A float switch is a device used to sense the level of liquid within a tank.The switch may actuate a pump, an indicator, an alarm, or other device. Use them with hydroponics, saltwater tank, freshwater tank, gardening, aquariums for power head control, pet bowls, fish tanks, filtration, heating, pumps, ponds, basement alarms, boats, air condition drain pans, pressure washers, carpet cleaning mach, reef aquarium, fluid control, ice machines, coffee pots, marine, automotive, automobiles, tropical fish tanks, evaporator coils, condensation line, in relays, or what ever your project may be.It can be easily converted from normally open to normally close by inverting the float.
In Stock
Float Sensor Water/Liquid Level Switch White (30 MM)
Specifications:
- Contact Rating: 10 W.
- Switching Voltage: 220 V.
- Switching Current: 0.5 A.
- Breakdown Voltage: 220 VDC.
- Carry Current: 1 A.
- Contact Resistance: 100 mΩ.
₹212.40
CompareBestsellers
Compare
YF-S201 Water Flow Measurement Sensor with 1-30Liter/min Flow Rate - White
₹274.94(0 Reviews)
Specifications:
- Working Voltage: DC 5V~24V
- Maximum Working Current: 15mA @ 5V DC
- Flow Rate Range: 1~30L/min
- Threads: External 1/2″
- Connection: Threads External 1/2″
- Inlet Water Pipe Diameter: 2.5-4mm
- Load Capacity: ≤10mA (DC 5V)
- Operating Temperature: ≤80℃
- Liquid Temperature: ≤120℃
- Operating Humidity: 35%~90%RH
- Water Pressure: ≤1.75MPa
- Storage Temperature: -25~+ 80℃
- Storage Humidity: 25%~95%RH
Compare
Raindrop Water drop Sensor
₹100.30(0 Reviews)
Features
- Function: rain detection and rainfall intensity measurement and monitoring
- Weight: aprx 8g
- PCB or module size: 30mm x 16mm
- Control board size: 54mm x 40mm
- Colour and shape: as shown in image
- Package contains: 1 x control board, PCB board module and 2 X female to female jumper wire
Compare
Soil Moisture Sensor Module
₹100.30(0 Reviews)
Specifications:
- Input operating voltage: 3.3 to 5V
- 4 Hardware Connection
- The sensor has a 3-Pin male header.
- The pins are as follows VCC (external 3.3V-5V) GND (external GND)
- DO-board digital output interface (0 and 1).
Compare
Turbidity Sensor
₹1,099.76(0 Reviews)
Specification
- Ratio Range (NTU):0-1000±30
- Analog Output
- Infrared Emitting Diode:940nm(Peak emission wavelength)
- Photo Transistor:880nm(Peak emission wavelength)
- Vcc: 5V
- Output Voltage: 0-5V
- Reverse Voltage: 5V
- Operating Temp:-20~+90
Compare
Turbidity Sensor With ADC Circuit
₹1,799.50(0 Reviews)
Specifications:
- Operating Voltage: 5V DC
- Operating Current: 40mA (MAX)
- Response Time : <500ms
- Insulation Resistance: 100M (Min)
- Output Method:
- Analog output: 0-4.5V
- Digital Output: High/Low-level signal (you can adjust the threshold value by adjusting the potentiometer)
- Operating Temperature: 5Ԩ~90Ԩ
- Storage Temperature: -10Ԩ~90Ԩ
- Weight: 30g
- Adapter Dimensions: 38mm*28mm*10mm/1.5inches *1.1inches*0.4inches
Compare
Turbidity Sensor with Module
₹894.98(0 Reviews)
Specifications:
- Operating Voltage: 5VDC.
- Current: 30mA (MAX).
- Operating temperature: -30 ° C to 80 ° C.
- Compatible with Arduino, Raspberry Pi, AVR, PIC, etc.
- Measuring Range: 0 ~ 1000 NTU.
Compare
WATER FLOW SENSOR BIG YFG1
₹802.40(0 Reviews)
Specifications:
Mini. Working Voltage: DC 4.5V
Working Voltage: DC 5V~18V
Flow Rate Range: 2~100L/min
Water pressure resistance: = >2MP
Operating Temperature: = -20~85C
Insulation resistance: = >100MΩ
Characteristics of Flow pulse: f=(4.8*Q) Q=L/Min
Accuracy: ±3%
Connector type: G1
Reviews
There are no reviews yet.