| MODEL | PWM 10A | PWM 20A | PWM 30A | PWM 40A | PWM 50A | PWM 60A |
| Battery Voltage | 12V 24V Auto | |||||
| Charging Current | 10A | 20A | 30A | 40A | 50A | 60A |
| Discharging Current | 10A | 10A | 10A | 20A | 30A | 30A |
| Max Solar input | 50V(for 24V battery) 25V(for 12V battery) | |||||
| Equalization | 14.4V(Sealed) 14.2V(Gel) 14.6V(Flood) | |||||
| Float charge | 13.7V(default, adjustable) | |||||
| Discharge stop | 10.7V(default, adjustable) | |||||
| Discharge reconnect | 12.6V(default, adjustable) | |||||
| Charge reconnect | 13V | |||||
| Voltage of open light | Solar Panel 8V(Light lights delay) | |||||
| Voltage of close light | Solar Panel 8V(Light off delay) | |||||
| USB output | 5V/3A | |||||
| Self-consume | <10mA | |||||
20A Solar Charge controller : Solar charger controller are UL 1741 certified, the solar charger controller compatibility with 12V 24V system. Discharge Current: 10A,build-in industrial micro controller, automatically manage the working of solar panel and battery in solar system. Dual USB output 5V/2.5A (max), to support mobile phone charging.
Multiple Protection Functions: Solar controller has short-circuit protection, open-circuit protection, reverse protection, over-load protection. Fully 3-stage PWM charge management, improve system efficiency and prolong the life span of the battery.
Battery Type: The charge regulator is only suitable for lead-acid batteries: OPEN, AGM, GEL, it is not suited for nickel hydride, lithium, Li-ions, or other batteries. For protecting the lifespan of your battery, once the voltage of the battery drop below 8V, the solar controller will turn off automatically.
LCD Display: Comes with a display that can clearly indicate the status and data, it can be conveniently switched modes and parameter configuration, suitable for home, industrial, commercial etc.
Easy to Install and Operate: The charge controller should connect the battery first, then the solar panel, and finally the load. The disassembly sequence is contrary to the wiring order. Dual mosfet Reverse current protection, low heat production.
Note: The charge controller will heat up when it is running. Please be careful to install the charger controller on a flat, well-ventilated place.
Reviews
There are no reviews yet.