Magic Light Cup Module is a board which has a led and a mercury tilt switch. Using PWM to drive the LEDs on the module user can achieve the effect of light being “magically” transferred from one module to the other when tilting them. In short, it’s 2 components combined, a mercury tilt switch and a led. On tilting the module mercury inside small tube connect the switching point and make switch ON while tilting it to other side move the mercury and it disconnects the circuit and switch get OFF. The module operates on 5V DC supply.
In Stock
Magic Cup Light Module
Specifications:
- Operating voltage: 3.3V to 5.5V
- Dimension: 1.5cm x 3.6cm
- Weight: 10 g
₹48.38
CompareBestsellers
Compare
Magic Cup Light Module
₹48.38(0 Reviews)
Specifications:
- Operating voltage: 3.3V to 5.5V
- Dimension: 1.5cm x 3.6cm
- Weight: 10 g
Compare
Photosensitive Resistor Sensor Module for Arduino
₹49.56(0 Reviews)
Features:
- The photosensitive device, its photocurrent increases with the applied voltage.
- the temperature coefficient. Photoelectric effect photoresistor influenced by temperature, partial photoresistor optoelectronic at low temperatures
- Higher sensitivity, whereas the sensitivity at high temperatures, are lower.
- rated power. Refers to the rated power for a certain line photoresistor allowed power consumed when the temperature rises.
- High, its power consumption is reduced.
- According to the spectral characteristics of the photoresistor has three photoresistors: Ultraviolet photosensitive resistance, infrared light-sensitive resistors, Visible photosensitive resistance.
Compare
Single LDR Sensor only 10mm
₹47.20(0 Reviews)
Features:
- The low cost sensor device
- Wide spectral response
- Use in fire alarms, smoke alarms, control street light
- Low cost.
- Ambient Temperature Range.
- Wide spectral response.
Compare
20mm GL20528 Light Sensitive Photoresistor LDR
₹88.50(0 Reviews)
Specifications:
- Model: GL20528 ( GM20528 )
- Size: 20mm
- Max. voltage: 500 VDC
- Max. power: 500 mW
- Spectrum Peak Value (nm): 560
- Light resistance ( KΩ) : 10–20 kΩ
- Dark resistance ( KΩ): 2 kΩ.
- Υ value : 0.6.
- Increase response time: 30 mS.
- Decrease response time: 30 mS.
Compare
LDR 5mm Sensor only
₹14.16(0 Reviews)
Specifications:
- Diameter: 5mm
- No. of Pins: 2
- Type of Mounting: PCB Through Hole
- Maximum Operating Temperature: +800°C (Approx.)
- Dark resistance:1-20 Mohm
Compare
LDR Sensor Module
₹100.30(0 Reviews)
Specifications:
- LDR module 4 PIN
- Operating voltage 3.3V-5V
- Signal output indicator light.
- LDR module 4 PIN
- Able to detect ambient brightness and light intensity Adjustable sensitivity (via blue digital potentiometer adjustment)
Reviews
There are no reviews yet.