Due to the COVID 19 epidemic, orders may be processed with a slight delay

Search

In Stock

Meco 101B+ Digital Multimeter Pocket Size

Specification:

  • LCD With Backlight.
  • APO, Capacitance, Frequency.
  • Duty Cycle: 0.1-99%.
  • SP Function: Diode test, Audible Continuity, Data Hold.
  • Low Battery is Indicated.
  • Battery Life: 200 Hours Typical.
  • Measuring Category: CAT III 600V, CAT II 1000V.

1,829.00

Compare
SKU:cds-te-ma-101b

This brand new and Latest Digital Multimeter Small Yellow Color LCD AC DC Measuring Voltage Current is a Small Multimeter for your day to day needs. If you have basic knowledge about Multimeters you can try this small Multimeter for basic continuity checks, Voltage Measurements and many more. 

A multimeter or a multitester, also known as a VOM (Volt-Ohm meter), is an electronic measuring instrument that combines several measurement functions in one unit. A typical multimeter would include basic features such as the ability to measure voltage, current, and resistance.

Analog multimeters use a microammeter whose pointer moves over a scale calibrated for all the different measurements that can be made. Digital multimeters (DMM, DVOM) display the measured value in numerals, and may also display a bar of a length proportional to the quantity being measured. Digital multimeters are now far more common than analog ones, but analog multimeters are still preferable in some cases, for example when monitoring a rapidly-varying.

When testing the magnifying ratio of the transistor, turn the switch to the hFE position and connect the transistor to the eight-hole jack available in blue color. For the Square wave output, the frequency is 50Hz, the voltage is approximately 3Vp-p. The output jack is “VΩmA” and “COM”.

Reviews

There are no reviews yet.

Write a review

Your email address will not be published. Required fields are marked *

Bestsellers

Compare

DSO138 2.4" TFT Handheld Pocket-size Digital Oscilloscope Kit DIY Parts Electronic Learning Set Soldered

1,982.40
(0 Reviews)
Features :
  1. This kit uses ARM Cortex-M3 processor (STM32F103C8), and includes a 2.4-inch color TFT display screen, can be used as the ARM test development board.
  2. Can be secondary development on the basis of this kit, for example, it can be changed to Milli voltmeter, data loggers.
  3. Adjustable vertical displacement, and with instructions.
  4. With automatic, regular and one-shot modes, easy to capture the moment waveform.
  5. Available rising or falling edge trigger.
  6. Observable previous trigger waveform (negative delay).
  7. Can freeze at any time waveform display (the HOLD function).
  8. Comes 1Hz /3.3V square wave test signal source.
  9. With waveform parameter digital display, including frequency, period, pulse width, duty ratio, MAX./MIN./AVG./Peak-Peak/virtual values.
Compare

DT830D Digital Multimeter

234.82
(0 Reviews)
Specifications:
  • Type: Digital
  • Size: 21X15X5cm
  • Voltage Rating: 1000Vdc/750Vac Rms
  • Impedance: 1MOhm
  • Requires a 9V Battery
  • Capacity:
        • 200 mV, 2000mV, 20V, 200V and 1000V (DC Voltage),
        • 200µA, 2000µA, 20mA, 200mA and 10A (DC Current),
        • 200V and 750V (AC Voltage),
        • 200, 2000 Ohms, 20, 200 and 2000KOhms (Resistance)
Compare

LC100A 2.5" LCD Digital High Precision Inductance/Capacitance (L/C) Meter

1,698.02
(0 Reviews)
Features:
  1. Supply voltage: 5V.
  2. Interface to the power supply: Mini USB or Φ5.5 DC Socket.
  3. Display: 1602 LCD.
  4. Effective display digits: 4 digits.
  5. LC Resonance measurement method of capacitance, Inductance and Large Inductance.
  6. Charge-discharge method of measurement of large capacitance.
Compare

0.28 inch DC 100V 100A LED Digital Ammeter-Voltmeter With Shunt

620.00
(0 Reviews)
Specifications:
  1. Operating Voltage: 5V DC.
  2. Current Consumption: <60mA
  3. Testing Voltage: 0-100V
  4. Testing Current: 1-100A
  5. Easy to read even in dim light
Compare

Meco 101B+ Digital Multimeter Pocket Size

1,829.00
(0 Reviews)
Specification:
  • LCD With Backlight.
  • APO, Capacitance, Frequency.
  • Duty Cycle: 0.1-99%.
  • SP Function: Diode test, Audible Continuity, Data Hold.
  • Low Battery is Indicated.
  • Battery Life: 200 Hours Typical.
  • Measuring Category: CAT III 600V, CAT II 1000V.
Compare

0.28inch Red 3.5-30V Two Wire DC Voltmeter

167.56
(0 Reviews)
Specifications:
  1. Operating Voltage: 3.5-30 VDC
  2. It is a 2-wire display.
  3. LED Color: RED
  4. Current Consumption : < 15 mA.
  5. Accuracy: 0.1 V.
  6. Refresh Speed : Approx 200mS/time.
  7. The display on Voltage: 2.5 V.(but not measure accurately up to 3.6V).

Back to Top
Product has been added to your cart