 5V or 3.3V GPIO
- Compatible with Processing code
- Expand SPI of Banana Pi
- Working voltage: 3.3V-4.5V
- GPIO voltage: 3.3V or 5.5
- 8 channel 10bit high-resolution ADC
Compare
Prototype Shield V3.0 For Arduino Mega with breadboard
₹310.34(0 Reviews)
Quick Overview:
- The shield can support being fully assembled with Arduino MEGA
- Support soldering components directly on this shield
- Support sticking the mini breadboards on this shield
- Reset button up top
- Mainboard aureate quadrate
- With SOP28 SMT components encapsulation
Compare
Pro Mini ATMEGA328P 5V/16M Blue - Standard Version
₹238.96(0 Reviews)
Specifications:
- Microcontroller: ATmega328
- Circuit Operating Voltage: 5V
- Clock frequency: 16MHz.
- Digital I/O Pins: 14
- 8 analog input port: A0 ~ A7.
- A pair of TTL level serial port transceiver : RX / TX.
- 6 PWM port: D3, D5, D6, D9, D10, D11.
- Support serial download.
Compare
2.4 inch Touch TFT LCD Arduino Shield
₹566.40(0 Reviews)
Specifications:
-
- 2.4″ diagonal Touch LCD TFT display
- 240×320 resolution, 18-bit (262,000) color
- 8 bit digital interface, plus 4 control lines
- Uses digital pins 5-13 and analog 0-3. That means you can use digital pins 2, 3 and analog 4 and 5. Pin 12 is available if not using the microSD
- Works with any Arduino UNO
- 5V compatible! Use with 3.3V or 5V logic
- 4 white LED backlight. On by default but you can connect the transistor to a digital pin for backlight control
- Onboard 3.3V 300mA LDO regulator
Compare
Cytron 10A Motor Driver Shield - MD10
₹1,563.50(0 Reviews)
Specifications:
- Bi-directional control of 1 brushed DC motor.
- Support motor voltage ranges from 7V to 25V, .
- Maximum current up to 10A continuous and 15A peak (10 seconds).
- Solid state components provide faster response time and eliminate the wear and tear of a mechanical relay.
- Fully NMOS H-Bridge for better efficiency and no heat sink is required.
- Speed control PWM frequency up to 10KHz.
- Selectable digital pins for PWM and DIR.
Compare
Cytron Maker UNO Microcontroller Board- Arduino UNO Compatible Module
₹689.12(0 Reviews)
Specifications:
- SMD ATmega328P microcontroller(the same microcontroller on Arduino UNO) with Optiboot (UNO) Bootloader
- USB Programming facilitated by the CH340
- Input voltage: USB 5V, from computer, power bank or standard USB adapter
- Piezo buzzer that will act as simple audio output
- 500mA (maximum) 3.3V voltage regulator
- 0-5V outputs with 3.3V compatible inputs
- 14 Digital I/O Pins (6 PWM outputs)
- 6 Analog Inputs
- ISP 6-pin Header
Showing 1–12 of 61 results
Compare
1.44 inch TFT LCD Color Screen Module SPI Interface
₹489.99(0 Reviews)
Specifications:
- Display Size: 1.44″
- Driver IC: ST7735
- Input Voltage (V): 3.3 to 5
- Pixel Resolution: 128 x 128
- PCB Size (mm): 44×30 (LxW)
- Interface Type: SPI
Compare
1.8 Inch TFT LCD Module 128 x 160 with 4 IO SPI
₹549.88(0 Reviews)
Specifications:
- Display Size: 1.8″
- Driver IC: ST7735
- Input Voltage (V): 3.3 to 5
- Pixel Resolution: 128 x 160
- PCB Size (mm): 62×38 (LxW)
- Interface Type: SPI
Compare
1602 LCD Keypad Shield Green Backlight
₹230.10(0 Reviews)
Specifications:
- The LCD Keypad shield is developed for Arduino compatible boards, to provide a user-friendly interface that allows users to go through the menu, make selections etc.
- It consists of a 1602 white character green backlight LCD.
- The keypad consists of 6 keys select, up, right, down, left and reset.
- To save the digital IO pins, the keypad interface only uses one ADC channel.
