Due to the COVID 19 epidemic, orders may be processed with a slight delay

Search

In Stock

HL-340 USB serial port (COM) USB to RS232 USB Nine Serial Line Support Windows 7-64

Features :
Single crystal 12M Tablet 340 USB port to serial port communication.
USB1.1/2.0 compliant solution.
Built-in 128 byte TX/512 byte RX buffer.
Supports the auto-Handshake Protocol.
Support Win95/98/98se/ME/2000/XP/win7 32bit 64bit/Vista/supports full-speed USB data transfer protocol.
Design of electromagnetic interference.
Data Exchange application.

198.24

Compare
SKU:cds-pi-hl-340

This is HL-340 USB serial port (COM) USB to RS232 USB Nine Serial Line Support Windows 7-64. USB to RS232 conversion cable for USB and serial devices easily connect serial devices with features such as Plug and play, hot-swappable.

Can meet the notebook connected to the serial device, apply to mini-phones, digital cameras, communication MODEM, ISDN terminal adapters, LED control card.

Package Includes :
1 x HL-340 USB serial port (COM) USB to RS232 USB Nine Serial Line Support Windows 7-64.

Reviews

There are no reviews yet.

Write a review

Your email address will not be published. Required fields are marked *

Bestsellers

Compare

USB Blaster ALTERA CPLD/FPGA Programmer

696.20
(0 Reviews)
Features:
  1. Operating Voltage: 1.5~5V JTAG IO Voltage.
  2. System configuration: Windows XP, Windows Vista, Windows7, USB interface.
  3. Stably support SignalTap II embedded logic analyzer function, no mistake while crawling data.
  4. Fully support all Altera products such as CPLD: MAX3000, MAX7000, MAX9000 and MAXII.
  5. FPGA: Stratix, StratixII, StratxIII, Cyclone, CycloneII, CycloneIII, ACEX1K, APEX20K and FLEX10K etc.
  6. Active serial configuration device: EPCS1, EPCS4, EPCS16, EPCS64 etc.
  7. Enhanced configuration devices: EPC1, EPC4.
  8. Supports 3 download mode: AS, PS and JTAG.
Compare

I2C ADS1115 16 Bit ADC 4 Channel Module With Programmable Gain Amplifier For RPi

297.36
(0 Reviews)
Feature: Wide supply range: 2.0V to 5.5V Low current consumption: Continuous Mode: Only 150uA Single-Shot Mode: Auto Shut-Down Programmable data rate: 8SPS to 860SPS Internal Low-drift voltage reference Internal oscillator Internal PGA I2C interface: Pin-Selectable Addresses Four Single-ended or two differential inputs Programmable comparator This board/chip uses I2C 7-bit addresses between 0x48-0x4B, selectable with jumpers
Compare

PL2303HXD 6Pin USB TTL RS232 Convert Serial Cable

324.50
(0 Reviews)
Specifications:
  1. Input Supply voltage: 3.3.~ 5 V
  2. Connector type: USB To TTL RS232
  3. Cable length: 80 Cm
  4. Supports RS-232 serial interface with Programmable baud rate from 75 bps to 12 Mbps
  5. Compatible with the RS422/RS485 interface
  6. The cables provide a fast, simple way to connect devices with a TTL level serial interface to USB
  7. It is USB 2.0 full speed compatible. The USB side of the cable is USB powered.
Compare

ADS1115 16 Bit I2C ADC Analog to Digital Converter Module

374.00
(0 Reviews)
Features:
  • Single-shot mode: automatically turns off
  • Low current consumption: Continuous mode 150 μA
  • Wide supply voltage range: 2.0V to 5.5V
  • Interfacing is done via I2C
  • Programmable data rate: 8SPS to 860SPS
  • Low drift internal voltage reference
  • Internal Oscillator
  • Internal PGA up to 860 samples per second (SPS)
  • Four single-ended or two differential inputs (ADS1115)
  • Operating temperature : -40 ° C to + 140 ° C
  • Programmable comparator
Compare

USB RS232 To TTL

250.16
(0 Reviews)
Features :
  1. Built-in TTL COM Chip.
  2. Standard USB type and TTL 4 pin connector
  3. Simple and Easy way to give USB support to your designs
  4. Available for Linux, Mac, WinCE, and Windows (XP, 7), Win 8
Compare

I2C IIC Module for 1602 2004 LCD

76.70
(0 Reviews)
Specifications: 5V power supply. Serial I2C control of LCD display using PCF8574. Backlight can be enabled or disabled via a jumper on the board. Contrast control via a potentiometer. Can have 8 modules on a single I2C bus (change address via solder jumpers) address, allowing. Size: 41.6 x 19.2 mm.

Back to Top
Product has been added to your cart