Arduino Boards(23)

Quick Overview: LilyPad is a wearable e-textile technology. Each LilyPad was creatively designed to have large connecting pads to allow them to be sewn into clothing. Various input, output, power, and sensor boards are available. They’re even washable!

Specifications: It is a customized version of the classic ARDUINO MEGA R3 board. Full integration of Atmel ATmega2560 microcontroller and ESP8266 Wi-Fi IC, with 32 Mb (megabits) of flash memory, and CH340G USB-TTL converter on a single board! All components can be set up to work together or independently.

Specifications:

1. Operating Voltage (logic level): 5V
2. With Soldered Connector
3. 8 analog inputs ports: A0 ~ A7
4. 14 Digital input / output ports: TX, RX, D2 ~ D13
5. 1 pair of TTL level serial transceiver ports RX / TX
6. Using Atmel Atmega328P-AU MCU
7. There is a bootloader installed in it
8. Standard 0.1” spacing DIP (breadboard friendly).
9. Manual reset switch.

Specifications:

1. Microcontroller: ATmega328
2. Operating Voltage : 5V
3. Input Voltage (recommended) 7-12V
4. Input Voltage (limits) : 6-12V
5. Digital I/O Pins : 14 (of which 6 provide PWM output)
6. Analog Input Pins : 6
7. DC Current per I/O Pin : 40 mA
8. DC Current for : 3.3V Pin 50 mA
9. Flash Memory : 32 KB (ATmega328) of which 0.5 KB used by bootloader
10. SRAM : 2 KB (ATmega328)
11. EEPROM : 1 KB (ATmega328)
12. Clock Speed : 16 MHz

Specifications:

1. ATMEGA32U4 running in 5V / 16MHz
2. Support Arduino IDE V1.0.1
3. Micro USB interface programming on the board
4. Four 10-bit ADC pin
5. 12 digital I / O (5 PWM capability)
6. Rx and Tx hardware serial connection

specifications:

1. Microcontroller: ATmega328
2. Circuit Operating Voltage: 3.3V
3. Clock frequency: 8MHz.
4. Digital I/O Pins: 14
5. 8 analog input port: A0 ~ A7.
6. A pair of TTL level serial port transceiver : RX / TX.
7. 6 PWM port: D3, D5, D6, D9, D10, D11.
8. Support serial download.

Specifications:

1. Microcontroller: ATmega328
2. Circuit Operating Voltage: 5V
3. Clock frequency: 16MHz.
4. Digital I/O Pins: 14
5. 8 analog input port: A0 ~ A7.
6. A pair of TTL level serial port transceiver : RX / TX.
7. 6 PWM port: D3, D5, D6, D9, D10, D11.
8. Support serial download.

Specifications:

1. Based on ESP-8266EX.
2. Arduino compatible, using Arduino IDE to program.
3. Support OTA wireless upload.
4. Onboard 5V 1A Switching Power Supply (highest input voltage 24V).
5. The direct use of Arduino IDE development, the same operation with Arduino UNO.
6. Operating Voltage: 3.3V
7. Digital I/O Pins: 11
8. Analog Input Pins: 1

Specifications:

1. Microcontroller ATmega328 (SMD) – Interface CH340G
2. Operating Voltage: 5V
3. Input Voltage (recommended): 7-12V
4. Input Voltage (limits): 5-20V
5. Digital I / O Pins 14 (of which 6 provide PWM output)
6. Analog Input Pins: 6

Specifications:

1. USB-TTL converter.
2. Logic Level: 5V.
3. Operating Supply Voltage: 5V.
4. Digital I/O Pins: 14.
5. Analog I/O Pins: 6.

Specifications:

1. It comes with USB and is more convenient to use.
2. The 8F328D can be powered by 3V3 and 5V, operating at 16M frequencies with excellent levels of compatibility.
3. Built-in high precision RC, without external crystal oscillator, can be stable operation.
4. Less peripheral parts, simple circuit design.
5. 12 bit ADC (analog to digital conversion)
6. Bring DAC
7. Own GUID (unique ID) can be used for chip program encryption
8. Comes with an internal 1.024V/2.048V/4.096V + 1% calibration reference voltage source.