Due to the COVID 19 epidemic, orders may be processed with a slight delay

Search

In Stock

E18-D80NK IR Proximity Sensor (PNP)

Specifications:

Sensing range: 3 – 80cm.
Input voltage: 5VDC.
Current Consumption: 100mA.
Digital Output.
Cable length: 115 cm.
Diffuse reflective type
Digital output
Adjustable detection distance

306.80

Compare
SKU:cds-s-ims-pnp

The Adjustable Infrared Sensor Switch is a set of transmitter and receiver in one of the photoelectric switch sensor. The detection distance can be adjusted according to the demand. The sensor has a detection range of 3-80cm. The Adjustable Infrared Sensor Switch is small, easy to use, inexpensive, easy to assemble and can be widely used in a robot to avoid obstacles, interactive media, industrial assembly lines, and many other occasions. The switching signal output differs in accordance with the obstacles. It remains high when no obstacles and remains low when there are obstacles. There is a bright light behind the probe to detect the scope of 3cm – 80cm.

Connection
Red wire: +5V
Green wire: GND
Yellow wire: Digital output

OR

Brown wire: +5V
Blue wire: GND
Black wire: Digital output

Reviews

There are no reviews yet.

Write a review

Your email address will not be published. Required fields are marked *

Bestsellers

Compare

HX1838 VS1838 NEC Infrared IR Remote Control Sensor Module For arduino

145.14
(0 Reviews)
Specifications:
  1. Crystal: the oscillation frequency of 455
  2. Encoding: the encoding format of the NEC, upd6122 encoding scheme, the user code 00FF, key coding below
  3. Button: free height is less than 3mm, the force 200-350g, the life of more than 200 000
  4. Photo-detector and preamplifier in one package
  5. Internal filter for PCM frequency
  6. Improved shielding against EMI
Compare

Line Follower Sensor Single Array Grey Robotics High Quality

108.56
(0 Reviews)
Specifications:
  1. Operating Voltage: 5V
  2. Supply Requirement: 20mA
  3. Output Voltage range: 0 to 5V
  4. Recommended sensing distance: 5mm
  5. Maximum sensing distance: 12mm
  6. Operating wavelength: 920mm
  7. Distance between two sensors: 18mm
  8. Dimension: 20 x 20mm
  9. Weight: <10gms
Compare

CJMCU-GUVA-S12SD Sunlight Ultraviolet Ray Intensity UV Sensor

554.60
(0 Reviews)
Specifications:
  1. Power supply voltage of 2.5 V ~ 5 V
  2. Low power consumption
  3. Wide detection range: 240 nm to 370 nm
  4. Wide Angle: 130 degrees
  5. Schottky type photosensitive diode
  6. Good linear response
  7. High sensitivity
Compare

TCRT5000 Reflective IR sensor photoelectric switch-5pcs

69.62
(0 Reviews)
Specifications:
  1. Operating Voltage Range: 3.6 to 5V DC
  2. Average Current Consumption: 60mA
  3. Color Black + blue
  4. Detecting range: 0.591″ (15 mm)
  5. Detecting method: Reflective
  6. Collector-Emitter: Voltage: 70V
  7. Collector Current: 100mA
  8. Forward Current: 60mA
  9. Output type: Phototransistor
Compare

Infrared IR Wireless Remote Control Module Kit for Arduino

129.80
(0 Reviews)
Specifications:
  1. Battery: CR2025 160mAh button battery
  2. Effective angle: 60°
  3. Sticking material: 0.125mmPET
  4. Effective life: 20,000 times
  5. Static current: 3uA – 5uA
  6. Dynamic current: 3mA – 5mA
  7. Transmission distance: up to 8m(depending on the surrounding environment, sensitivity of receiver etc)
Compare

Line Following Sensor 6 Array High Quality Grey Robotics

767.00
(0 Reviews)
Specifications
  • Operating Voltage: 5V
  • Supply Requirement: 210mA
  • Output Voltage range: 0 to 5V
  • Recommended sensing distance: 5mm
  • Maximum sensing distance: 12mm
  • Operating wavelength: 920mm
  • Distance between two sensors: 18mm
  • Dimension: 100 x 20mm
  • Weight: <10gms
Compare

CJMCU-TEMT6000 An Ambient Light Sensor

129.80
(0 Reviews)
Features:
  1. AEC-Q101 qualified
  2. High photosensitivity
  3. Near-Human Eye Spectral Response
  4. Scalable Output Voltage
  5. Adapted to human eye responsivity
  6. Lead (Pb)-free reflow soldering

Back to Top
Product has been added to your cart