Due to the COVID 19 epidemic, orders may be processed with a slight delay

Search

In Stock

JST-XH 5S Wire Extension 20cm

Features:

  1. Dimensions: 210 x 17 mm(LxW)
  2. Weight: 8 gm.
  3.  Fit for 5S Lipo battery.
  4.  Wire Sleeve material: Silicon

53.10

Compare
SKU:cds-bps-c-5s

This JST-XH 5S Wire Extension 20cm is widely used to connect lipo battery, especially for RC helicopter, Rc Airplane, Rc Cars, Racing Rc Quadcopter, and Multirotors.

This Extension Lead is for connecting the Lipo Balance Lead to your charger, making it much easier to connect because the balance lead on the lipo battery is much shorter than the charging lead.

Package Includes :

1 x JST-XH 5S Wire Extension 20cm.

Reviews

There are no reviews yet.

Write a review

Your email address will not be published. Required fields are marked *

Bestsellers

Compare

2S-6S Lipo Battery with XT60 Plug to USB Cellphone Charger Adapter with Voltage Display

448.40
(0 Reviews)
Specification:
  1. Input: 6 to 26VDC (2S-6S LiPo Batteries)
  2. Output: 5V-2A DC
  3. Input Connector Type: XT60 plug Male
  4. Output Interface: USB
  5. 7 Segment LED Display to monitor battery Voltage
  6. Anti-slip plug, good contact performance
  7. Precision display by TW programmed MCU
Compare

SkyRC Temperature Control Sensor Cable For B6 / B6ac Lipo Battery Charger

429.04
(0 Reviews)
Specification:
  • Temperature range: 0℃-80℃
  • Wire length: 45cm
  • Velcro length: 22cm
  • Material: Composite Material Plastic
Compare

36V Auto Cutoff lithium ion Battery Pack Charger

1,829.00
(0 Reviews)
Specifications:
  • Auto cut-off Voltage: 42V
  • Charge Current: 3A
  • Input Voltage: AC 230V
  • Battery Pack: 36V Lithium Ion
  • High Quality Charger
  • Ebike, Electric cycle Battery  Charging Purpose
Compare

CN3791 12V MPPT Solar Lipo Charger Module

413.00
(0 Reviews)
Specifications:
  • Input voltage: select the corresponding module according to the nominal voltage of the solar panel (6V/9V/12V)
  • Output voltage: nominal 3.7V full charge voltage 4.2V lithium battery
  • Interface:  2-pin JST connectors (or PH2.0)
  • Max Charging current: 2A
  • PWM switching frequency: 300KHz
  • Charging voltage: 4.2V ± 1%
  • Working environment temperature: -40 ° C to +85 ° C
Compare

CN3791 6V MPPT Solar Lipo Charger Module

413.00
(0 Reviews)
Specifications:
  • Input voltage: select the corresponding module according to the nominal voltage of the solar panel (6V/9V/12V)
  • Output voltage: nominal 3.7V full charge voltage 4.2V lithium battery
  • Interface:  2-pin JST connectors (or PH2.0)
  • Max Charging current: 2A
  • PWM switching frequency: 300KHz
  • Charging voltage: 4.2V ± 1%
  • Working environment temperature: -40 ° C to +85 ° C

Back to Top
Product has been added to your cart