Due to the COVID 19 epidemic, orders may be processed with a slight delay

Search

In Stock

12v 40W Ceramic Cartridge Heater

Specifications:

  1. Voltage(V)-12
  2. Power(W)-40
  3. Lead Length(mm)-20
  4. Lead Diameter(mm)-6
  5. Wire Length(cm)-100
  6. Lead Material-Stainless Steel

148.68

Compare
SKU:cds-s-th-12v-40w-cch

The 12v 40W Ceramic Cartridge Heater is a powerful little beast of a heater. Get rid of fragile and poor tolerance enamel resistors and switch to a purpose made high power ceramic heater cartridge. Increase the reliability of your extruder with this heater cartridge. Also, it heats up faster. It fits nicely in our extruder, so it’s an easy replacement. Get your hot end hot quickly and hit the highest of temperatures. Comes with a meter of silicone insulated high-temperature wire.

Cartridge heaters consist of a cylindrical stainless steel tube and thus provide a high corrosion prevention. The heating wire inside which is wound onto a ceramic core. The choice of coils varies depending at the power, and provide an excellent uniform distribution of heat, which considerably increases the long life of the heater in addition to prevents the oxidation of the heater wire even at high temperatures.

Package Includes :

1 x 12v 40W Ceramic Cartridge Heater.

Reviews

There are no reviews yet.

Write a review

Your email address will not be published. Required fields are marked *

Bestsellers

Compare

DHT22 Module Temp & Humidity Sensor

330.40
(0 Reviews)
Specifications:
  1. Supply voltage: 5V
  2. Temperature range:-40-80℃ resolution0.1℃ error <±0.5℃
  3. Humidity range: 0-100%RH resolution0.1%RH error±2%RH
  4. The sequence of the line: VCC, GND, Signal
  5. Size: 38 x 20mm
Compare

NTC 5mm 10K

15.34
(0 Reviews)
Features
  • Resistance at 25 degrees C: 10K +- 1%
  • B-value (material constant) = 3950+- 1%
  • Dissipation factor (loss-rate of energy of a mode of oscillation) δ th = (in air)approx.7.5mW/K
  • Thermal cooling time constant <= (in air) 20 seconds
  • Thermistor temperature range -55 °C to 125 °C
Compare

Digital Thermometer Water Proof TPM-10 (Includes Battery)

189.98
(0 Reviews)
Specifications:
  1. Temperature range: -50°C ~ +110°C
  2. Temperature display resolution: ±0.1
  3. temperature measurement accuracy: 1°C
  4. Cable Length: 1M
  5. Display Dimensions : 48 x 29 x 16 (LxWxH) mm.
  6. The module is powered by a pair of LR44 button batteries (battery included)
Compare

NTC Thermistor 5K Temperature Sensor

11.80
(0 Reviews)
Features:
  • Resistance at 25 degrees C: 5K +- 1%
  • Thermistor temperature range -55 °C to 125 °C
  • Come with broad resistance range
  • Thermistor cost is economical
  • Provided with lacquer-coated thermistor disk
  • Copper leads have coating of tin.
  • Having lead spacing of 5.0 mm
  • Component remarked with resistance and tolerance
  • Good stability, durability in environment
  • Provide high accuracy in resistance and B-constant
Compare

DS18B20 Temperature Sensor Module

207.68
(0 Reviews)
Specifications:
  • Programmable Digital Temperature  Sensor
  • Communicates using 1-Wire method
  • Operating voltage: 3V to 5V
  • Temperature Range: -55°C to +125°C
  • Accuracy: ±0.5°C
  • Output Resolution: 9-bit to 12-bit (programmable)
  • Unique 64-bit address enables multiplexing
  • Conversion time: 750ms at 12-bit
  • Programmable alarm options
  • Available as To-92, SOP and even as a waterproof sensor
Compare

NTC Thermistor Temperature Module

100.30
(0 Reviews)
Features
  • NTC thermistor sensor, good sensitivity
  •  The comparator output signal is more than 15mA.
  •  Possible to adjust the temperature distribution position detection threshold
  •  Working voltage: 3.3V-5V
  •  Output form: DO digital switching outputs (0 and 1) and AO analog voltage output
  •  Fixed bolt hole for easy installation
  •  Small PCB board size: 3.2cm x 1.4cm
  •  uses a wide voltage comparator LM393
Compare

HDM-230B Temperature and Humidity Sensor Module

295.00
(0 Reviews)
  • A humidity sensing component, polymer humidity resistance “HR” ;
  • Power Supply: 5VDC ± 5%;
  • Current Consumption: 5mA max. (2mA avg.);
  • Storage Condition Temperature: Between -20 degC and -70 degC;
  • Humidity: Below 95% RH;

Back to Top
Product has been added to your cart