Due to the COVID 19 epidemic, orders may be processed with a slight delay

Search

In Stock

E18-D80NK IR Proximity Sensor (NPN)

Specifications:

  1. Sensing range: 3 – 80cm.
  2. Input voltage: 5VDC.
  3. Current Consumption: 100mA.
  4. Digital Output.
  5. Cable length: 115 cm.
  6. Diffuse reflective type
  7. Digital output
  8. Adjustable detection distance

306.80

Compare
SKU:cds-s-ims-npn

The Adjustable Infrared Sensor Switch is a set of transmitter and receiver in one of the photoelectric switch sensor. The detection distance can be adjusted according to the demand. The sensor has a detection range of 3-80cm. The Adjustable Infrared Sensor Switch is small, easy to use, inexpensive, easy to assemble and can be widely used in a robot to avoid obstacles, interactive media, industrial assembly lines, and many other occasions. The switching signal output differs in accordance with the obstacles. It remains high when no obstacles and remains low when there are obstacles. There is a bright light behind the probe to detect the scope of 3cm – 80cm.

Connection

Red wire: +5V
Green wire: GND
Yellow wire: Digital output

OR

Brown wire: +5V
Blue wire: GND
Black wire: Digital output

Reviews

There are no reviews yet.

Write a review

Your email address will not be published. Required fields are marked *

Bestsellers

Compare

IR Sensor Digital Single Array Line Sensor

46.02
(0 Reviews)
Features:
  1. There is an obstacle, the green indicator light on the circuit board
  2. Detection distance: 2 ~ 30cm
  3. Detection angle: 35 °
  4. Comparator chip: LM393
  5. 3mm screw holes for easy mounting
Compare

Auto-Calibrating Line Sensor LSS05

1,038.40
(0 Reviews)
Specifications:
  1. 5V power, reserve polarity protected
  2. 5 digital outputs representing the logic of 5 IR sensor, represented with indicator each.
  3. Calibration button for easily calibrating the sensor
  4. Dimensions: 64x28x10 (LxWxH) mm.
  5. Weight: 8 gm.
Compare

SmartElex RLS-08 Analog & Digital Line Sensor Array - High Quality

446.04
(0 Reviews)
Specifications:
  1. Operating voltage: 4.5V to 5.0 V
  2. Supply current: 150 mA
  3. Output format: 8 Analog and Digital voltages.
  4. Optimal sensing distance: 3 mm.
  5. Maximum recommended sensing distance: 6 mm
  6. Potentiometer to adjust the sensitivity of the individual sensors.
  7. Uses 8 sensors for best resolution
  8. Comes with easy to use digital outputs that can be connected directly to microcontrollers
Compare

HB100 Microwave Doppler Radar Wireless Motion Sensor

336.30
(0 Reviews)
Specifications:
  1. Low current consumption (typical 30 mA)
  2. CW or pulse operation
  3. Flat profile
  4. Long detection range (20 m)
  5. Supply voltage: 4.75V to 5.25V
  6. X-Band Frequency: 10.525 GHz
  7. Minimum Power Output: 13 dBm EIRP
Compare

Bracket for Pyroelectric Infrared PIR Motion Sensor Detector Module HC-SR501

59.94
(0 Reviews)
Features:
  1. Material: Acrylic
  2. Dimensions: 50 x 40 x 18 (LxWxH) mm.
  3. Weight: 8 gm
Compare

TCRT 5000 Module Line Sensor High Quality

95.58
(0 Reviews)
Features
  • TCRT5000 reflective optical sensor
  • Line follower robots, sumo/mini sumo robots
  • Digital output
  • Operating Voltage: 5V
  • Operating Current: <10mA
  • Size: 30 mm x 16 mm

Back to Top
Product has been added to your cart