Due to the COVID 19 epidemic, orders may be processed with a slight delay

Search

In Stock

10 Kg.cm 360 Deg MG995R Servo Motor

Specifications:

  1. Model: MG995R
  2. Weight: 55 gm
  3. Operating voltage: 4.8V~ 7.2V
  4. Servo Plug: JR
  5. Stall torque @4.8V : 9.4kg-cm
  6. Stall torque @6.6V : 11kg-cm

413.00

Compare
SKU:cds-m-sm-360d-mg995r

Tower Pro MG995 – Continuous Rotation 360° Metal Gear Servo Motor is a high-speed standard servo can rotate 360 degrees. You can use any servo code, hardware or library to control these servos, so it’s great for beginners who want to make stuff move without building a motor controller with feedback & gearbox, especially since it will fit in small places. The MG995 Metal Gear Servo also comes with a selection of arms and hardware to get you set up nice and fast.

The optimized performance and reliability of this servo have made it the favourite choice of many RC hobbyists. It is a Digital Servo Motor that receives and processes PWM signal faster and better. It equips sophisticated internal circuitry that provides good torque, holding power, and faster updates in response to external forces.

Wire Description

RED – Positive

Brown – Negative

Orange – Signal

Reviews

There are no reviews yet.

Write a review

Your email address will not be published. Required fields are marked *

Bestsellers

Compare

FEETECH FS6535M 35KG 180° HIGH TORQUE ANALOG SERVO FOR LARGE SCALE BIG RC ROBOT ? FS6535M

2,950.00
(0 Reviews)
Specifications:
  1. Small analog metal gears servo 2BB.
  2. Operating Voltage:4.8-6Volts.
  3. Interface: (like JR).
  4. Wire length: 25cm.
  5. Operating Voltage Range – 4.8V & 6V.
  6. Stalling torque : 27.5(kg-cm) @ 4.8V ; 33(kg-cm) @ 6V.
  7. Stalling current : 3.8 A.
  8. No load speed : 0.27±0.03(sec/60°).
  9. Weight : 199g(1.88oz).
  10. Size : 65.8×30.4×57.6mm.
  11. Application : For robot/industry.
  12. Direction :CCW.
  13. Operating Angle :180degree.
  14. Required Pulse :500us-2500us.
  15. Bearing Type :2BB.
  16. Gear Type :Metal.
  17. Motor Type :Carbon.
  18. Connector Wire Length :30 cm.
  19. Rotation angle(standard) : CW 90±5°
Compare

Feetech FT5335M 40kgcm 180° Ultra-High-Torque, High-Voltage Digital Giant Servo

3,068.00
(0 Reviews)
Specifications:
  1. Running angle of approximately 120°
  2. Servo pulse range of 900 µs to 2100 µs
  3. 12″ (30 cm) cable Length
  4. 550 oz-in at 7.4V or 480 oz-in at 6 V Torque
Compare

Feetech Servo FT6560M 60kg RC Servo High Torque Metal Gear Digital RC Servo Core Motor

4,012.00
(0 Reviews)
Specifications:
  1. Model: FT6560M
  2. Voltage: 7.4V
  3. Torque: 60kg.cm
  4. Size: 65.8x30x57.4 mm
  5. Weight: 200 g
  6. Speed: 0.15sec/60
Compare

FUTABA S3003 Servo Motor 180°

413.00
(0 Reviews)
Specifications:
  1. Modulation: Analog
  2. Operating Voltage: 4.8-6.0 Volts
  3. Torque:4.8V: 44.0 oz-in (3.17 kg-cm),6.0V: 57.0 oz-in (4.10 kg-cm)
  4. Speed:4.8V: 0.23 sec/60°,6.0V: 0.19 sec/60°
  5. Gear Type:Plastic
  6. Rotation/Support:Bushing
  7. Rotational Range:60°
  8. Pulse Cycle:30 ms
  9. Pulse Width:500-3000 µs
  10. Motor Type: 3 Pole Ferrite
Compare

10 kg.cm 180 Deg MG996R Servo Motor

400.02
(0 Reviews)
Specifications:
  1. Operating voltage: 4.8 V a 7.2 V
  2. Running Current 500 mA – 900 mA (6V)
  3. Stall Current 2.5 A (6V)
  4. Temperature range: 0 °C – 55 °C
  5. Control System: Analog
  6. Operating Angle: 120degree
  7. Required Pulse: 900us-2100us
  8. Direction: CCW
  9. Operating speed: 0.17 s/60º (4.8 V), 0.14 s/60º (6 V)
  10. Dead band width: 5 μs
  11. Wire length: 30cm
  12. Connector: 3 pin ‘S’ type female header
  13. Weight: 55 g
  14. Dimension: 40.7 x 19.7 x 42.9 mm approx.
  15. Stall torque: 9.8 kgf·cm (4.8 V ), 11 kgf·cm (6 V)
Compare

Standard Servo-TowerPro SG-5010(180° Rotation)

298.54
(0 Reviews)
Specifications:
  1. Model: SG5010
  2. Weight: 39 gm
  3. Operating voltage: 4.8V~ 6V
  4. Servo Plug: JR
  5. Stall torque @4.8V : 5.5kg-cm
  6. Stall torque @6.6V : 6.5kg-cm
Compare

10 Kg.cm 360 Deg MG995R Servo Motor

413.00
(0 Reviews)
Specifications:
  1. Model: MG995R
  2. Weight: 55 gm
  3. Operating voltage: 4.8V~ 7.2V
  4. Servo Plug: JR
  5. Stall torque @4.8V : 9.4kg-cm
  6. Stall torque @6.6V : 11kg-cm

Back to Top
Product has been added to your cart