Due to the COVID 19 epidemic, orders may be processed with a slight delay

Search

In Stock

Micro Submersible Water Pump 3-9V

Specifications:

  1. Operating Voltage : 3 ~ 6V
  2. Operating Current : 130 ~ 220mA
  3. Flow Rate : 80 ~ 120 L/H
  4. Maximum Lift : 40 ~ 110 mm
  5. Continuous Working Life : 500 hours
  6. Driving Mode : DC, Magnetic Driving
  7. Material : Engineering Plastic
  8. Outlet Outside Diameter : 7.5 mm
  9. Outlet Inside Diameter : 5 mm

88.38

Compare
SKU:cds-m-fb-mswp-3-9v

Micro DC 3-6V Micro Submersible Pump Mini water pump For Fountain Garden Mini water circulation System DIY project.

This is a low cost, small size Submersible Pump Motor which can be operated from a 3 ~ 6V power supply. It can take up to 120 liters per hour with very low current consumption of 220mA. Just connect tube pipe to the motor outlet, submerge it in water and power it.

Make sure that the water level is always higher than the motor. Dry run may damage the motor due to heating and it will also produce noise.

Reviews

There are no reviews yet.

Write a review

Your email address will not be published. Required fields are marked *

Bestsellers

Compare

Micro Submersible Water Pump 3-9V

88.38
(0 Reviews)
Specifications:
  1. Operating Voltage : 3 ~ 6V
  2. Operating Current : 130 ~ 220mA
  3. Flow Rate : 80 ~ 120 L/H
  4. Maximum Lift : 40 ~ 110 mm
  5. Continuous Working Life : 500 hours
  6. Driving Mode : DC, Magnetic Driving
  7. Material : Engineering Plastic
  8. Outlet Outside Diameter : 7.5 mm
  9. Outlet Inside Diameter : 5 mm
Compare

12V 5010 Cooling Fan for 3D Printer

99.12
(0 Reviews)
Features:
  • Perfectly fit on the extruder
  • Noiseless Performance
  • Very low Current consumption
  •  Easy to install and connect.
  • Long Connecting Wire
Compare

R365 Pump

198.24
(0 Reviews)
Specifications:
  • Working voltage: DC 12 V
  • No-load current: 0.23 A
  • Maximum flow: 2-3 liters / minute
  • Maximum pressure at the outlet: 1-2.5 kg
  • Maximum lift: 1-2.5 meters
  • Normal working hours: 2-3 years.
  • Maximum suction: 2 meters
  • Inlet and outlet diameter: 8mm outer diameter
  • Motor length: 32MM
  • Motor diameter: 28MM
  • Pump length: 36MM
  • Total length: 69MM
  • Pump diameter: 40MM * 35MM
  • Weight amounts: 111 g
  • Main Color: Silver Tone, White
  • Material : Metal, Plastic
  • Life: up to 2500 Hours
Compare

12V Mini Air Pump DC Blower for Robotics ; DIY Hobby Projects

177.00
(0 Reviews)
Specifications:
  • Operating Voltage: 6V
  • Current Consumption: approx.: 0.15 Amp
  • Medium: Air
Compare

R385 DC Water Diaphragm Pump 12V

198.24
(0 Reviews)
Specifications:
  • Pump Size: 90 mm * 40 mm * 35 mm
  • Outlet diameter: inside diameter of 6 mm, an outer diameter of 8.5 mm
  • Working voltage: DC 12V, current work: 0.5-0.7A (6W power must achieve above)
  • Traffic: 1.5-2L / Min (left and right), the maximum suction lift: 2 m
  • Head: Vertical up to 3 meters
  • Work life: up to 2500H
  • Withstand water temperature: up to 80 ℃
  • Maximum suction: 1-2L/Min, Power: 5W-12
Compare

15L High Flow 555 Vacuum Pump, Air Pump, Oxygen Pump, Fish Tank Folding

859.04
(0 Reviews)
  1. Operating voltage: 12 VDC
  2. Rated current: 800mA
  3. Inflation time: <6 seconds (from 0 to 300 mmHg in a 1000CC closed container)
  4. Minimum pressure: >400 mmHg (53.33KPa)
  5. Hermeticity: <5mmHg (from 1000mmHg in 1000CC container min), airtight only for inflation
  6. Flow rate: >15 L/Min
  7. Noise: <55dB (test at 30cm distance)
  8. Lifetime: 100,000 cycles tested
Compare

Turbo Fan BLOWER 12V 4020 2Pin

199.42
(0 Reviews)
Specifications:
  • Fan dimension: 40 x 40 x 20 mm
  • Voltage: 12V DC

Back to Top
Product has been added to your cart