- The key value is read out through a 5 stage voltage divider.
Compare
2.4 inch Touch TFT LCD Arduino Shield
₹566.40(0 Reviews)
Specifications:
-
- 2.4″ diagonal Touch LCD TFT display
- 240×320 resolution, 18-bit (262,000) color
- 8 bit digital interface, plus 4 control lines
- Uses digital pins 5-13 and analog 0-3. That means you can use digital pins 2, 3 and analog 4 and 5. Pin 12 is available if not using the microSD
- Works with any Arduino UNO
- 5V compatible! Use with 3.3V or 5V logic
- 4 white LED backlight. On by default but you can connect the transistor to a digital pin for backlight control
- Onboard 3.3V 300mA LDO regulator
Compare
2.4 inch Touch TFT LCD Arduino Shield
₹566.40(0 Reviews)
Specifications:
-
- 2.4″ diagonal Touch LCD TFT display
- 240×320 resolution, 18-bit (262,000) color
- 8 bit digital interface, plus 4 control lines
- Uses digital pins 5-13 and analog 0-3. That means you can use digital pins 2, 3 and analog 4 and 5. Pin 12 is available if not using the microSD
- Works with any Arduino UNO
- 5V compatible! Use with 3.3V or 5V logic
- 4 white LED backlight. On by default but you can connect the transistor to a digital pin for backlight control
- Onboard 3.3V 300mA LDO regulator
Compare
3.5 inch TFT Arduino Shield
₹1,499.78(0 Reviews)
Specifications:
- LCD’s type: TFT
- LCD interface: SPI
- Touch screen type: Resistive
- Colours: RGB,65K colours
- Resolution: 480*320 pixels
- Aspect ratio: 8:5
- I/O Voltage: 3.3/5V
Compare
3.5 inch TFT Arduino Shield
₹1,499.78(0 Reviews)
Specifications:
- LCD’s type: TFT
- LCD interface: SPI
- Touch screen type: Resistive
- Colours: RGB,65K colours
- Resolution: 480*320 pixels
- Aspect ratio: 8:5
- I/O Voltage: 3.3/5V
Compare
Acrylic Case for Arduino Mega
₹148.68(0 Reviews)
Features
- Protective case of Mega 2560.
- Color: Transparent.
- Fastened by eight screws.
- Made by high grade acrylic.
- Provides excellent protection, with fashion appearance.
- Unique design for Mega 2560 with pin leakage, which provides easy connection to other components
Compare
ARDUINO LELY PAD BIG ATMEGA328P
₹350.46(0 Reviews)
Features
- Microcontroller : ATmega168V or ATmega328V
- Operating Voltage 2.7-5.5 V
- Input Voltage 2.7-5.5 V
- Digital I/O Pins 14 (of which 6 provide PWM output)
- Analog Input Pins 6
- DC Current per I/O Pin 40 mA
- Flash Memory 16 KB (of which 2 KB used by bootloader)
- SRAM 1 KB EEPROM 512 bytes Clock Speed 8 MHz
Compare
Arduino Mega ATMEGA2560 16U
₹885.00(0 Reviews)
Features
- Microcontroller : ATmega2560
- Operating Voltage : 5V
- Input Voltage (recommended) : 7-12V
- Input Voltage (limit) : 6-20V
- Digital I/O Pins : 54 (of which 15 provide PWM output)
- Analog Input Pins : 16
- DC Current per I/O Pin : 20 mA
- DC Current for 3.3V Pin : 50 mA
- Flash Memory : 256 KB of which 8 KB used by bootloader
- SRAM : 8 KB
- EEPROM : 4 KB
- Clock Speed : 16 MHz
- LED BUILTIN : 13
Compare
Arduino Micro V2 Board ATMEGA32U4 i-Robotics
₹767.00(0 Reviews)
Specifications:
- Manufacturer: i-Robotics
- Support TWI and SPI communication
- Input voltage (recommended) range from 7V to 12V
- Input Voltage (limit) range from 6V to 20V
- 20 digital input/output pins (of which 7 can be used as PWM outputs and 12 as analog inputs)
- Onboard ATmega32u4 microcontroller with 32KB flash memory, 2.5KB SRAM and 1KB EEPROM