Due to the COVID 19 epidemic, orders may be processed with a slight delay

Search

In Stock

Voice Reconigation Module V3

Specifications

  • Voltage: 4.5-5.5V
  • Current: <40mA
  • Digital Interface: 5V TTL level for UART interface and GPIO
  • Analog Interface: 3.5mm mono-channel microphone connector and microphone pin interfac
  • Size: 31mm x 50mm
  • Recognition accuracy: 99% (under ideal environment)

2,489.80

Compare
SKU:cds-s-ss-vrm-v3

ELECHOUSE Voice Recognition Module is a compact and easy-control speaking recognition board.
This product is a speaker-dependent voice recognition module. It supports up to 80 voice commands in all. Max 7 voice commands could work at the same time.

Any sound could be trained as command. Users need to train the module first before let it recognizing any voice command.

This board has 2 controlling ways: Serial Port (full function), General Input Pins (part of function). General Output Pins on the board could generate several kinds of waves while corresponding voice command was recognized.

User Manual download Here

Reviews

There are no reviews yet.

Write a review

Your email address will not be published. Required fields are marked *

Bestsellers

Compare

MP3-TF-16P MP3 SD Card Module with Serial Port

198.24
(0 Reviews)
Specifications:
  1. Input Supply voltage (V): 3.2 ~ 5
  2. DAC output: 24-bit
  3. SNR: 85 dB
  4. Operating Temperature (°C) : -40 ~ +70
  5. Humidity Range: 5% ~ 95%
  6. Supports sampling rates (KHz): 8 / 11.025 / 12/16 / 22.05 / 24/32 / 44.1 / 48
Compare

PAM8403 5V TWO CHANNEL STEREO MINI CLASS-D 3W+3W AUDIO AMPLIFIER

73.16
(0 Reviews)
Specifications:
  1. Operating Voltage Range: 5V – 5.5V.
  2. Max Gain: 24 dB
  3. Current Handling Capacity: 8 mA
  4. Efficiency: 87 %.
  5. Amplifier: IC PAM 8403.
  6. Load Can direct drive 4 or 8 ohm small speakers.
Compare

Pam8403 mini 5v digital amplifier board with switch potentiometer

106.20
(0 Reviews)
Specifications:
  • Updated version, quality is improved! Everything you need except a power supply for adding sound to a project..
  • PAM8403 – Powerful and small Class D amplifier mounted on a 28 x 20 mm breakout board. Includes a super smooth potentiometer combination volume / on-off knob. Also includes header pins..
  • Mini speakers – 2 pcs. 4 ohm, 3w, 31 mm x 70 mm. The same speakers found in flatscreen TV’s and monitors..
  • 3.5 mm cord – Includes 50 cm (19 in) headphone style cord and plug for easy phone or Raspberry Pi connection.
Compare

Raspberry Pi USB Plug and Play Desktop Microphone

198.24
(0 Reviews)
Specifications:
  •  Sensitivity: -47dB ± 4dB
  •  Sensitivity reduce: -3dB at 1.5V
  •  Working Voltage: 4.5V
  •  Frequency response: 100 ~ 16kHz
  •  SNR: More than -67dB
  •  Cable length: 0.7-0.9M
  • The effective distance of 2 meters or more
Compare

Sound Detection Module Sensor for Intelligent Vehicle Compatible With Arduino

97.94
(0 Reviews)
Specifications:
  1. Signal output Indication
  2. Single channel signal output
  3. The output effective signal is low level.
  4. Main chip: LM393, Electret condenser microphone
  5. Working voltage: DC 3.3-5V
  6. Induction distance is 0.5m
Compare

Sound Sensor Module Digital Output

100.30
(0 Reviews)
Specifications:
  1. Working voltage: DC 3.3-5V.
  2. Signal output indication.
  3. The output is digital.
  4. Single-channel signal output.
  5. With the retaining bolt hole, convenient installation.
  6. Output low level and the signal light when there is sound.
Compare

6-12VDC Mini Microphone Pickup Aerial Audio Signal Collection For Camera FPV QAV250 mini Quadcopter

198.24
(0 Reviews)
Specifications:
  • Supply Voltage: 6-12VDC
  • Frequency Range: 100-5500 Hz
  • Output: 2.5Vpp/-25db
  • Low noise
  • High fidelity
  • Wide working voltage range
  • Low power consumption
  • Long transmission distance

Back to Top
Product has been added to your cart